T.Konopka

@modern , Android Auto is not available for HC2 or HCL.

@Merrilltom , yes, this setting will definitely drain the battery. Check the manual https://manuals.fibaro.com/motion-sensor/#post-989 If the MS is put in the earthquake mode it will report on any vibrations detected. So, it definitely reports more than the MS configured as 'tamper only'.

@petergebruers , well well well Capacitor chooose on LM2940? - Support - Dangerous Things Forum Thread locked

I am happy that we could solve the case Now, I would like to remind you that we are using a ticketing system that queue the cases from the oldest to the newest - oldest being the ones requiring immediate attention. If you send one email it will simply go up the queue and it will be addressed accordingly. However, if you will send a couple of emails separately they will be treated as separate cases in a queue and they will be addressed from the OLDEST one. Sending 'reminders' does not do anything within this system. So... simply send your email and wait for a reply. Alternatively, you can call the Support regarding lack of reply

@Bodyart , I contacted you via private message regarding your Support cases. @SmartHomeEddy , you were warned for foul language. I do not accept any profanity here in the Forum. @Sankotronic and @gsmart I approved your files in Downloads section. Please, contact me in case that the approval takes longer than 24 hours. @Sjakie , thank you for your kind words!

We are aware of the problem and we would like to apologize for the inconvenience. Our provider is trying to fix it as we speak.

@DeJaPa FIBARO would like to resolve the problem and we would like to ask you for additional details regarding the problem that you are facing. There is a separate thread in which we ask for specific pieces of information. Please leave a comment there:

Drodzy użytkownicy FIBARO, W związku ze zgłoszeniami dotyczącymi trudności z dodawaniem FIBARO Wall Plug HK do aplikacji FIBARO for HomeKit Devices chcielibyśmy prosić o pomoc w sprawnym zdiagnozowaniu przyczyny problemu. Zależy nam na jak najszybszym ustaleniu przyczyny i dlatego prosimy wszystkich, którzy napotkali podobne utrudnienia o podanie w komentarzu następujących informacji: - model urządzenia, z którego dodawany jest Wall Plug - wersja iOS - wersja firmware Wall Pluga - model oraz wersja firmware routera - wykorzystywane pasmo Wi-Fi Jeśli urządzenie wcześniej działało to będziemy wdzięczni za podanie szczegółów dotyczących tej konfiguracji.

Dear FIBARO users, Due to reports regarding difficulties with adding the device to our FIBARO for HomeKit Devices app, we would like to ask you for assistance in diagnosing the problem. We would like to resolve the issue as quickly as possible, and thus users who encountered similar problems are asked to leave a comment with the following details: - device used to add FIBARO Wall Plug - iOS version - firmware version of your Wall Plug - type and firmware version of your router - type of Wi-Fi If FIBARO Wall Plug used to work before, please share details about that configuration as well.

I agree 100% if that was a result of a planned migration, update, etc. Otherwise, it is sometimes better to focus straight on fixing the actual issue. Nevertheless, you have a valid point and hopefully we will be able to kill two birds with one stone in the future.

Perhaps I was understood too literally. We were on the case before and It was merely a polite way to acknowledge users that we got their message.

The link is missing because it was no longer valid. The amount of applications that we received just within the first week went beyond our wildest dreams. This was of course great news for us, but there are limits when it comes to the overall number of testers that can participate in the project. Although you won't be able to participate in the early Access program, it won't be long before you can try out the actual app

Thank you for notifying us, we are investigating this as we speak.

Dear Users, We have good news for those of you who are residents in Holland or Belgium and have been thinking of switching to Home Center 3 recently! FIBARO together with Google Store offer Nest Hub - totally free of charge when buying Home Center 3 at one of selected retailers or dealers. Check out the details of the promo as well as examples of amazing opportunities both products offer here: https://www.fibaro.com/nl/the-smart-google-promo/

Strasznie mi przykro, że po wielu wymianach urządzenie nie działa poprawnie:( Czy możesz przesłać mi w prywatnej wiadomości numery seryjne urządzeń, które były już u nas?

Dear FIBARO users, Due to a large number of inquiries regarding a new FIBARO Tablet app compatible with the latest Home Center 3, Home Center 3 and Home Center Lite we would like to announce that FIBARO is launching an Early Access program. If you would like to participate as one of the testers, please fill out the following form: Selected users will receive a reply with an instruction on how to proceed. Please note that the verification process of adding testers to the program will take at least two weeks, and thus we ask for patience. We’re counting on your assistance ?

@SmartHomeEddy, you are right it shouldn't work that way. I believe that it should now generate the contact in the proper section.

@Martin_N does it work as expected now?

@Bodyart please give it a moment to sync in, I didn't want to return with an update until all was clear. Some of the content should already be assigned to the rightful owner again. Here is an example:

Please let me know if the function works for you now.

I am deeply sorry for this very unfortunate situation. I have already escalated the problem to have it fixed ASAP.

@mvek, @Stefan Uzunov, @Twan123 we tried to recreate the problem but with no effect. Please send a screenshot of the notification to our support at [email protected]. This will be very helpful in analyzing the problem.

@bornet_sj0u, @Comfortica, @boa the problem has been fixed. Can you please confirm whether or not you are still experiencing the problem?

@interested , go to Settings -> 6. General -> Main -> Name

That will be Remote Support Access: Access->Remote Access -> Support Access. Make sure to provide HC serial number in the emai as well.