Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


Virtual Devices

The category contains virtual devices submitted by users.
Downloading and submission terms have to be accepted.
Types of files accepted: LUA, VFIB, ZIP, TAR, RAR, JSON.
Virtual devices have to be described properly, screen shots are optional.
Support topics are created automatically here Virtual devices
Report topics and files that are no longer supported by authors.
All the files submitted have to be approved by administrators.

82 files

  1. CAN-bus_BMS.vfib

    CAN-bus_BMS.vfib

    38 downloads

       (0 reviews)

    0 comments

    Submitted

  2. Heating

    Heating VD, which I use especially when I go on winter holidays.
    On the day of departure we have no time to adjust heating, so a few days before using this VD I set the date/time when the heating should be turned off and date/time when it should be turned on again. Of course you can use this VD everyday just to turn on/off heating or to set the heating timer on/off.
     
    When it turn off the heating it just turn on vacation mode for every zone.
     
    Features:
    instant turn on/off the heating in all zones set the date and time when the heating will be turned off and/or turned on _ - change on/off setting time ❌ - clear timer ♻️ - refresh button - you don't need to touch it. It's called programmatically displaying the current state (on/off) sending push messages about changing heating state (by scheduler)  
    Customization:
    change the VD labels to your own language set mobile device id to get push messages about changing heating state -- USER MODIFICATION local pushDeviceId = 0 -- mobile device id to send push messages local scheduleFreq = 1 -- [min] -- END OF USER MODIFICATION Screenshot:

     
    Icon:

    Enjoy...

    108 downloads

       (0 reviews)

    0 comments

    Updated

  3. Odczyt czujników jakości powietrza z AIRLY.EU

    Urządzenie wirtualne odczytująca parametry jakości powietrza z najbliższego czujnika sieci AIRLY.EU
     
    Wirtualne urządzenie odczytuje z ustawień centralki jej współrzędne geograficzne i znajduje najbliższy czujnik w promieniu 5 km.
     
    Jedynym ustawieniem użytkownika jest wpisanie klucza API dla AIRLY.EU w kodzie LUA (jest to odpowiednio opisane).

     

    85 downloads

       (0 reviews)

    0 comments

    Submitted

  4. COVID-19 Stats suite

    COVID-19 Stats suite standalone
     
    INTRODUCTION
    COVID-19 Stats suite consists of virtual device and two scenes. It is using free COVID-19 API released by Kyle Redelinghuys. VD is getting back details about global and regional coronavirus data, including latest numbers that are updated close to real-time by gathering information from Johns Hopkins CSSE.
     
    PREREQUISITES Fibaro Home Center 2 with firmware 4.580 or greater
    Sankortonic Lab. Emoji VD standalone
     
    FEATURES
    COVID19 Stats suite is getting details about global and regional corona virus spread and show them on Fibaro mobile app or browser connected to HC2 home page.
    Uses COVID-19 API built by Kyle Redelinghuys to show latest data on corona virus spreading.
    Provides total global pandemic numbers for total and new cases, total and new deaths and total and new recovered cases and total active cases.
    Provides user to select default country to monitor corona virus latest numbers
    Provides user to check corona virus latest numbers for 190 countries worldwide.
    Provides global variable trigger that user can setup to be updated either by global total active cases or their default country active cases. This trigger can then be used to start scene that will send notifications using any available service.
    Multilingual support with 27 languages included. VD can use HC2 selected language or user can select any other available language. VD will be automatically translated to selected language
    Easy setup for VD icons
    Global variables are automatically created, monitored and repaired.
     
    INSTALLATION
    Please check provided User Manual
     
    PACKAGE CONTENT
    COVID-19 Stats VD COVID-19 Stats scene COVID-19 Triggered scene Icon pack for VD and scene User manual EN Updated code for scene and VD main loop and Update button  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the COVID-19 Stats suite. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.

    211 downloads

       (1 review)

    0 comments

    Updated

  5. Jakość powietrza Głównego Inspektoratu Ochrony Środowiska

    VD wyświetlające jakość powietrza w Polsce wg. stacji GIOS. Poprzez GIOS dane są pobierane raz na godzinę z WIOS więc nie ma potrzeby częściej odpalać głównej pętli niż jest ( a przy większej niż kilka zapytań z jednego IP na godzinę blokują dostęp)
    Konfiguracja - utworzyć zmienną globalną "powietrze". W polu IP VD wpisujemy adres serwera (obecnie api.gios.gov.pl), w polu PORT wstawić kod stacji pomiarowej z której interesują nas pomiary. Kody stacji pomiarowych są wysyłane na adres email administratora (id2) po wciśnięciu przycisku "Lista stacji". Ręczne pobieranie danych przycisk "Pomiar"
    W VD pod przyciskiem "Pomiar" trzeba sobie ustawić ID do powiadomień przez PUSH i EMAIL po każdej zmianie warunków powietrza, oraz ID ikon do wyświetlania.
     
    W pliku zip ikony do VD
     
    /Wątek przeniesiony z FIBARO Aktualizacja/Rozwiązania Społeczności/Urządzenia Wirtualne/Jakość powietrza v0.2 wg Głównego Inspektoratu Ochrony Środowiska/
    jakosc powietrza - ikony.zip

    55 downloads

       (0 reviews)

    0 comments

    Submitted

  6. Smarter Coffee VD

    Smarter Coffee VD
     
    Hello friends of Fibaro and a good cup of coffee!!!
     
    When I became proud owner of Smarter coffee machine, I didn't know that Smarter is making smart appliances that are actually not connectible to home automation. I have ask them several times if they plan to publish coffee machine API or what ever is needed so that it can became connected part of our every day smarter home. What is the use of smart coffee machine if you have to grab mobile phone every morning in bed to tell it that you want coffee to be brewed!! The answer was always "maybe soon". So I get tired of waiting!
     
    I was intensively searching the wast land of internet and just few days ago finally stumble on at least some kind of solution provided by Simone Margaritelli the evilsocket and Aden Forshaw. Of course their solution is written in python but for me is unacceptable to have additional server even on small PI just to start coffee machine. So done little experimenting because this coffee machine has really simple commands in bytes where first byte is command and last byte is marking end of command. Here is what evilsocket and Aden found and I provide translation to our LUA language with this little knowledge I have just in case if you want to experiment further or do similar VD for iKittle 2:
     
    -- Smarter coffee commands: command - hexadecimal - decimal format used in LUA -------------------------------------------------------------------------------------- brew = "7" = "7" reset = "\x10" = "\16" get wifi aps = "\xD" = "\13" toggle grind = "\x3c\x7e" = "\60\126" set strength = "\x35%\x7e" = "\53\%\126" where % = 0-2 (weak, mid, strong) set cups = "\x36%\x7e" = "\54\%\126" where % = 1-12 cups set config = "\x38\%1\%2\%3\%4\x7e" = "\56\%1\%2\%3\%4\126" where %1 = strength %2 = cups %3 = mode (grind, filter) %4 = warm time warm % min = "\x3e%\x7e" = "\62\%\126" where % = 1-30 min warm stop = "\x4a\x7e" = "\74\126" -- Smarter coffee response response - hex - decimal counterpart ------------------------------------------------------- brewing or OK = "\x03\x00~" = "\3\0~" already brewing = "\x03\x01~" = "\3\1~" invalid argument = "\x03\x04~" = "\3\4~" no carafe = "\x03\x05~" = "\3\5~" no water = "\x03\x06~" = "\3\6~" low water = "\x03\x07~" = "\3\7~" reset ok = "\x03i~" = "\3i~" -- In LUA backslash \ is used to mark byte in the string so it cannot stand alone or be -- last character in string like this: "\" or this "\56\". ''So this is problem if you want -- to combine different values in string commands like for changing number of cups -- since it is impossible to join "\54\" ..cups.. "\126". 'Only possibility that -- came across my mind is to use table with predefined strings for coffee strenght, -- number of cups and Keep wamring time as listed bellow. local comm = "\56"; local cups = {"\1", "\2","\3", "\4","\5", "\6","\7", "\8","\9", "\10", "\11", "\12"}; local stre = {"\0", "\1","\2"}; local mode = {"\0", "\1"}; local time = {"\5", "\10", "\15", "\20", "\25", "\30", "\35", "\40"} local endb = "\126" -- example of building command for setting coffee machine default settings local command = comm..stre[2]..cups[2]..mode[1]..time[1]..endb I should actually put this part in developer section but here it is for those of you who like to play with it.
     
    So here it is SMARTER COFFEE VD V0.1 first release
     
    Smarter_coffee.vfib.json
     
    To be able to use this VD you will need following devices:
    1) HC2 - VD will work only on HC2 due to LUA code (Will try to do HCL version but will not be with all possibilities as LUA version)
    2) Smarter Coffee machine with latest firmware V 22.0 (will work with older version but you will not be able to stop Keep warming or set it to 40 min)
    3) FGWP smart plug or any other similar. It is needed to monitor coffee machine consumption from which is determined if it is brewing, keep coffee warm or stopped
     
    Also after importing VD to your system you need to setup IP address and TCP port. Since it is not possible to get IP address of your precious coffee machine from original app you will need some other app to find it for you. I used Fing on my iPhone. TCP port is 2081. And it should be entered on advanced tab of the VD:

     
    Before you start using VD first you will need to define some global variables in global variable panel. I was planning to add code to do that part for you, but since Fibaro is constantly changing API on HC I decided to leave this part to you. Besides you can put values of global variables in your language but then you will also have to change few things in code of each button and main loop. Will explain later what to change.
     
    So this are global variables that are needed for Smarter coffee VD to work properly:
     
    First are variables (top part in panel):
    Name of variable - possible value that you must enter when adding (DO NOT leave 0 if is not possible value!!)
    -----------------------------------------------------------------------------------------------------------------------------
    SmarterCups       - possible values: between 1 and 12. Do not leave 0. Keeps number of cups of coffee.
    SmarterStrength  - possible values: 0 - Weak, 1 - Medium or 2 - Strong.  Keeps value of coffee strength
    SmarterWarm      - possible values: 5, 10, 15, 20, 25, 30, 35 and 40. Keeps time for how long coffee will be kept warm
     
    Following are predefined global variables (bottom part in panel):
    Name of variable - possible values that you must enter in order I put them here bellow.  
    -----------------------------------------------------------------------------------------------------------------------------
    SmarterBrewed   - possible values: No, Yes. Used to prevent starting brewing twice in a row. This is filter coffee and filter is better to cleaned after each use.
    SmarterDefaults  - possible values: table that contains coffee machine default values for strength, number of cups, mode (Filter or Grind) and time to Keep warm. You need to define only one value with name Table and then save. Open again to edit and then delete Value2. VD will take care of the rest.
    SmarterMode      - possible values: Filter, Grind. It is self explanatory  
    SmarterPush       - possible values: No, Yes. It is used to send push notification only ones from VD main loop when coffee is ready
    SmarterStatus     - possible values: Ready, Not ready, Brewing, Keep warm, Faulty, No carafe, No water, Low water. Status of the machine.
    SmarterUseDef   - possible values: No, Yes. If using default values then VD needs to restore to those values after brewing is finished.
     
    For global variables SmarterBrewed, SmarterMode and SmarterStatus you can use words in your language but if you do then you will have to change in code as follows:
    -- GLOBAL VARIABLES -- enter names and value mapping of your -- global variables or leave as it is and add to variables panel -- "SmarterStatus" is predefined global variable. Enter your -- name and mapping of values local smarterStatus = "SmarterStatus"; -- change value mapping to corresponds to your values in your global variable local smarterStatusMapping = {ready="Ready", notready="Not ready", brewing="Brewing", warming="Keep Warm", faulty="Faulty", nocarafe="No carafe", nowater="No water", lowater="Low water"}; -- "SmarterMode" is predefined global variable local smarterMode = "SmarterMode"; -- change value mapping to corresponds to your values in your global variable local smarterModeMapping = {filter="Filter", grind="Grind"}; -- "SmarterWarm" is global variable possible value 5 to 40 in -- step of 5 local smarterWarm = "SmarterWarm"; -- "SmarterBrewed" is predefined global variable used to change -- machine status local smarterBrewed = "SmarterBrewed"; -- change value mapping to corresponds to your values in your global variable local smarterBrewedMapping = {Yes="Yes", No="No"}; and this has to be done in all code for each button and main loop!
     
    Next step is to add icons and then do mapping of their IDs in the code. Here are the icons in order and with their names in code:
    Main icon that you will set as default on the VD and all buttons except on button Brew and Keep warm:

    In code is named iconBrewing so you will need ID and also set it up on Brew button:

    In code is named iconWarming so you will need ID and also set it up on Keep warm button:

    in code is named iconNoCarafe so you will need ID:

    in code is named iconLoWater and ID is needed:

    in code is named iconNoWater and ID is needed:

    in code is named iconFilter0 you need ID and it is showing setting for Weak strength and Filter mode:

    in code is named iconFilter1 you need ID and it is showing setting for Middle strength and Filter mode:

    in code is named iconFilter2 ID is needed and it is showing setting for Strong coffee and Filter mode:

    in code is named iconGrind0 ID is needed and it is showing setting for Weak coffee and Grind mode:

    in code is named iconGrind1 Id is needed and it is showing setting for Medium coffee and Grind mode:

    and the last one is named in code iconGrind2 Id needed and is showing setting for Strong coffee and Grind mode:

     
    How to get icon ID is explained many times here on forum so I will skip that. After you get ID of all icons then you need to replace them in main loop and for buttons Brew, Keep warm, Weak, Medium, Strong, Change mode, Reset machine and main loop. Code is well commented and looks like this:
    -- VD ICONS ---------------------------------------------------- -- enter ID numbers of corresponding icons on your system local iconBrewing = 1041; local iconWarming = 1042; local iconNoCarafe = 1044; local iconFilter0 = 1045; local iconFilter1 = 1046; local iconFilter2 = 1047; local iconGrind0 = 1048; local iconGrind1 = 1049; local iconGrind2 = 1050; local iconLoWater = 1051; local iconNoWater = 1052; And before you can start enjoying your coffee there is one more touch that needs to be done. You need to go to main loop code and first setup smart plug ID. Look for this code in main loop:
    -- SMART PLUG -------------------------------------------------- -- enter ID nuber of smart plug to which Smarter cofee is -- connected. Smart plug is the only way to check machine status -- at the present moment so it is needed for proper functioning -- of this VD local plugID = 135; Then if you want to be notified by VD when coffee is ready then find this code and enter ID of your mobile devices to which will be send. You can put as many as you like between brackets {} just separate them by comma eg. {2, 45, 121}:
    -- PUSH NOTIFICATIONS ------------------------------------------ -- define users that will receive push notifications when -- coffee is ready if leaved empty no notification will be send local userID = {} -- enter default flags: 1 - will send, 0 - will not send -- must be same number of flas as users local userFlag = {}; -- enter push message text that will be sent when coffee is -- ready local pushMessage = "Coffee is ready!" -- here you can put code that will change flags to whom push -- notification will be sent function setupUsers() -- here you can put code to dynamically change which users -- will get push notifications if you use flags end If you want to change who will receive push notifications you can use variable userFlag for that. For each userID you can enter 1 to send push notification or 0 not to send. Then you can add some code in function setupUsers() where you can change flags as you wish. For example I use that code to stop receiving push notifications when I'm away from home. If you don't need this feature then just leave brackets empty. And of course you can change message for pushMessage to your language.
     
    And if you want to completely translate VD to your language you just need to check all code for this part:
    -- MESSAGES ---------------------------------------------------- -- enter messages in your language -- response messages from coffee machine local _respBrewing = "Brewing"; local _respAlready = "Already brewing"; local _respInvalid = "Invalid argument"; local _respNocarafe = "No carafe" local _respNowater = "No water"; local _respLowater = "Low water"; local _respResetOK = "Reset OK"; local _respCheck = "Check machine"; local _respFailed = "Transfer failed"; -- command sent by this button local _command = "Brew"; -- coffee machine status messages local _statReady = "Ready"; local _statNotready = "Not ready - fill in coffee"; local _statBrewing = "Already brewing!"; local _statWarming = "Warming coffee!"; local _statFaulty = "Faulty - check machine"; local _statNocarafe = "No carafe - put it back"; local _statLowater = "Warning! - Low water"; local _statNowater = "No water - fill tank"; I try to make it easier for you as much as I could in this four days of development so all messages I collected on beginning of the code. Some buttons have more messages, some don't so you better check them all.
     
    At the end just short explanation how it works. Before first run, you will need to check if settings in VD corresponds to machine settings by checking display on the machine or original app. When this is synced you can start using it.
     
    Before first brewing status of VD must be Ready. If it is not you can press button Reset status to just reset VD or Reset machine to reset all to factory settings. Reseting machine will clear all default settings so you will need to send them again by pressing button Set above as default after you make your favorite choice of strength, cups and mode. This default settings will be always set back after brewing coffee no matter what settings was for the last brew. After brewing coffee status of the VD will be always set to Not ready except if there is No carafe in place, or No water or Low water. After rectifying cause: placing carafe in place, filling water and cleaning filter you will need to press button Reset status to put it back into Ready state. If this is too annoying you can always setup some short scene that you will trigger with some switch, button or swipe or whatever and reset VD to Ready status. If you want to keep coffee warm after brewing you can do that by setting time and then pressing button Set above as default so warming will start immediately after brewing, or you can setup time and then press button Keep warm. If during Keep warm you press button Keep warm again this will stop warming but only with new machine firmware. Keep warming time can be set up to 40 minutes. And that's it!
     
    Enjoy coding and coffee!!!  
     
    EDIT
    Still working on 4.180
     

    65 downloads

       (1 review)

    0 comments

    Updated

  7. Ambient Weather Station VD

    Ambient Weather Station VD standalone
     
    INTRODUCTION
    Ambient Weather station (AWS) VD reads measurements provided by Ambient weather stations which are connected to ambientweather.net service on internet. VD is tested with Ambient Weather station WS-1401-IP OBSERVER, but should also work with other similar types of Ambient weather stations.
     
    PREREQUISITES
    Fibaro Home Center 2 with firmware 4.560 or greater
    Emoji VD standalone must be downloaded and installed for AWS VD to function properly.
    At least one Ambient weather station connected to internet and user application key and API key
     
    FEATURES
    User can install multiple instances of VD for as many Ambient Weather stations he/she might have. Uses ambient weather cloud API to retrieve latest measurements. Provides measurements in imperial or metric units and also wind speed in m/s. Provides global variables for indoor and outdoor temperature, indoor and outdoor humidity, wind and gust speed, rain event, solar radiation, UV, outdoor and indoor PM25 and CO2 that can be used to trigger block or LUA scenes for specific user actions. Multi-language support with 27 languages included (see APPENDIX 1 for the list). VD can use HC selected language or user can select any other available language. VD will be automatically translated to selected language Easy setup for VD icons (on UHAS™ compatible version is this even easier) Global variables are automatically added, monitored, repaired and cleaned and does not require user intervention  
    INSTALLATION
    Please check provided User Manual
     
    PACKAGE CONTENT
    Ambient Weather Station VD v1.1 Icon pack User manual EN  
    TERMS AND CONDITIONS
    Permission to use, copy, modify and distribute this software and its documentation for educational, research, personal use and non-profit purposes, without fee and without a signed licensing agreement is hereby granted, provided that the copyright notice, with "Terms and conditions" and "Disclaimer" appear in all copies, modifications and distributions. It is strictly forbidden to sell, rent, lease and/or lend this software for profit without prior consent from the Author.
     
    DISCLAIMER
    This software is provided by copyright owner "as is" and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. In no event shall the author and distributor be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to, procurement of substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the use of this software, even if advised of the possibility of such damage.
    Fibar Group S.A. and their employees are not responsible for support of the ABC VD. Please contact the author Sankotronic, on the Fibaro Forum, for any questions or support required.
     

    80 downloads

       (0 reviews)

    0 comments

    Submitted

  8. [VD] Daily Triggers

    Daily Triggers
    First release on french board in April 2018
     
    INTRODUCTION
    This VD was my first contribution on the french forum. I was so glad! I learnt to use LUA tables just before and I wanted to use them in a VD which can be useful.
    This VD allows you to easily manage some one-time actions for each day in a week. With it, you quickly can change the time to trigg one or many actions, or see when an action will be done. It's possible to set one our per day, using a time shift if needed.
    It's my first VD, I was learning how to program in LUA and I was beginning to work with time in LUA, so it's not perfect in the programming way, but it works! I used it for a long time and I have never met any issue!
     
    INSTALLATION
    Create a Global Variable called VD_TRIGGERS Import the VD Change the Icons ID in the Main Loop, using the icons below -- Icons IDs local icone_ok = 1156 local icone_wait = 1158 local icone_no_trigg = 1155 local icone_triggers_off = 1157 local icone_vd_off = 1160 Add your to-do actions for each day with the totrigg() function, into the Main Loop -- To do each day local function totrigg(day) -- Here actions for everyday if day == 1 then -- Actions for Monday elseif day == 2 then -- Actions for Tuesday elseif day == 3 then -- Actions for Wednesday elseif day == 4 then -- Actions for Thursday elseif day == 5 then -- Actions for Friday elseif day == 6 then -- Actions for Saturday elseif day == 7 then -- Actions for Sunday end end  
    VD CONFIGURATION AND USE
     
    This VD is divided into 4 parts :
    Information about the next trigger The Programmer View on all triggers set Enable/Disable VD  

     
    3 Sliders and the OFF button can be used to prepare trigger informations : Hours Sliders will convert 0-100 value to 1 - 23 in the programmer Minutes Sliders will convert 0-100 value to 1 - 59 in the programmer Time Shift Sliders will convert 0-100 value to -30 - +30 in the programmer Please take care to set 0 (Slider at 50) if you want to trigg your actions at the time set! OFF Button will replace all the programmer's informations by OFF If you want to set a new time information, you only need to click on any slider above After each slider move, check the Prog Label content to avoid any error Once the Prog content is correct and checked, you can affect its value for each day you want by simply clicking on its name! You will be able to see the affected times just 3 seconds after in the Triggers Views At this time, the actions set in the totrigg() function will be done Of course, if the VD is disabled, no actions will be triggered  
    ICONS

     
    Waiting to trigg today's action Today's action triggered No action planned today (OFF) All triggers set at OFF VD OFF

    63 downloads

       (0 reviews)

    0 comments

    Updated

  9. sprinkler

    VD to handle sprinklers

    195 downloads

       (0 reviews)

    0 comments

    Submitted

  10. Manage_pincode_lock

    Virtual device to manage user codes for YALE locks

    148 downloads

       (0 reviews)

    0 comments

    Submitted

  11. Enphase Envoy solar panel VD

    Attached a simple VD to show you the output of your Enphase Envoy solar panel. It shows the current W, today's kWhs, and last 7 days kWhs. Enter  in the 'Advanced'  tab of the VD the ip address of your Enphase Envoy box. TCP port can be left blank.
     
    Also attached a basic icon to use.
     
    Best, Rene.

    103 downloads

       (0 reviews)

    0 comments

    Updated

  12. IONIZING RADIATION LEVEL MONITOR

    This Virtual Device reads the information on the level of ionized 
     radiation from the http://radioactiveathome.org/map/ .
     There are sensors distributed all over Europe, some in US, 
     Japan and other countries.
     
     For the VD to be functional the following has to be adjusted:
     
     The global variable 'temprad" has to be created
     Icon of the slider has to be updated as ' yellow radiation with timer'
     The code has to be adjusted in USER CONFIG Section (Values marked with ENTER in comments).
     ThingSpeak API Key if one wants to push data to ThingSpeak
     IDs of the Icons (green, yellow, orange, red, yellow with timer)
     Coordiantes of the locaton of the sensor 
     How to know where are the sensors located and how to get their 
     coordinates :
     
     The map of the sensors is at: http://radioactiveathome.org/map/
     
     Click on the dot of the sensor you want to know the location ID
     You will see the popup with the information of the sensor. 
     Note 'Details Sensor' number
     
     You need to see the source of the http://radioactiveathome.org/map/
     Enter 'view-source:http://radioactiveathome.org/map/' 
     into the browser (eg. Chrome)
     Press Ctrl-F to find the sensor number you noted earlier
     Next to the number found you will see the coordinates
     Enter coordinates into the code below.

     What is new in version 0.67:
     - Multilangual support
    What is new in version 1.67:
     - The VD is not anymore auto-refreshed 
       with the time interval set by slider, but 
       it is refreshed by pressing a button.
       This is to have it triggered by Main Timer Scene
    What is new in version 1.68:
      - German translation added (by gobbli of forum.fibaro.com) 
    What is new in version 1.69:
       - Dutch and Slovak translation added (by Bodyart of forum.fibaro.com) 
       - Italian and Croatian translation added (by Sankotronic of forum.fibaro.com) 
     
     Credits to:
     andre                    from forum.lic.pl -  author of the idea
     rusconidesigner   from forum.fibaro.com  - author of the multicolor radiation icons
     gucio1234            from forum.fibaro.com & forum.lic.pl  -  who make final version of the VD
     Sankotronic         from forum.fibaro.com - who make some changes + Croatian and Italian translation
     jompa68              from forum.fibaro.com - from whom I got multilangual concept
     gobbli                  from forum.fibaro.com - author of Deutsch translation
     Bodyart               from forum.fibaro.com - author of Dutch and Slovak translation
     

     

     

     




     
     
     
     
     
     
     

    35 downloads

       (0 reviews)

    0 comments

    Updated

  13. [VD + SCENE + PHP] APC UPS Monitor and auto shutdown of HC2

    PREFACE :
    I noticed in the Forum that there is some interest for link APC UPS with Fibaro HC2 and have auto shutdown of HC2 if there is no electricity.
     
    I have spent few evenings and I am happy to share what I did.
     
    I want to thank @Sankotronic  for the permission to use part of his code and @Lambik whose icons of UPS I used as a base to create icons representing various status of the UPS device.
    Also I have used a bit of the code of @drboss .
     
    INTRODUCTION :
    The proposed solution reads the status of the UPS device using SNMP protocol and based on this it triggers appropriate actions.
    The status of UPS is represented with the various icons of the VD :
     
    Email messages and pop-up notifications are sent whenever :
                there is electricity outage           the battery level is critical and HC2 shutdown is triggered         the power is restored The status is updated whenever the REFRESH button of VD is pressed.
    For constant monitoring I have used @Sankotronic’s scene „Main Timer“ which presses the button every minute.
     
     
     
    WHAT WE NEED :
    1.
    On HC2 -  we need :
    -       VD for UPS monitoring and triggering actions
    -       Scene to trigger Shutdown of HC2.
     
    2.
    We need web server with PHP Module running on something.
     
     
    It can be RaspberryPI, Windows PC or anything.
     
     
    In my case I have it on iMac and I followed this guide :
     
    https://medium.com/@JohnFoderaro/how-to-set-up-apache-in-macos-sierra-10-12-bca5a5dfffba 
     
    I skipped "Configuring Virtual Hosts" as that was not working for me.
    As my web server is accessible only by my devices, I did not care.
     
    Important is that apache web server is managing PHP scripts .
     
    3.
    SNMP command line tool has to be present on the server (it is present by default on OS X)
     
                  SNMP tool is present by default with OS X.
     
                  Here are links describing how to install it for Windows  -  different resources (not tested) :
     
                  https://www.ipconvertertools.com/snmpwalkinstructions
                  https://syslogwatcher.com/cmd-tools/snmp-walk/
          
    4.
    APC UPS with network management card.
    The presented solution was implemented and tested with APC Smart UPS 3000  with Network Management Card AP9631
     
     
     
    IMPLEMENTATION :
    1.
    Implement web server with PHP module running.
     
    Activate SNMP command line tool on your server (if not already there).
     
    2.
    Copy APC.php script to the web server.
    You have to edit the file with any text editor to provide username and password for your HC2, IPs of HC2 and UPS.
    If username or password contain `@` it has to be replaced with `%40‘
    Eg. If Your username is `[email protected]` You have to enter `user%40`
    Note: You have to make a note of the path to the script.
     
    Here is a code :
     
     
    3.
    Create new scene in HC2 for auto shutdown.
     
     
    IMPORTANT:  You have to pay attention NOT TO CHECK MARK that the scene is starting while HC2 starts.
    The HC2 would restart itself after boot.
    If you do so you have to do restore to factory state and load last working backup.
     
    4.
    Import the VD from the attached .vfib file to your HC2.
    Import all provided icons for graphical representation of the UPS status.
    There is a bunch of global variables needed, but they will be created automatically by the VD – so you do not have to worry. All of these global variables starts with `UPS_` .
     
     
    Edit the `USER SETTINGS` section of the LUA code for the REFRESH button :
     
    The icon for the REFRESH button should be `IconTimer`.
     
    As the parameters for the VD:
    -       enter the IP address of web server with PHP script
    -       enter 80 as a port number
     
     
    That is all.
    I hope those how are interested will be able to implement what I did.
     

     

    119 downloads

       (1 review)

    0 comments

    Updated

  14. [VD + APP + PHP] Text To Speach (TTS) solution for HC2 and Apple Mac (OS X) - version October 2017

    Text To Speach (TTS) solution for HC2 and Apple Mac (OS X)  - version October 2017:
     
     

     
    PREFACE :
    I am happy to present my second approach for TTS (Text To Speech) and multi room audio for Fibaro HC2 and Apple OS X computer.
    I call it “second approach” rather then second version because it uses different mechanism to control audio of the computer, however the goal remain the same.
    That is also the reason why I decided to publish it in the new thread.
     
    I hope that this guide let you setup TTS on your Fibaro HC2 and Mac computers.
     
     
    INTRODUCTION :
    I have noticed that wide used solution for TTS and multiroom is to use Sonos speakers (probably because of the Fibaro plugin available) and VoiceRSS (http://www.voicerss.org/).
     
     
    My solution is different. It uses the text synthesizer (TTS) which we have already implemented in our computers and which can speak in variety of languages – also those not supported by VoiceRSS. To change text into speech I used “SAY” command of OS X. The other advantage is that we are independent on internet connection and there are no charges for TTS processing. It has also multiroom solution. You can have installed all over your place a number of speakers. The volume of each speaker can be individually adjusted from HC2 (Volume range from 0 to 100 %) so it is possible to select in which room/rooms you hear the voice announcement. 
    If you use the iTunes VD  it is also possible to distribute music.
     
    Integration of iTunes with and HC2 was discussed and published here :
     
     
     
    The supported speakers/devices/protocols are as for now :
    -        Apple AirPlay
    -        Google Chromcast
    -        Bluetooth
    -        Windows computers (with installed app to become AirPlay compatible)
     
     
    The supported languages/voices of OS X v. 10.12.2 (macOS Sierra) are listed in Paragraph 2 below.
     
     
     
    WHAT WE NEED :
    -        Fibaro HC2
    -        Apple Mac computer
    -        Audio Mixer VD installed on HC2
    -        Some LUA experience to fine tune VD on HC2 and have your user defined TTS messages in your scenes
    -        Airfoil by Rouge  Amoeba application installed on Mac - for TTS it is OK to use free demo version
    -        Fibaro TTS Bridge application for OS X by Marcin S. Milewski (gucio1234) installed on Mac
    -        Speakers/audio receivers (any from the list of compatible devices) :
    .    Apple AirPlay
    .    Google Chromcast
    .       Mac , Windows or Linux computer with Airfoil Satellite installed  
    ( see https://rogueamoeba.com/airfoil/ )
    .       iOS or Android device with Airfoil Speakers installed
    (if one wants to have TTS on mobile device)
    .    Bluetooth
     
     
    The presented solution was tested with the following software versions / hardware :
    -        Fibaro HC 2   firmware 4.140
    -        Airfoil for Mac v. 5.5.1
    -        Airfoil Sattelite for Windows v.5.1.6
    -        OS X v. 10.12.2 (macOS Sierra) and OS X v. 10.13 (macOS High Sierra)
    -        Apple AirPort versions A1088, A1264, A1392
    -        JBL Flip 3 Bluetooth Speaker
    -        Fibaro TTS Bridge v. 0.1
    -       Fibaro HC 2  v. 4.110
    It was not tested with Google Chromcast (as I do not have any) but this is supported by Airfoil.
     
     
     
     
    IMPLEMENTATION :
    Please read the whole instruction carefully before you start.
     
     
         1.      
           Define the global variable “PAMessage”  in your HC2 (top part of the Variables’ Panel):
    This variable will store the text you want to convert  to speech, whatever is there, the system will speak when you press TTS button of the VD
     
     
    2.
     
    Test and select desired language/voice for your TTS.
    To change text into speech we used “SAY” command of OS X.
     
     
    Open “Terminal “ application on your Mac.
    Type ‘SAY –v ?’  to see the list of available voices/languages
    Type ‘SAY –v <name of the voice>’ to select the voice of your preference
    Type ‘SAY “THIS IS A TEST MESSGE IN MY LANGUAGE” ’ to test your selected voice
     
     
    More details on this can be found here: https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPages/man1/say.1.html   
     
    Here is the result of 
    ‘SAY –v ?’ :
     
    3.
     
    Install “Airfoil” for Mac downloaded from  https://rogueamoeba.com/airfoil/ 
     
     
     
     
    NOTE: The free demo version lets to transmit audio up to 10 minutes long (which is more than enough for TTS). After that time the noise distortion will be added by the application.
    If one wants to use Airfoil for transmission of music  it is recommended to purchase a license.
         4.      
    Setup web server with PHP Module running on our Mac computer.
     
    In my case I have it on iMac and I followed this guide :
     
    https://medium.com/@JohnFoderaro/how-to-set-up-apache-in-macos-sierra-10-12-bca5a5dfffba 
     
    I skipped "Configuring Virtual Hosts" as that was not working for me.
    As my web server is accessible only by my devices, I did not care.
     
    Important is that apache web server is managing PHP scripts .
     
    NOTE: If you already implemented iTunes VD, you should have already running web server with PHP module installed.
     
         5.      
    Install Audio Mixer VD on your HC 2.
     
     
     
     
    Define parameters of this VD :
     
    Set IP address of your Apple Mac computer
    Set port number as  7000. The communication between HC2 and Mac will be on port 7000 and this is hard coded in “Fibaro TTS Bridge v..1” application.
    Define in VD as many audio mixer sliders as you have audio devices to be linked with your multi room audio system.
           In the VD attached  FOR EACH SLIDER you have to define the PATH for your PHP script “airfoil.php”.  Also for each slider the local variable ‘pokoj’ has to be defined as substring of the ID of the speakers defined in Airfoil app on Mac.
           (see Paragraph 6 “How to know the IDs of your speakers defined for AirFoil”) 
     
    Example:
    In my case I have my airfoil.php script placed as :
    MacintoshHD/Users/username/Sites/airfoilremote/airfoil.php
    and my path defined in the VD is :
     
    Note :   “LocalSpeaker” is the speaker connected to your Mac.
    Example:
    In my case I have the following local variables for each slider :
     
     
     
    local pokoj = “WIATROLAP"
    local pokoj = “LocalSpeaker"
    local pokoj = "59-a7”
    local pokoj = "POKOJ-3”
    local pokoj = “JADALNIA"
    local pokoj = “AppleTV"
    local pokoj = “ANTRESOLA"
    local pokoj = “MIODARNIA"
     
     
     
    There are three buttons on Audio Mixer VD :
     
     
     
            “Weather Outside”   – to send current weather information to TTS system. In my VD it reads information from Netatmo VD.
                                                  This should be adjusted to user’s preferences.
                                                  User may adjust it to her/his needs at the end when all the rest is up and running.
                                                             
                                                        NOTE: In the code of VD attached it reads the variable from my Netatmo device ID.
                                                                    It will not work for you without fine tuning.
     
     
     
        “Weekday / Time”    – to send TTS with the text taken from HC2 system variables
     
     
     
        “TTS”                        – to send TTS with the text taken from global variable “PAMessage”
    6.
     
    Place the „airfoil.php” file into you OS X computer. The path for it has to match whatever is defined as the path in your VD
    (see example in paragraph 3.)
     
     
     
         7.
         How to know the IDs of your speakers defined for AirFoil
          
          You have to use Apple Script Editor which is application delivered along with your OS X system. no need to purchase or install anything.
          Just use your search bar of OS X system.
     
    You have to write
     
    into Apple Script Editor.
     
         Here is the screen shot of the OS X script editor which shows you the complete IDs of your Airfoil Speakers.
     
     
     
     
     
     
     
     
        You can see that part of each ID  (after @) matches my local variables for each slider of VD.
     
     
         8.
    Setup Airplay/Chromecast/Bluetoth  devices with your Mac 
     
     
    9.
    If you want to have other computers to act as clients with speakers install Airfoil Sattelite for each of them. The app is to be downloaded from https://rogueamoeba.com/airfoil/
     
     
    10.
    If you want to have mobile devices to act as clients with speakers install Airfoil Speakers for each of them. The info on these apps can be found on https://rogueamoeba.com/airfoil/
     
     
     
     
    11.
    Copy the “Fibaro Text to Speech Bridge v.0.1” application to your Mac computer.
     
     
     
     
    Attached is the zipped file. You have to unzip it to have .app file.
     
     
     
     
     
     
     
         NOTE: 
     
         If it happens that HC2 needs to be restarted, it is required to restart “Fibaro Text To Speech Bridge v.0.1”also (Exit and Run).
         Restart of “Fibaro Text To Speech Bridge v.0.1” is to be done after HC2 is back operational.
     
     
     
        FILES TO DOWNLOAD :
     
     
    Application for OS X (zipped) ->   Fibaro_Text-To-Speech_Bridge_0.1.app.zip
     
     
    VD for HC2 ------------------------>   AUDIO_MIXER_+_TTS.vfib 
    ICON for VD of HC2 ------------>     
     
    AIRFOIL.PHP (zipped)  ------>  
    airfoil.php.zip
     
     
     
     
     
     

    37 downloads

       (0 reviews)

    0 comments

    Updated

  15. [VD + APP] Text To Speach (TTS) solution for HC2 and Apple Mac (OS X) - version February 2017

    Text To Speach (TTS) solution for HC2 and Apple Mac (OS X) :

     
     
    PREFACE :
    It took me two months of tests to make this solution at present stage and I had to learn a little Python and Applescript.
    I am aware that lots of details can be improved. However all programmers knows there are no software without bugs and there is never final version. The attached OS X app is fully functional and it is called “Fibaro Airfoil Bridge v.0.1”.
    I had no experience with OS X programming. This is the very first OS X app I wrote.
     
     
    INTRODUCTION :
    I have noticed that wide used solution for TTS and multiroom is to use Sonos speakers (probably because of the Fibaro plugin available) and VoiceRSS (http://www.voicerss.org/).
     
    My solution is different. It uses the text synthesizer (TTS) which we have already implemented in our computers and which can speak in variety of languages – also those not supported by VoiceRSS. To change text into speech I used “SAY” command of OS X. The other advantage is that we are independent on internet connection and there are no charges for TTS processing. It has also multiroom solution. You can have installed all over your place a number of speakers. The volume of each speaker can be individually adjusted from HC2 (Volume range from 0 to 100 %) so it is possible to select in which room/rooms you hear the voice announcement. 
     
    The supported speakers/devices/protocols are as for now :
    -        Apple AirPlay
    -        Google Chromcast
    -        Bluetooth
    -        Windows computers (with installed app to become AirPlay compatible)
     
    The supported languages/voices of OS X v. 10.12.2 (macOS Sierra) :
     
     
    PLANS FOR FUTURE :
    Fine tune the app and improve GUI of Fibaro Airfoil Bridge application.
    Enhance the functionality with multiroom audio with distribution music from internet radio and iTunes.
     
    This is an open project and I count on your constructive comments.
    If there is anybody who would like to be involved in future enhancements please let me know in private message.
     
     
    WHAT WE NEED :
    -        Fibaro HC2
    -        Apple Mac computer
    -        Audio Mixer VD installed on HC2
    -        Some LUA experience to fine tune VD on HC2 and have your user defined TTS messages in your scenes
    -        Airfoil by Rouge  Amoeba application installed on Mac (for TTS it is OK to use free demo version)
    -        Fibaro Airfoil Bridge  by Marcin S. Milewski (gucio1234) installed on Mac
    -        Speakers/audio receivers (any from the list of compatible devices) :
    o   Apple AirPlay
    o   Google Chromcast
    o   Mac , Windows or Linux computer with Airfoil Satellite installed
    o   iOS or Android device with Airfoil Speakers installed (if one wants to have TTS on mobile device)
    o   Bluetooth
     
    The presented solution was tested with the following software versions / hardware :
    -        Airfoil for Mac v. 5.5.1
    -        Airfoil Sattelite for Windows v.5.1.6
    -        OS X v. 10.12.2 (macOS Sierra)
    -        Apple AirPort versions A1088, A1264, A1392
    -        JBL Flip 3 Bluetooth Speaker
    -        Fibaro Airfoil Bridge v. 0.1
    -    Fibaro HC 2  v. 4.110
    It was not tested with Google Chromcast (as I do not have any) but this is supported by Airfoil.
     
     
    IMPLEMENTATION :
    Please read the whole instruction carefully before you start.
     
         1.      
           Define the global variables in your HC2 (top part of the Variables’ Panel):
                      “PAMessage”  - This variable will store the text you want to convert  to speech.
                      “AudioMixer” – This variable will store the audio mixer settings for the devices.
         2.      
    Install Audio Mixer VD on your HC 2.
    Define parameters of this VD :
    Set IP address of your Apple Mac computer
    Set port number as  7000. The communication between HC2 and Mac will be on two ports:  7000 and 7001.
    Define in VD as many audio mixer sliders as you have audio devices to be linked with your multi room audio system. Provide names for each slider corresponding to the devices/rooms you want to control. You may use your local language names, with spaces and local characters.
     
    IMPORTANT:
    Remember what is the order of your sliders. It is needed in next steps for proper link between HC2 and Mac.
     
     
    The LUA code for each slider has to be same but it depends on the number of sliders one has defined. Here are examples :
     
    If there are two sliders, LUA definition for each should be :
     
    If  there are four sliders, LUA definition for each should be :
     
    Adjust the LUA code of each slider according to number of sliders there are  in your VD.
     
    There are four buttons on Audio Mixer VD (they can be adjusted for user’s preferences ):
     
            “Test Message”       – to send a test message to TTS system. In my VD the predefined test message is in Polish. It should be adjusted to your language.
     
        “TTS”                      – to execute TTS with the text taken from global variable “PAMessage”
     
              “Weather Outside” – to send present weather conditions to TTS system. In my case it is based on global weather variables received from Netatmo weather station. The message is in Polish. It should be adjusted to your local language and preferences.
     
         “Send Data”           – to send audio mixer settings from HC2 to Airfoil without processing any TTS
     
     
     
     
         3.
    Test and select desired language/voice for your TTS.
    To change text into speech I used “SAY” command of OS X.
     
    Open “Terminal “ application on your Mac.
    Type ‘SAY –v ?’  to see the list of available voices/languages
    Type ‘SAY –v <name of the voice>’ to select the voice of your preference
    Type ‘SAY “THIS IS A TEST MESSGE IN MY LANGUAGE” ’ to test your selected voice
     
    More details on this can be found here: https://developer.apple.com/legacy/library/documentation/Darwin/Reference/ManPages/man1/say.1.html   
     
         4.
    Setup Airplay/Chromecast/Bluetoth  devices with your Mac 
     
    5.
    If you want to have other computers to act as clients with speakers install Airfoil Sattelite for each of them. The app is to be downloaded from https://rogueamoeba.com/airfoil/
     
    6.
    If you want to have mobile devices to act as clients with speakers install Airfoil Speakers for each of them. The info on these apps can be found on https://rogueamoeba.com/airfoil/
     
     
    7.
    Install “Airfoil” for Mac downloaded from https://rogueamoeba.com/airfoil/
    NOTE: The free demo version lets to transmit audio up to 10 minutes long (which is more than enough for TTS). After that time the noise distortion will be added by the application.
    If one wants to use Airfoil for transmission of music (which I hope will be introduced with future version of my solution)  it is recommended to purchase a license.
     
    IMPORTANT:
    All the names of the audio devices configured with  Airfoil HAVE TO HAVE names of the speakers without spaces and without any special/national characters. Rename the devices in Airfoil if it is needed.
     
     
     
     
    8.
    Copy the “Fibaro Airfoil Bridge v.0.1” application to your Mac computer. DO NOT RUN IT YET.
    Attached is the zipped file. You have to unzip it to have .app file.
     
    IMPORTANT:
    Right click on “Fibaro Airfoil Bridge v.0.1” and select “Show Package Content”
    Navigate to   Contents -> Resources
    Locate the file “SpeakersNAME.txt”
    Edit the file “SpeakersNAME.txt”. Put names of your speakers each in the new line. They have to be same as names defined in Airfoil (paragraph 7.).  The order of the speakers is EXACTLY SAME as order of the sliders of your HC 2 VD “Audio Mixer” (paragraph 2.) .
    NOTE: The very first speaker has to be “LocalSpeaker” which is the default speaker of your Mac computer. This has to be defined even if you do not use the speaker of your Mac.
     
    Here is an example of “SpeakersNAME.txt” file:
    LocalSpeaker JADALNIA AppleTV PC-ANTRESOLA POKOJ-3 WIATROLAP MIODARNIA  
    9.
    After the “SpeakersNAME.txt” is updated one can run “Fibaro Airfoil Bridge v.0.1” applicaton.
     

     
     
         NOTE: 
         If it happens that HC2 needs to be restarted, it is required to restart “Fibaro Airfoil Bridge v.0.1”also (Exit and Run).
          Restart of “Fibaro Airfoil Bridge v.0.1” is to be done after HC2 is back operational.
     
     
     
    IMPORTANT:
    This is known bug with 0.1 version. If you want to close the app use the EXIT button on the main window or the EXIT option of the second pull down menu.
    If you close the app with red circle on top left corner of the application’s window or with the QUIT option from the first pull down menu the application is not closed completely. In this case you have to find its icon on the bottom bar of OS X, right click and force close it .
     
     
     

    16 downloads

       (0 reviews)

    0 comments

    Updated

  16. Daikin SkyFi

    Virtual device for control of Daikin air conditioners with the SKYFi addon. (untested)

    111 downloads

       (0 reviews)

    0 comments

    Submitted

  17. Keyboard

    1. The TCP Port setting is used to store the input timeout in seconds. Adjust as required.
    2. Change the myGlobal button and code to suit the name of the global you wish to set.

    38 downloads

       (0 reviews)

    0 comments

    Submitted

  18. LookO2 - Air Quality Sensor

    ———————————————————————————————————————————————————————
    Current Version: 1.15
    Fibaro Marketplace: https://marketplace.fibaro.com/items/looko2-air-quality-sensor
    ———————————————————————————————————————————————————————
     
    Witajcie,

    Jakiś czas temu poruszałem tu temat pomiaru Czystości Powietrza (szczególnie PM2.5) we własnym mieszkaniu lub na zewnątrz z określonej okolicy.
    W założeniu chodziło o to aby Fibaro potrafiło pobierać dane z własnego czujnika a następnie wyświetlać je i wykorzystywać dalej w działaniu (np. uruchomienie oczyszczacza)
    Nie znalazłem gotowego rozwiązania, a z dostępnych (w racjonalnej cenie) najsensowniejsze wydawało się zastosowanie własnego czujnika Looko2 - z obserwacji, dane wyglądają na dość dokładne,
    stosują dobre czujniki i udostępniają API (tu wymagany token).
    Jak dla mnie idealnie było by, gdyby, przynajmniej ostatnia średnia odczytu i podstawowe dane były dostępne bezpośrednio przez API Web interfejsu urządzenia, w lokalnym LANie
    - ale podobno nie można mieć wszystkiego więc póki co zadowalam się API w chmurze

    Tutaj podziękowania w stronę zespołu LOOKO2, który wykazał się otwartością na moje pytania dotyczące danych z czujnika a nawet dodał do API parametry, których pierwotnie tam nie było.
    Wirtualka została przekazana również do nich, więc być może pojawi się także na stronie projektu.
    Po cichu liczę, że na jej bazie FIBARO może przygotuje kiedyś jakiś plugin, być może ze statystyką danych na wykresach centralki
     
    Jeśli chodzi o samo urządzenie to wygląda następująco:
     

     

     
    Całość tzn. plik wirtualki, ikony, oraz opis parametrów znajdują się w dołączonym zipie.
    Po imporcie urządzenia, należy dodać niezbędne ikony oraz dodać ich ID do configa wirtualki.
    Ponadto należy podać tam ID interesującego nas czujnika - ja nie mam jeszcze własnego więc
    pobieram dane z dostępnego w pobliżu, oraz token - można go uzyskać mailowo od suportu Looko2.
    W celu działania PUSHy oraz dalszego wykorzystania jakości, należy dodać zmienną globalną
    o nazwie określonej w konfiguracji. (W przypadku wielu urządzeń / czujników - dla każdego tworzymy nową zmienną), oraz określić ID urządzeń mobilnych/
    Wszystkie parametry opisane są w dołączonym pliku oraz komentarzach w konfiguracji samego urządzenia.
    Cała konfiguracja znajduje się w pierwszej części kodu urządzenia i nie powinna sprawiać żadnych problemów.

    Czas odświeżania danych z API również można modyfikować w konfiguracji - wstępnie zdefiniowałem go na 15 minut.
    W mojej ocenie jest to zupełnie wystarczające a częstsze odświeżanie danych nie ma sensu, bo prezentowane w API dane
    to średnia ostatnich odczytów - co czyni odczyt bardziej poglądowym niż odczyt chwilowy.
     
    Całość kodu znajduje się w pętli głównej, podczas testowania urządzenia (pewnie około 2 miesiące) zdarzyły mi się sporadyczne
    zawieszenia - może 2 - dlatego nie zdecydowałem się na pakowanie kodu pod przycisk i wyzwalanie go sceną.
     
    W przypadku interfejsu webowego urządzenie prezentuje jakość poprzez ikonę oraz nr indeksu jakości w dolnej belce pod ikoną urządzenia.
    Po wyświetleniu szczegółów, prezentowane są dokładne dane o aktualnej jakości powietrza. Nazwa urządzenia oraz lokalizacja IN / OUT prezentowana w szczegółach urządzenia, pobierana jest z API czujnika,
    natomiast pomieszczenie odzwierciedla umiejscowienie czujnika w strukturze pomieszczeń centralki FIBARO.
    Procentowe zanieczyszczenie wyliczane jest w oparciu o dostępne normy (z wyjątkiem PM1 - tu nie znalazłem danych więc jako normę przyjąłem 20 µg/m3 - oczywiście można to zmienić w konfiguracji)
    Do zmiennej globalnej zapisywana jest informacja o ogólnej jakości powietrza z ustawionego czujnika (0 najlepsza, 1 dobra, itd.) - zakres zgodny z dostępnymi normami i dostępny na stronie czujników

    W przypadku urządzeń mobilnych występują drobne problemy z wyświetlaniem m.in z przejściem do nowej linii - szerzej problem opisałem tutaj:
     
    Ogólnie po wprowadzeniu prawidłowego tokenu, wszystko powinno działać bez większych problemów.
    Bez podania tokenu urządzenie będzie wyświetlało informacje o błędzie z tym związaną.
     

    22 downloads

       (0 reviews)

    0 comments

    Submitted

  19. HTTP MQTT (php) bridge

    mqtt_php.zip

    134 downloads

       (0 reviews)

    0 comments

    Submitted

  20. Yeelight Manager

    VD YEELIGHT MANAGER
    Originally released on domotique-fibaro.fr
    v. 1.3.0 - 14/01/2018
     
    I present the VD Yeelight Manager which, as its name suggests, allows you to integrate Yeelight products with the HC2. To be very precise, I only have a Bedside Lamp and I have not tested this VD with other products. However, since the API is generic, there are no reasons that it does not work too. The only limit, I did not integrate in the DV management of the background light since the Bedside Lamp does not have such a light.
     
    To use it, simply enter the IP of the Yeelight in the IP field of the DV, and the port in the Port field of the DV (the port used by the Yeelights is 55443). You can add or change elements of the virtual device according to your needs (the white light bulb does not need, for example, anything related to color management), as long as the TCP Connection and Transmission buttons keep their respective names (btnTCPConnection and btnTransmission). Yeelight Manager will find them himself by these names.
     
    In order to be able to manage a Yeelight 'almost' like a module, simply insert in the scene or the code of the button or Main Loop the following code:
    _y={credits='Yeelight Controller v. 1.3.0 - Copyright 2018 Olivier Meyer - GNU GPLv3',global='y_yeelight_global',item='y_yeelight_',props={power=true,bright=true,ct=true,rgb=true,hue=true,sat=true,color_mode=true,flowing=true,delayoff=true,flow_params=true,music_on=true,name=true,bg_power=true,bg_flowing=true,bg_flow_params=true,bg_ct=true,bg_lmode=true,bg_bright=true,bg_rgb=true,bg_hue=true,bg_sat=true,nl_br=true},f=fibaro,debug=function(s,m,c)s.f:debug(string.format('<span style="color:%s;">%s</span>', c, m))end,here=function(s)local h=type(s.f.getSelfId)=='nil' if h then return h,__fibaroSceneId else return h,s.f:getSelfId(),_elementID_ end end,log=function(s)local h=s:here()if h then local a=s.f:args()if a then if a[1].yeelight then s:debug(a[1].debug,a[1].color);s:debug(a[1].command,a[1].color);os.exit()end end end end,getBtn=function(s,i,n)local c,r=0,api.get('/devices/'..tostring(i))['properties']['rows'] local x=#r for a=1,x do local y=#r[a].elements for b=1,y do c=c+1 if n==r[a].elements[b].name then return c end end end s:debug('[Yeelight] Unable to locate button '..n..', check virtual device '..i,'Tomato');return nil end,build=function(s,m,p)local c='{"id":1, "method":"'..m..'", "params":['for i=1,#p do if type(p[i])=="number"then c=c..p[i]else c=c..'"'..p[i]..'"'end;if i~=#p then c=c..', 'end end;c=c..']}\r\n'return c end,load=function(s,v)local g=s.f:getGlobalValue(v)if string.len(g or '')>0 then local d=json.decode(g)if d and type(d)=='table'then return d else s:debug('[Yeelight] Unable to process data, check variable','Tomato')end else s:debug('[Yeelight] No data found!','Tomato')end return nil end,set=function(s,i,d)local g=s:load(s.global)if g[tostring(i)]then local a,b,c=s:here();g[tostring(i)].scene=a;g[tostring(i)].id=b;g[tostring(i)].button=c;g[tostring(i)].command=d;s.f:setGlobal(s.global,json.encode(g))end end,call=function(s,i,m,p)local b=s:getBtn(i,'btnTransmission')if b==nil then return nil end;local c=s:build(m,p)s:set(i,c)s.f:call(i,'pressButton',b)end,getValue=function(s,i,p,g)if s:checkP(p) then if type(g)~='table' then g=s:load(s.item..i)end if g.properties then if g.properties[p] then if g.properties[p].value then return g.properties[p].value end end end s:debug('[Yeelight] Unable to get value of '..tostring(p)..', please check variable.','Tomato');end return nil end,getModificationTime=function(s,i,p,g)if s:checkP(p) then if type(g)~='table' then g=s:load(s.item..i)end if g.properties then if g.properties[p] then if g.properties[p].modificationTime then return g.properties[p].modificationTime end end end s:debug('[Yeelight] Unable to get modification time of '..tostring(p)..', please check variable.','Tomato');end return nil end,get=function(s,i,p)local g=s:load(s.item..i);return s:getValue(i,p,g),s:getModificationTime(i,p,g)end,getStatus=function(s,i)local g=s:load(s.item..i)if g then if g.status then return g.status end end return nil end,getLastChange=function(s,i)local g=s:load(s.item..i)if g then if g.last then return g.last end end return nil end,checkP=function(s,p)if not s.props[p] then s:debug('[Yeelight] '..p..' is not an existing property!','Tomato') return false end return true end} _y:log() This code above offers the following functions:
    _y:call(id, method, params) which allows to send a command to the lamp. The various buttons of the VD give examples. To go further, please have a look at the Yeelight API documentation  : Yeelight_Inter-Operation_Spec.pdf _y:get(id, property) which does exactly the same thing as fibaro:get() _y:getValue(id, property) which does exactly the same thing as fibaro:getValue() _y:getModificationTime(id, property) which does exactly the same thing as fibaro:getModificationTime() _y:getStatus(id) which returns "online" if the lamp is connected to the wifi network, and "offline" otherwise _y:getLastChange(id) which returns a table containing the properties that have just been modified and their new value  
    The logs generated by the call () function are displayed in the debug zone of the scene (do not forget the _y: log () line and allow enough instances) or in the button or main loop of the virtual module from which the function was used.
     
    To use these lamps as scene triggers, the VD automatically creates a global variable y_yeelight_XXX, where XXX is the ID of the VD. This global variable contains all the properties of the lamp and is updated in real time.
    For example, to start a scene when a Yeelight is turned on:
    --[[ %% globals y_yeelight_XXX --]] _y={credits='Yeelight Controller v. 1.3.0 - Copyright 2018 Olivier Meyer - GNU GPLv3',global='y_yeelight_global',item='y_yeelight_',props={power=true,bright=true,ct=true,rgb=true,hue=true,sat=true,color_mode=true,flowing=true,delayoff=true,flow_params=true,music_on=true,name=true,bg_power=true,bg_flowing=true,bg_flow_params=true,bg_ct=true,bg_lmode=true,bg_bright=true,bg_rgb=true,bg_hue=true,bg_sat=true,nl_br=true},f=fibaro,debug=function(s,m,c)s.f:debug(string.format('<span style="color:%s;">%s</span>', c, m))end,here=function(s)local h=type(s.f.getSelfId)=='nil' if h then return h,__fibaroSceneId else return h,s.f:getSelfId(),_elementID_ end end,log=function(s)local h=s:here()if h then local a=s.f:args()if a then if a[1].yeelight then s:debug(a[1].debug,a[1].color);s:debug(a[1].command,a[1].color);os.exit()end end end end,getBtn=function(s,i,n)local c,r=0,api.get('/devices/'..tostring(i))['properties']['rows'] local x=#r for a=1,x do local y=#r[a].elements for b=1,y do c=c+1 if n==r[a].elements[b].name then return c end end end s:debug('[Yeelight] Unable to locate button '..n..', check virtual device '..i,'Tomato');return nil end,build=function(s,m,p)local c='{"id":1, "method":"'..m..'", "params":['for i=1,#p do if type(p[i])=="number"then c=c..p[i]else c=c..'"'..p[i]..'"'end;if i~=#p then c=c..', 'end end;c=c..']}\r\n'return c end,load=function(s,v)local g=s.f:getGlobalValue(v)if string.len(g or '')>0 then local d=json.decode(g)if d and type(d)=='table'then return d else s:debug('[Yeelight] Unable to process data, check variable','Tomato')end else s:debug('[Yeelight] No data found!','Tomato')end return nil end,set=function(s,i,d)local g=s:load(s.global)if g[tostring(i)]then local a,b,c=s:here();g[tostring(i)].scene=a;g[tostring(i)].id=b;g[tostring(i)].button=c;g[tostring(i)].command=d;s.f:setGlobal(s.global,json.encode(g))end end,call=function(s,i,m,p)local b=s:getBtn(i,'btnTransmission')if b==nil then return nil end;local c=s:build(m,p)s:set(i,c)s.f:call(i,'pressButton',b)end,getValue=function(s,i,p,g)if s:checkP(p) then if type(g)~='table' then g=s:load(s.item..i)end if g.properties then if g.properties[p] then if g.properties[p].value then return g.properties[p].value end end end s:debug('[Yeelight] Unable to get value of '..tostring(p)..', please check variable.','Tomato');end return nil end,getModificationTime=function(s,i,p,g)if s:checkP(p) then if type(g)~='table' then g=s:load(s.item..i)end if g.properties then if g.properties[p] then if g.properties[p].modificationTime then return g.properties[p].modificationTime end end end s:debug('[Yeelight] Unable to get modification time of '..tostring(p)..', please check variable.','Tomato');end return nil end,get=function(s,i,p)local g=s:load(s.item..i);return s:getValue(i,p,g),s:getModificationTime(i,p,g)end,getStatus=function(s,i)local g=s:load(s.item..i)if g then if g.status then return g.status end end return nil end,getLastChange=function(s,i)local g=s:load(s.item..i)if g then if g.last then return g.last end end return nil end,checkP=function(s,p)if not s.props[p] then s:debug('[Yeelight] '..p..' is not an existing property!','Tomato') return false end return true end} _y:log() local function run() --executed on light on end local trigger = fibaro:getSourceTrigger() if trigger.type == "global" then if trigger.name == "y_yeelight_XXX" then if _y:getLastChange(XXX)["power"] == "on" then run() end end end

    368 downloads

       (0 reviews)

    0 comments

    Updated

  21. Volumio_VD_1.0

    Here's a virtual device I created to control my Volumio Music Player, which is running on a Rasbperry Pi.
    Volumio comes with an own built-in ReST API that I use for the this virtual device.
     
    You must have your Volumio connected to your local area network (the same as Fibaro HC).
    After importing the virtual device, set the IP address and the port (default port 80) to point at your Volumio.
     
    Offical site of Volumio: www.volumio.org
    Volumio ReST API documentation: www.volumio.github.io/docs/API/REST_API.html
     
    Note: Tested on Fibaro HC2 4.180
     
    Enjoy.

    102 downloads

       (0 reviews)

    0 comments

    Updated

  22. Dane ze stacji meteorologicznej UMK

    Urządzenie wirtualne wyświetlające parametry pogodowe pobierane ze stacji meteorologicznej UMK. Najbardziej przyda się osobom z Torunia i okolic
     
    Samo urządzenie wyświetla dane ze zmiennych globalnych, które są przy pomocy api fibaro aktualizowane przy pomocy skryptu php. Wymagane jest wobec tego posiadanie w sieci lokalnej serwera z apachem i php oraz dodanie skryptu do harmonogramu zadań cron dla cyklicznej aktualizacji.
     
    Mam nadzieję, że komuś się przyda. 
     
    Pozdrawiam 
    m4fibaro_umk_meteo_php.zip

    10 downloads

       (0 reviews)

    0 comments

    Updated

  23. piCorePlayer

    Vertual Device to control piCorePlayer on raspberrypi
     

    14 downloads

       (0 reviews)

    0 comments

    Updated

  24. Samsung Air Conditioner

    Since Samsung Plugin doesn't work I decided to write custom Samsung Air Conditioner VD.
     
    Requirements:
    Samsung AC Local PHP server (NAS, RPI, ...)  
    Installation:
    Copy smarthome folder to your php server Edit/rename Bedroom.php, Living room.php files. For each device you need separate file. In each file: enter IP of your AC device enter token of your AC device To get token follow steps 3.1 - 3.5 from this site. Check if your PHP server is working: http://192.168.0.10/smarthome/samsung-ac/Bedroom.php
    Of course change 192.168.0.10 with the IP of your PHP server.
    You should see JSON result with status. Something like this: { "power": "Off", "mode": "Cool", "virusDoctor": "Off", "quiet": "On", "wind": "Fix", "temperature": 22, "currentTemperature": 23, "sleep": 0 } Install Air Conditioner VD Edit Air Conditioner VD:
    Room name must be the same as your PHP file name without .php extension, e.g. Bedroom Enter Address IP of your PHP server, e.g. 192.168.0.10 Port number of your PHP server, usually 80 Add VD icons and enter icons ID at "refresh" button section:
     
    Enjoy...
     

    93 downloads

       (0 reviews)

    0 comments

    Submitted

  25. ZeverSolar Monitor

    Poniżej pierwsza wersja kodu dla Fibaro VD odczytująca dane z falownika  ZeverSolar -instalacji fotowoltaicznej dostępne po sieci lokalnej: adresIP/home.cgi. 
     
    VD ZeverSolar wymaga tylko wpisania swojego adresu IP
    VD ZeverSolar umożliwia:
    1. Prezentacje danych: czas odczytu, wartość chwilowa pacW,  wielkość produkcji dziennej.
    2. Przycisk wymuszający odczyt on demand "Update?".
    3. Zapis zmiennych globalnych pacW, etodayKWh.
     

     

    44 downloads

       (1 review)

    0 comments

    Updated


×
×
  • Create New...