Update 5.202 BETA Latest Topics

Geofence Still Non‑Functional

Tue, 10 Mar 2026 00:27:09 +0000

Geofencing on HC3 has been broken for several months.

This feature is essential for daily automation, and many users have repeatedly reported the same issue across multiple firmware versions.

We need a clear and transparent update: Is Geofence being actively worked on, and when can we expect a reliable fix?

Some devices doesnt work as expected after Z-wave engine update

Mon, 16 Mar 2026 08:48:17 +0000

I have 3 Greenwave 6 ports that doesnt send any power consumptions of connected units.

I tried to do a Reconfiguration on one of them and then it only registers as one binary switch...

I also have a Pop Keypad which works great before but also stopped working after upgrade.

When i try to reconfigure it, it seems to work (Adding successful) but i can synchronize the users pins anymore.

Before upgrade i could always set different pins/codes and then sync with the HC3.

If i use a block scene now, i get to the part where i can choose the keypad, but when chosing the "==" option to point to which user it should match, there is no option (Probably because i couldnt sync the keypad with HC3).

Anyone else that has these devices and has issues?

Migration error. Check if it is possible to create a backup on the hub and try to restart the migration process.

Sun, 22 Mar 2026 06:20:41 +0000

I tried to migrate to zwave Engine 3.0 but i received the following error message:

Migration error. Check if it is possible to create a backup on the hub and try to restart the migration process.

As suggested selected this time the option to create a local backup but the same error.

What could be the problem?

Thank you

Zwave Performance

Sun, 08 Mar 2026 18:48:20 +0000

Hi,

Completed the migration form Zwave 2.0 to Zwave 3.0.

In my case is night and day change. Now network is super fast. Didn't really expect this....

With 2.0 I always have in my network, with 35 devices, a lot of failed communication, around 5/10 %, with 3.0 is 0 % since the update....

Fantastic

Update to 5.202.54

Wed, 11 Mar 2026 12:11:14 +0000

After having issues with starting services when updating to 5.201.18 now the update 5.202.54 went smooth.

No issues sofar.

Migration error Zwave 3

Sun, 12 Apr 2026 08:47:08 +0000

Hi, today I tried to set up a Z-Wave 3 network, but every time I create a backup, the system tells me to create a backup and try again. Any advice on how to get past this?

Please login or register to see this image.

/monthly_2026_04/image.png.fef4d18dbb1b2d0c87fa51fda468f11d.png" />

Inconsistent Climate between HC3 and Yobii Home app

Sat, 11 Apr 2026 07:37:59 +0000

Hi,

I found an inconsistent termperature zone reporting between Yubii app and HC3 console. The heat valve however are working correctly following HC3 dashboard.

Here what I found.

For ester holiday I set profile to Away. This profile set the climate zone to OFF.

Please login or register to see this attachment.

In the HC3 all is report correctly and the valve are set to OFF

Please login or register to see this attachment.

The inconsistent behavior is on Yubii APP where climate is a mess.

Please login or register to see this attachment.

Not a big deal since valve are working correcly but it need to be fixed anyway

Raffaele

It's that time now

Thu, 19 Mar 2026 21:23:57 +0000

Time to say thank you to HC3 – and I switched to Home Assistance. HC3 only started working for me as a receiver. The amount of integration I can do with Home Assistance compared to what I've believed in for over eight years is a bit excessive. In my opinion, it's a dying system, light years ahead of others. Thanks to everyone for the good suggestions on switching to something that makes more sense these days. I won't regret Fibaro.

Fibaro smart implant error

Sun, 22 Mar 2026 20:51:53 +0000

Device still work, but have notice with error. Migrated on z-wave 3 and device reconfigured last week. Error created after 1 week.

Please login or register to see this image.

/monthly_2026_03/image.png.9e1d638417c70b27f8b43c585a6cb599.png" />

Anybody have same problem?

Templates not working properly after the Z-Wave engine update

Tue, 17 Mar 2026 13:28:34 +0000

QUBINO 3-PHASE SMART METER - stopped working after the update.
I went to check the settings and noticed that it had stopped displaying some configuration options.
Parameters 42 and 43, which control the refresh rate, have disappeared from the settings, but they are still present in the template.
The options to manually add or modify the parameters have also disappeared.

Please login or register to see this attachment.

Z-wave engine update

Sun, 15 Mar 2026 11:54:38 +0000

After update i do not have the "Soft reconfiguration" or "mesh reconfiguration" for Z-wave devices buttons anymore.

Are those supposed to be removed?

Z2-Z3 Migration bug

Sat, 07 Mar 2026 08:57:17 +0000

Some major bugs found

1. Thermostat heads (Fibaro) doesn't follow the climate schedule panel setpoints. / i didnt test with other thermostats yet

2. Fibaro radiator head's "heatRequired" never changes, so we can not drive heatpumps according to this property value.

note: both were working flawlessly in engine 2. We have it in many many installations..

FIBARO System Update 5.202.54 Hotfix for Home Center 3 / Yubii Home Pro

Wed, 11 Mar 2026 11:34:27 +0000

Thank you for using our gateway! Be sure to update to the latest version to enjoy new features and improvements.

Important notice:

Version 5.202.54 is a hotfix for version 5.202.51.

The update resolves:

Fixed problem of the system hanging on Starting Services in rare cases when Thermostat Linked Device is used.
Fixed problem that migration may fail when device model does not contain information about security level when devices were added in legacy versions.

Main features:

Migration of Z-Wave engine from 2.0 to 3.0 version (BETA)

In this version of the software, it is possible to migrate the Z-Wave engine to version 3.0. Migration will allow you to take advantage of all the features of the new Z-Wave engine, including using Smart Start, better generic support for Z-Wave Plus devices and the availability of Security S2, which can be considered the first fully secure communication method for the Smart Home.

Smart Start

From now on, you can use the Smart Start function using QR Scanner in Yubii App. This function will allow you to add devices to the system even faster using binding process.***

What's new:

Devices

Added thermostatOperatingState interface for Linked thermostats.
Added direct access to KNX communication (both sending and recieving packets) from the API.

Gateway connection

Enabling Support Access and Remote Access on the Master hub also enables access on slave hubs.

Nice*

Added the option to disable the sun impact (setting the value to 0 lux in parameter 10) for the Domi WSC device v3.9.0.
The default values of parameters 1, 3, and 10 have been changed for all versions of DOMI WSC devices.

Other

Verification of the checksum when downloading the update file at the beginning of the process instead of at the end.

Bug Fixes:

Climate

Fixed an issue where an added temperature sensor was removed from the climate panel when editing other settings in that panel.
Fixes an error occurs after deleting a device in the climate schedule.

Devices

Fixed a problem with KNX device configuration caused by the lack of support for diacritical marks in device names.
Fixed an issue with function settings for Z-Wave devices with an empty template during the binding process in the mobile application.
Fixed incorrect KNX Bridge connection status after IP change.
Restored missing temperature graphs on FGT device version 4.10.
Fixed the appearance of the dialog in the user interface for BiDi-Awning and AV Controller.

Elero

Fixed color component values for the Elero Lighting RGBW device.
Fixed the appearance and behavior of the Elero Lighting RGBW device icon in the user interface.
Fixed invalid settings for temperature color in profiles for the Elero Lighting RGBW device.

Gateway connection

Fixed errors and incorrect display of options in association settings.
Fixed IP address validation in the Gateway Connection tab.

Nice*

Fixed keep-alive support for Domi WSR/WS device, which caused the device to be shown as disconnected in the system.

Other

Fixed handling of events from the NICE camera plugin when devices are added via NVR.
Fixed icons for Sonos and XBMC plugins.
Fixed errors displayed in the Z-wave tab of the Master hub when using the interface via Remote Access.
Fixed the input validator for variables.
Fixed non-functioning group actions in profiles.

Quick Apps

Added support for climate zone control functions in QuickApps.
Fixed restarting the Quick App process when editing it.
Fixed Heat Activator which stopped working in rare cases.
Fixed an issue with saving the Quick Apps view to a file when encrypting (applies to QA exported from version 5.191 or later).

Scenes

Fixed refreshing of the scene activity switch in the interface when calling activation/deactivation action from the scene level.
Fixed inactive color temperature slider for device Elero Lighting TW in scenarios created in the mobile app.

Known issues:

Z-Wave Engine 2.0 to 3.0 migation

Device updates from both the server and the file are not working, reconfiguration of the device resolves the issue.

* - Does not apply to HC3L (Home Center 3 Lite).
** - Applies only to Z-Wave 3.0 engine.
*** - Fully supported in the upcoming Yubii v2.5.3 application

HC3 stuck on "Starting services" after upgrade to 5.202.

Fri, 06 Mar 2026 07:59:21 +0000

As in the title.

Please advise how to restore HC3 to live.

5.202 BETA

Thu, 05 Mar 2026 12:37:10 +0000

Can we get some info about this part

Added support for climate zone control functions in QuickApps.

What does that mean? Does this refers to some editor's intelisense improvements???

Update https://changelog.yubii.cloud/

Thu, 05 Mar 2026 17:27:28 +0000

Don’t forget to update the

Please login or register to see this link.

overview.

KNX Custom Commands

Wed, 04 Mar 2026 11:54:47 +0000

To extend the functionality of KNX integration, we added the ability to send custom commands to KNX network, and to register your own listener to handle reports from the devices. This allows you to control devices that may not be fully supported by the default KNX integration, or to implement specific behaviors that are unique to your setup. The easiest way to handle this is to do it with a QuickApp. Be aware that this functionality is at a testing stage. It may not be fully stable yet, and also the API may change in the future.

Sending Custom Commands

You can send custom commands to the KNX network by calling the sendCommand action on the KNX integration device (ID 9). This action takes three parameters:

The group address to which you want to send the command (e.g. "0/2/0").
DPT of the value you want to send (e.g. "5.001" for DPT_Scaling).
The value you want to send. The encoding depends on the DPT you are using.

A few simple examples of how to send different DPTs:

-- DPT 1.001 (DPT_Switch):

function QuickApp:turnOn()

hub.call(9, "sendCommand", "0/2/0", "\"1.001\"", true)

self:debug("binary switch turned on")

self:updateProperty("value", true)

end

function QuickApp:turnOff()

hub.call(9, "sendCommand", "0/2/0", "\"1.001\"", false)

self:debug("binary switch turned off")

self:updateProperty("value", false)

end

-- DPT 5.001 (DPT_Scaling):

-- Representation of open/close mapping to percentage may differ based on the device you're integrating.

function QuickApp:open()

hub.call(9, "sendCommand", "0/2/0", "\"5.001\"", 0)

self:debug("roller shutter opened")

self:updateProperty("value", 99)

end

function QuickApp:close()

hub.call(9, "sendCommand", "0/2/0", "\"5.001\"", 100)

self:debug("roller shutter closed")

self:updateProperty("value", 0)

end

-- 232.600 (Colour_RGB)

function QuickApp:setPresetColor()

local r = 0

local g = 74

local b = 147

local payload = {r, g, b}

hub.call(9, "sendCommand", "2/0/16", "232.600", payload)

self:updateProperty("colorComponents", {red=r, green=g, blue=b})

end

Since we're using device actions to send KNX commands, you can send them in whatever way you want. You can use QuickApps, but you can also use scenes, or direct REST API calls (POST /api/devices/9/action/sendCommand).

Listener registration

By registering a listener, you can receive updates from the group address and handle them in your QuickApp. This is useful for monitoring device states or reacting to specific events. For now there is no way to register to a specific group address, so you will receive all updates from the KNX network. You can then filter them in your code to react only to the relevant ones.

A callback can be registered by calling the registerListener action on the KNX integration device (ID 9). This action takes one argument:

The callback URL (an action in your QuickApp) that will be called when there is an update from the KNX network. The URL should be in the format /api/devices//action/{callback name} e.g. /api/devices/123/action/myCallback.

The provided callback will be called with the group address and the value of the update whenever there is an update from the KNX network. Here is an example of how to handle this in a QuickApp:

function QuickApp:onInit()

-- Register a listener for KNX updates.

-- ID 9 is a device that represents the KNX integration. Don't change it.

-- "registerListener" is the action to register a listener. Don't change it.

-- 3rd parameter is the callback URL (an action), that will be called when there is an update from the KNX network. You can choose any action you want, just make sure to handle it in your QuickApp. In

this example we will call "myCallback" action.

local callbackURL= "/api/devices/" .. tostring(self.id) .. "/action/myCallback"

self:debug("Register KNX callback:", callbackURL)

hub.call(9, "registerListener", callbackURL)

self:debug("KNX QA started")

end

-- Callback function to handle KNX updates. The address and value parameters will contain the group address and the value of the update.

function QuickApp:myCallback(address, value)

self:debug("address:", address, "value:", json.encode(value))

end

Debugging

You can change the log level of the KNX integration to "debug" or "trace" in order to see more information about the KNX communication itself and about the communication exchanged between the KNX integration and your QuickApp. To do so, just go to the KNX settings in the web interface, and change the system log level in the network communication section.

FIBARO System Update 5.202 Beta for Home Center 3/Yubii Home Pro

Thu, 26 Feb 2026 14:45:01 +0000

Thank you for using our gateway! Be sure to update to the latest version to enjoy new features and improvements.

Main features:

Migration of Z-Wave engine from 2.0 to 3.0 version (BETA)

Smart Start

From now on, you can use the Smart Start function using QR Scanner in Yubii App. This function will allow you to add devices to the system even faster using binding process.***

What's new:

Devices

Added thermostatOperatingState interface for Linked thermostats.
Added direct access to KNX communication (both sending and recieving packets) from the API.

Gateway connection

Enabling Support Access and Remote Access on the Master hub also enables access on slave hubs.

Nice*

Other

Verification of the checksum when downloading the update file at the beginning of the process instead of at the end.

Bug Fixes:

Climate

Fixed an issue where an added temperature sensor was removed from the climate panel when editing other settings in that panel.
Fixes an error occurs after deleting a device in the climate schedule.

Devices

Elero

Gateway connection

Fixed errors and incorrect display of options in association settings.
Fixed IP address validation in the Gateway Connection tab.

Nice*

Fixed keep-alive support for Domi WSR/WS device, which caused the device to be shown as disconnected in the system.

Other

Quick Apps

Scenes

Known issues:

Z-Wave Engine 3.0

Some Z-Wave devices are not fully compatible with the new version of Z-Wave engine.

* - Does not apply to HC3L (Home Center 3 Lite).
** - Applies only to Z-Wave 3.0 engine.
*** - Fully supported in the upcoming Yubii v2.5.3 application