Will it become the reference temperature sensor in the respective climate pannel and all thermostatic heads (FIBARO, Danfoss, Popp etc) will adjust accordingly until the climate zone set set temperature will match the one measured by the respective temperature sensor ?

If yes, please provide some details about the coding behing that: what is the variation from setpoint when the thermostatic heads will start to adjust, overshoot delta and so on.

thank you !

After i upgraded to 5.131.57 (beta) I receive the message below a coupe of times. I did not move my HC3

Possible performance decrease due to overheating

Make sure that the hub is in a place with adequate ventilation and is not on top of other devices that are sources of heat. Due to the excessive heating, the performance of the device was temporarily decreased.

Did anyone else got this message or should i just try to move the HC3  (everything looks normal in the Diagnostics section)

Br Martin

Crashing in this cash means it doesn't work anymore and it doesn't automatically reboot. Consequence is that Home Automation is gone. The events show nothing, the leds on the front stay as normal with the exception of the internet led (2nd from right) which is red (no internet), Of corse there's internet. 

What are my options to find the root cause of this crashing? Next to the HC3 software, it could also be a crappy QA, halve dead sensor, etc.

First picture is saving 60 minutes for first time. second you go and edit, time is still saved. But third time, time resets to 0.

I'll try the scenarios for next days and keep this updated.

// EDIT : today just worked well at the time programmed, maybe it was just small problem

Please login or register to see this attachment.

There is just a stady blue ligth in the house icon on the front of the HC3. After some time, hours? (just left it..) it will be steady amber ligths in all leds excpet for the alarm led that is blinking, from there I am able to do a recovery reboot and switch system image.

Is there a known bug causing this? Device or QA?

Nice zibgee support off lamp but no uppdate of the ikea ikea led power supply

This is happening with all my connected AC's and right after the update. Ive removed and re-added the Remotec and adjusted all the parameters as before and restarted My HC3 many times, but still with no success.

Can anyone help?

"Dashboard:
    Possibility to add devices from the dashboard"

The best feature HC2 / HCL have, are the Comparison Panel Graphs for Temperature- and Power-Sensors

Comparison Panel Graphs for Temperature- Power-Sensors and others are still missing right now.

What is the hold-back?

Take a look at the pic, the last time I can check its aprox 9:30, now its 18:00 and it does not appear in the chart, and the line is "cut" when it reaches the right end of the screen. It does not let me go on to the next hour or day.

The device is fibaro smoke sensor, but it happens the same with some fibaro door sensors that I have (with temperature sensor incorporated)

Please login or register to see this attachment.

in the next weeks I will install a diy battery system for my Solar energy production system. I want to add smart meters on the Battery to monitor the charging and discharging of the Battery. 

Is it planned for the future to include something like this to the energy panel in Homecenter and app? 😁

Regards

Marcel 

PS. 
I'm still hoping for tradfri remote control support from ikea. Without it, no one will add their lighting.

+
Maybe in the app (settings) you would give some info (not the whole update process) that there is a new version available on the hub?

Important Notice:

In some random cases, the HC3 upgrade may not succeed.
In such cases, the gateway will automatically revert to the previous system version. 

Main features:
    
1. New way of controlling devices from the Dashboard sidebar

    Completely redesigned control of color controllers.
    Support of color temperature setting for the Zigbee devices.

    *The Zigbee devices controlling the light should be re-added to the system.
    
2. New predefined scenarios designed to control lights based on time conditions and gates status
    
    
What's new:

Climate
    Added possibility to assign temperature sensors for climate zones.

Dashboard
    Possibility to add devices from the dashboard.
    Added battery level indicators on devices tiles. 

Devices
    Optimised procedure for adding devices for all protocols.
    Improved UI/UX and performance for device page filters.
    Added filters clearing mechanism when leaving the page.
    Added the description field for every device type.
    Redesigned family of devices view.

Energy
    Modified page layout for energy meters configuration in panel settings.

Gateway connection
    Added an option to define Slave IP address manually. 
    Added additional redundancies for unexpected changes in network configuration.

Nice*
    Improved support for OXIBD status updates.
    Added generic support for legacy Bidirectional shutters.
    Improved support for device specific notifications. 

Other
    Improved algorithm for gateway overheating notifications.
    Minor UI/UX improvements.

Plugins
    Added support for pulling the latch for the Tedee door lock.
    Improvements for Heat Activator plugin.

Quick Apps
    Added support for the Base Shutter device type.

Scenes
    Added the filters for Scenes page.
    Added "tolerance" option for Energy Panel block scenes.
    Improved blocks content loading performance for large systems.
    Added the description field for every scene type.
    Changed the order of steps for Scenarios.

Update
    Added possibility to update all devices.
    Added additional warning before upgrading to the beta version of the hub.

Zigbee
    Improved generic support for lights and color controllers.

Z-Wave
    Added handling of suspended device interview during the adding procedure for battery-powered devices.**
    Support for different revisions of the Aeotec Multisensor 6.
    Support for the ZW800 series MCO IR2900 thermostat.
    Support for the Everspring SP103.**

Bug fixes:

Climate
    The zone control freezes if the last setpoint is set at 5:00am.

Devices
    Issues with the display of some configuration parameters values.

Elero*
    The RolSolar device is incorrectly marked as disconnected.
    Using favorite positions in group actions does not work.

Energy
    Energy charts are malformed occasionally.
    Negative energy consumption data in the panel after clearing the energy data in some cases. 
    Negative power consumption values for "Grid consumption" setting in some cases.  

FTI
    No masking of Wi-Fi password during the first configuration on Firefox.

Gateway Connection
    Connection issues in specific network configurations. 

Nice*
    Losing possibility to control devices in some cases.
    Fixed issue with binding some mono-directional devices.
    Custom icons for mono-directional devices not visible.

Other
    Added possibility to enable remote access for support from recovery system.
    Standard user cannot remove interactive push.
    Issues with controlling the linked-device thermostat in some configurations.
    System crash while deleting a non-existing notification.
    Wrong time in history after the change from winter time to summer time.
    Adding more than one Other device by clicking the add button excessively.
    The state of devices is not refreshed when pressed run scene button without refreshing the page.
    Other UI/UX fixes.

Plugins
    Lack of live preview for Helios 2N plugin.

Profiles
    Incorrect display of climate panel settings.
    Incorrect display of sliders in profiles settings.

Quick Apps
    Secret variable value visible in the webUI after saving.

Scenes
    Elero RolMotion blind is controlled even if excluded from a simple scenario.
    Incorrect display of sliders in block scenes.
    Cannot edit Scenarios via mobile app in remote connection.

Zigbee
    Wrong time unit during the adding process.

Z-Wave
    No possibility to update Z-Wave devices added in Security mode.
    Lack of handling unsolicited reports from devices using CC Basic.**
    Issues with updating devices from file in some cases.**
    Incorrect default role for the Zooz ZAC36 valve.
    Improved adding procedure when using S2U security level.**
    The exclusion process cannot be closed after an error has occurred.

Known issues:

Z-Wave Engine 3.0
    Some Z-Wave devices are not fully compatible with the new version of Z-Wave engine.
    Gateway connection is not available in the new Z-Wave engine version.

*  - does not apply to HC3L (Home Center 3 Lite)
** - applies only to Z-Wave Engine 3.0