Please login or register to see this attachment.

I tried to create a new scenario from scratch, but the results are the same - Save button is disabled preventing any configuration for the newly created scenario.

I regularly need to update the start hour of the scenario and now I am unable to do that, please assist.

The binary switch portion works, and user/RfID codes can be programmed in 5.180, but the profile change ability has disappeared, and the lock does not change the UI from unlocked to locked.

Is this one of the legacy devices that might be added back in in a future update, or has this device reached it's end?

Please login or register to see this attachment.

Please login or register to see this attachment.

Not 100% sure it is related to the latest update, but it was working before. 

My sprinkler scheme does not activate the linked device (i.e. the watering valve) at the end of the sprinkling period, it does close it. In the log below, you can see what I mean.

Also adding sprinkler schedule, device config and selection. 

Anyone else seeing this?

Thanks. Jeroen 

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.

For several weeks now, older scenes have consistently not been executed automatically. However, the process was interrupted several times when uploading the backup. Since then, I can no longer access the system - neither via the IP address nor via the Fibaro Finder Tool.

I have tried to restore the backup via recovery mode, but the restore fails there too.

Details:

• Home Center 3
• Firmware version before error 5.180.17

Current status:

• No access via web interface
• Backup upload fails
• Recovery mode is accessible, but backup cannot be loaded there either

Error message:

• Error while writing Z-Wave dump file 

I would be very grateful for your help. 

Many thanks in advance
Jonas

Since the last update, I've noticed a display bug in the LUA editor (see screenshot). When I scroll through a scene, a piece of code from the beginning of the scene appears at the top of the page. I've tried this with several browsers (Chrome, Safari) and on multiple machines.

Am I the only one experiencing this?

Please login or register to see this attachment.

The preview (attached) shows a "255%" battery level .... hm, pretty weird. Any ideas?

Please login or register to see this attachment.

    "icon": {
      "path": "/plugins/com.fibaro......",
      "source": "HC"
    }

Through LUA I am not able to change the icon of this device through updateProperty("deviceIcon", 1234) command which I am able to do on other devices.

Is there a way around this issue or anyone has any input?

Since I updated with the new firmware 5.180.17, my HC3 receives these messages:

Please login or register to see this attachment.

Never had anything before.

What can I check / do?

I also opened a ticket to support but no one answers me.

Thanks.

Fabrizio

What's new:

Dashboard

    Added visual feedback for devices with power metering on the device tiles.

Devices

    Performance improvements in binding processes from the mobile application.

    Heatit Z-Water2 device support added.

    Heatit Z-TRM6 DC device support added.

    Updated device dialog for Sound Switch device type.

    Added a hourglass icon for scheduled actions for HVAC devices.

    Improved handling of HVAC devices using Fahrenheit scale for temperature control.

    HeatIt Z-Temp3 support added.

    Fantem Home Energy Meter Gen 8 support added.

    Aeotec Home Energy Meter Gen5 2P (US region) support added.

    Added a possibility to change HVAC devices icons.

Elero

   Added support for legacy Combio JA Pulse device.

   Added support for Awning device role for various motor types.

Gateway Connection

    Possibility to connect hubs from different networks based on provided IP.

Nice*

    Updated chip SDK for stability and performance improvements.

    Optimized network configuration for better performance.

    Domi WSC parameters template updated. 

Other

    Updated definitions for binding instructions for the Yubii Home app.

    Implemented automatic restart of services in case of backup restoration failure and other errors.

    System boot-up procedure performance improvements.

Quick Apps

    Improved loading time for content provided in the webview.

    Removed success toasts for webview content which covered the content of the Quick App.

    The exported QuickApp file now contains a device description.

    Added automatic code completion for RefreshStateSubscriber function.

Plugins

    Added support for Satel Integra 256 in old FW revision.

Scenes

    Function hub.setTimeout now returns a timeout ID that can be used to clear an ongoing timeout using the hub.clearTimeout.

    Default behavior for predefined scenario changed - from now no devices are selected by default.

Z-Wave

    Various legacy devices support added to Z-Wave 3.0 engine.**

    Reconfiguration of the device now keeps original name of the devices entities.**

    Z-Wave radio module SDK updated for Yubii Home and Home Center 3 Light.

Zigbee

    Introduced the mechanism which prevents losing the network configuration in very rare cases.

    MOES Human Presence Sensor ZSS-QY-HP (and other revisions) support added.

Bug Fixes:

Access

    The advanced user can't remove user's mobile device in Access settings even if right Access is granted.

    The installer can't upload a backup into the system.

    Small UI fixes in whole system for the advanced user depending on specific access rights. 

    Installer does not see system notifications for administrator.

Backup

    Error while uploading a Cloud backup in rare cases.

Cameras

    Lack of local preview for some cameras in Safari browser.

Dashboard

    Fixed issues with displaying large values on device tiles for sensors.

    Lack of state label for binary switches without power metering.

Devices

    Fixed http error 404 when opening thermostat control dialog after deleting climate zone.

    The header in device protocol-specific notifications is incorrect.

    Fixed refreshing advanced parameter values when using mobile app device binding process.

    Inversion settings, device role and favorite positions are not restored in some cases after performing a soft-reconfiguration.

    Fixed an issue with setting the wake-up interval for battery devices to 0 in some cases after saving the configuration.

    Custom door lock icons are not displayed.

    LinkedDevice (binarySensor) does not update the last breach time.

    Custom icons do not work for CO Detector device type.

    Lack of correct icons for Silent Open and Silent Close actions on the control dialog.

    Thermostat Linked Device - fixed the issue when cooling and heating actor is the same device.

    Qubino Flush Dimmer 0-10V - fixed optional temperature sensor handling.

    Restored old sets of icons for some device types. 

Elero

    UI fixes to the device binding process.

Energy Panel

    Billing periods comparsion - incorrect trend arrow status in UI.

    Error during saving Energy Panel settings in some cases.

Garden

    Inconsistent behavior when saving settings for watering time when editing sequences.

Gateway Connection

    Issue with Force Removing of the Z-Wave device from the Slave hub.**

    Issue with listing slaves list in large IP network.

    Restoring a backup after replacing a slave with new unit fixed.

    Stability improvements.

History

    Missing thermostat set-point name in history entities.

Nice*

    Rain detector state not always shows correct status for a Climatic Sensor.

    Fixed binding procedure from the mobile app for BiDi-Multisensor.

    Corrected parameters template for TT2NBD.

Other

    Fixed an issue with some translations refreshing on the fly when changing the Hub language.

    The e-mail notification from device added to Slave hub shows wrong device ID in the content.

    Changing home location using https does not work correctly in some cases.

    Minor UI/UX fixes.

Plugins

    Fixed camera preview issue for the Nice Cameras plugin after changing the encoding from h265 to another one.

    Missing IP field configuration in Philips Hue.

    Fixed issue with Nice Cameras support in scenes when passwords with special signs are used.  

Quick Apps

    Fixed an issue with cutting out dropdown content in new device control dialogs.

    Dropdowns does not work correctly when new view is disabled for mobile application.

    Function setColorComponent doesn't refresh the view when custom color components are used.

    Template for Color Controller device type updated.

Recovery

    UI fixes in the recovery interface on Linux based systems.

Scenes

    Issues with saving scenes content via http API when content contains spaces.

    When adding a simple scenario via the Yubii Home App in installer mode, the description field is covered by the system keyboard.

    In some cases, in block scenes it is not possible to use push notifications for a specific mobile device.

    UI fixes in the Yubii Home scenario creator.

    It is not possible to use negative values in Energy Panel balance blocks.

    Fixed setting slats position for FGR-224/Rol-Control2 group in block scenes.

    Fixed issue in Custom Scenarios when FGKF-601 is used as a trigger.

Z-Wave

    Removed not supported "Reconfigure" option for all Z-Wave devices in Z-Wave settings.**

    Fixed issues with mesh network reconfiguration.

Known issues:

Z-Wave Engine 3.0

    Some Z-Wave devices are not fully compatible with the new version of Z-Wave engine.

* - Does not apply to HC3L (Home Center 3 Lite).
** - Applies only to Z-Wave 3.0 engine.