I have one thermostat in Bedroom, and it is included into Bedroom zone climate plan. 

When I set the climate zone to manual mode see the picture

Please login or register to see this attachment.

climate zone set 

Please login or register to see this attachment.

he device, is not changing its setpoint when the plan changes,

Anyone any advice?

Please login or register to see this image.

Rebooting the HC3 is the only option I have... When rebooted I can see that sometimes the delete(s) or save(s) have been done.

Looking at the time stamps in the history file I can deduce that the saving of a scene took 15 up till 45 minutes.

Something is going wrong here.

Please login or register to see this code.

Nie pomaga odczytanie konfiguracji ani klikanie w przyciski.
Nie robiłem żadnych zmian w instalacji, która działała przez ponad rok.

Czy to oznacza że od tej wersji straciliśmy obsługę S2 i muszę przejść na double switch czy to błąd w sztuce i można liczyć na fixa w kolejnej wersji?

Past several days I have lost connection to my HC3.

Getting email about:

Your Home Center device HomeControl3 (HC3-000xxxxx) lost connection to Fibaro Cloud.

The device was turned off, there was no Internet connection or a different problem occured (e.g. power outage). While your Home Center is not connected to Cloud, you will not receive push and email notifications. Scenes based on geolocation will not work and remote access will be disabled.

Lights on, nobody home. App do not work. Remove power and then it reconnects without problems

Can I assume that is why this update have been removed from the servers?

If this is not releated I need to contact support I guess

Running 5.130.45

// Michael

The graf there is a good tool.

Today I discovered that the graf no longer has space enough but continues out of the screen to the right not showing the latest measures.

I dont know when this has happened, I have not used it regularly during the summer, but something es wrong in day, month, year.

By the way, I would very much like a graf for humidity and light. Would be great !

Icons are displayed sequentially, so it take time to fully show all of them... especially on big 4K screens.

On previous versions, the icons were displays simultaneously, so it was much faster.

Could you please reverse back to the old way of displaying icons, or let the user choose by creating a new option switch in the parameters screen ?

Tested using Firefox and Chrome.

Also, when user wants to change icon in the general tab of each device, the icons are very small... not very convenient.

Danalock has last FW.
Does anyone have a similar problem?

Also all locations of the Z-Wave devices, are on the same location, as with the previous HCL.

All devices are Z-Wave Plus, for the Europe Region Frequency.

Currently there are only 9 Z-wave Devices included.

6 off them are Fibaro Z-Wave devices

All are with power supply. I've removed all Z-Wave battery Devices.

With HCL I've had no Issues with the Zwave Range. With Homecenter 3, I'm using the Zwave 3 Engine.

Now Z-Wave devices farther away from HCL3, lose connection to the HC3, all the time.

Nearer devices occasionally.

I've added an Aeotec 7 Z-Wave Repeater and placed it on various locations on the premises, to help the Z-Wave range. The Repeater is correctly included to the HC3, but it doesn't do any Mesh connections.

It seems the HC3 doesn't use Z-Wave Mesh at all.

If I run the Z-Wave Info LUA Scene, it does'nt show any Mesh Hops.

Please login or register to see this link.

According to the specs, the Fibaro Homecenter 3, should have a much larger Z-Wave range, than a Homecenter Light.

In my case, the Homecenter 3, has less Zwave range, than a Homecenter Light with

Z-Wave Mesh devices.

There were no improvements for the Z-Wave Range, trough all the Fibaro Firmware updates Beta and stable Releases, until now with Firmware 5.130.45

This is a very disappointing Performance, for such an expensive Device.

Any Help is very much appropriated

Fabir

Found a bug - when deleting a room with roller shutter on it ( in my case - Walli ) - device start re-calibrate itself and move rolls up-down-up.

When it happened at night - it's very surprising, I must say

Using last version 5.130, ZW 2.0 engine

? 

And now some internal notes block.
Personally, I make an empty LUA scene as the first scene and write notes about the given installation here... but it doesn't hurt to have it separately. An ordinary text will not take up any space even if a person writes a novel.

if i do so in 5.130.45 the HC3 run into an error and dosen‘t work. I have to restart the HC3.

Update 5.130 has been temporarily removed from the server. We will notify you once it is available again.

We are very sorry for the inconvenience.

At first start update is done to 130

Try to set static IP

Green pop up comes up: Successful 

Go anywhere in the menu, then come back to network no static IP. The roll down is says: Choice (not static)

The solution was: roll back to original firmware, set static IP, then update and it is working.

Anyone with the same problem? This was 3 hours to get the solution.

Main features:
    
1. Redesigned the way user access settings works

From now on, it is possible to grant access to devices and scenes by entire sections or rooms in the system.
Access to newly added devices and scenes will be automatically granted if an entire section or room is selected.
New user will automatically have access to the entire system from the beginning.
    
2. Scenes can be assigned to rooms

From now on, all types of scenes can be assigned to rooms, not just categories. 
    
3. Z-Wave devices exclusion wizard

Z-Wave exclusion is now available in new wizard style.
Additionally there is an option to start exclusion directly from failed inclusion process.
    
    
What's new:

Devices
    Added Gateway filter to devices list.
    Added possibility to filter out power metering devices from mobile application energy panel.
    Changed UI for icons selection.
    Heatit ZM Single Relay 16A support.
    Heatit ZM Thermostat 16A support.
    Heatit Z-Push Wall Controller support.
    Heatit Leakage Stopper support.

Network
    Automatic selection of network connection type in FTI if only one is available.

Nice*
    Optimized support for OXIBD module. 

Other
    Optimized trim of events database. 
    Performance improvements.
    Added system notification about potential performance loss due overheating.   
    Added possibility to clear all system notifications at once.     

Profiles
    Changed UI for icons selection. 

Quick Apps
    Power sensor device type added to QuickApps.
    Removed password saving option in browser for secret variables.

Rooms
    Changed UI for icons selection. 

Scenes
    Added validation for time inputs in block scenes.
    Devices used in scenarios and hidden later are now shown on the devices list.
    Scenes name limit is changed to 60 characters.
    Changed UI for icons selection. 

Update
    Translations support for devices Update Service.**
    Devices update now available using remote access.

Z-Wave
    Performance improvements.**

Bug fixes:

Alarm
    Some alarm scenes are not listed in Alarm tab.

Climate Panel
    Some devices set to "Hold" in manual mode returns to schedule anyway after 7 days.
    Climate zone deactivation does not work for some device types. 

Dashboard
    Favorite position label defined by user is not used on dashboard tiles and sidebar. 
    Alarm status "dots" on sensors tiles does not change color according to current zone state. 
    Scrolling long names does not always show the full text on device tiles. 

Devices
    Issue with displaying current values of bit-mask type configuration parameters.
    Cannot navigate to child device using "parent-child" tree when filters are enabled.
    Newly added device is not visible when filters are set.
    After adding a camera, modal for adding "other devices" stays open. 
    Wrong battery status for Sensative strip Guard 700 in some cases.
    Binary sensor cannot be used for Video Gate linked device. 
    Missing possibility to sort devices using battery level.
    Minor fixes in UX for new devices filters.
    Missing support for some actions related with color control (fading, enhancing, stop color change).
    HeatIt ZM Thermostat 16A set-point issue requires reconfiguration to work properly (introduced in 5.121.28 beta).

Elero*
    Devices are marked as dead during binding procedure in rare cases. 

Gateway Connection
    Incorrect role handling for FIBARO RGBW 1.
    Missing possibility to exclude device from slave gateway. 

Nice*
    Redundant "Stop" button for gates on control dialog in mobile application.
    Removed redundant step in "pairing a remote in gateway" binding process. 

Other
    Fixed Recovery UI issues in German language.
    Wrong display of "not used" RAM value in diagnostics. 
    Not saved system language during FTI in some cases. 
    Notifications creation time is calculated according to browser time, not system one.
    Mismatched translations when leaving Recovery mode.
    Some cases encountered system booting issue after update (introduced in 5.121.28 beta).
    Incorrect notification about HC3 gateway overheating (introduced in 5.121.28 beta).
    Newly added devices access issues for mobile app and web interface users (introduced in 5.121.28 beta).

Quick Apps
    Missing logs in console after page refresh.
    Quick App sprinkler device type is not supported in Garden Panel. 
    QuickApps content loading issue while using the remote connection (introduced in 5.121.28 beta).

Scenes
    Unnecessary popup with "unsaved changes" in some cases for Scenarios. 

Update
    Impossible to start second update for battery-operated device.**
    Last target in devices update stays in "In Progress" status even if whole process ended.**

Z-Wave
    Engine crash in some cases during multiple network management operations.**

Known issues:

Z-Wave Engine 3.0
    Some Z-Wave devices are not fully compatible with the new version of Z-Wave engine.
    Gateway connection is not available in the new Z-Wave engine version.

*  - does not apply to HC3L (Home Center 3 Lite)
** - applies only to Z-Wave Engine 3.0