Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


Willem-Jan

Member
  • Posts

    32
  • Joined

  • Last visited

Everything posted by Willem-Jan

  1. We have 4 Rainbird valves for 4 different zones. We used to have a very small Rainbird computer we had to re-program it every year.... So I replaced it with a 24 VAC adapter and zwave switches. With that we can use the irrigation schedule in the HC3. On the HC3, it also can be combined with weather info to influence the schedule.
  2. Yep, that does the trick. Thanks! Strange this as I got the same problem on Chrome. Anyway, it is solved.
  3. Hi, I have an HC3 with 5.140.17 running with several zwave as well and zigbee devices connected. It is stable and everything runs as it should. But since today, I cannot open /app/settings/devices anymore. All other panels open without a problem, but the devices part simples does nothing. There are also no errors visible in the Fibaro environment. When I open the browser inpection page of Edge, I see some errors like: Uncaught SyntaxError: Invalid or unexpected token (at ERROR Error: Uncaught (in promise): ChunkLoadError: Loading chunk 1507 failed. I don't know whether this is a normal error or not. With other pages, I do not see this error. I already rebooted the system, cleared the cache of the browser and used another browser, but it simple won't load anymore. Does anyone have an idea what the problem can be? Thanks, Willem-Jan
  4. Per room or area to be heated, you can define a zone in the settings -> climate panel. In the upper right corner (pencil) you can define which sensor needs to be used for temperature and which devices are controlled. You need to add a separate quick app to switch on the boiler when one of the zones requires heat. That was also the case in HC2.
  5. I already found a solution: Switch for the zone from heating to cooling, change something and save the zone. Then switch back to heating and update the sensor and it will be saved without an error. Maybe a change in the heating is also enough..... This item can be closed.
  6. Recently, I added a number of zigbee temperature sensors (Aqara) instead of the temperature sensors of Fibaro motion sensors. In the climate settings, I've updated the temperature sensor to use the new ones. But in most rooms, there are not stored. I can select the sensor and select the save button, but when selecting I get an error 'cannot update zone'. The selected sensor remains in the zone, but when leaving the climate settings and returning, the temperature selected sensor is not selected anymore. Is there a way to solve this? Thanks, Willem-Jan
  7. No, there is no option to do that. The only solution is to make a LUA script to read the heat panel for the settings and do the actual control within the script. But the temperature does not showup as room temperature. You can create a VD to show the temperature.
  8. I used Rainbird 24 ADC valves to open certain areas. With relais switches you can control the valves and with a 230V switch the pump. In the Fibaro HC2/L there is a irrigation panel where you can set times. If you use a HC2, you can add a script which delays the irrigation in case of rain or increases the time in case of dry season.
  9. The virtual device is capturing temperature from an external device. This is not a z-wave device. Therefore, it does not show up as (possible) temperature of the room and can also not be used in the heating panel.
  10. If a temperature sensor is installed in a room, that one is selected as temperature for the room (displayed at several places on the UI and used in heat control or so). Is is possible to have a value of virtual device defined as temperature of the room? Sorry, I found another item about this subject. This can be closed.
  11. I also tried the Aeotec Smart Dimmer. After including it, the dimmer works, but still has 'not configured' with every device. I'm not sure, it is a big issue, as they seem to work. The biggest problem is that they cannot be used in a scene (graphical blocks) on a HCL.
  12. Hi, I have a some Smart Dimmer 6 modules from Aeotec which are connected to a HCL (v4.160). Including and switching/dimming works OK, but I cannot use them in a scene (graphical). Is there any way, that can be solved (e.g. by adding the template manually)? Thanks. Willem-Jan
  13. The dimmer is for dimming only one light (or two, but then the cannot be dimmed independently). The S1/Sx connections are for the single or double switch (again to control one light). See also the manual of the dimmer 2 module.
  14. I have Finder 22.21.8.230.4000 (max 20A load on 230V). I already have them for years and I never had a problem of one getting stuck.
  15. I have a number of power outlets which are controller from a central place by way of relays. To make sure, there is problem whatever you plug in, I have Finder relays which are controlled by ZWave relays. The Finder relays are really very good and never get stuck. Maybe a bit overkill, but just to be sure....
  16. If you want to control temperature for all rooms at once, you can control the pump with a wall switch or relay switch with a single temperature sensor. If you want to control the rooms separately, you can use valves per room/group with relay switches and a temperature sensor (e.g. Fibaro Motion) per room. Be aware that the pump needs to run now and then, to make sure it does not get stuck (e.g. in summer).
  17. I have a smoke sensor version 3.3 which gives a 1.5 degrees difference with other thermometers, so I would like to correct that. Before the template items, there is a temperature correction time (-100 .. +100 degrees). I tried that, but it does not seem to store the value. Is there a way to use that?
  18. Hi, although Somfy RTS has nothing to do with zwave and Fibaro, you can use a raspberry with domoticz and a Rfxcom transceiver to control Somfy RTS motors. If you sent me a PM, I can provide you more detailed info.
  19. 1./3. know it is not an error. The modules work fine and when a certain feature needs to be changed, the item can be manaully added. But that is far from convenient. 2. Why is it hard to include the template? On Domoticz and other systems, there is no problem at all to include the Qubino modules. I've sent the email to Fibaro support for the templates (like is suggested on the HC2 when a module is added), but until now, there is no answer. I can understand that Fibaro prefers to use Fibaro modules, but for some functions, they simply don't have a solution available (like the DC shutter).
  20. Hi, I'm working on a Home Center 2. With all Qubino modules sofar (flush dimmer, Shutter DC, relay 2 and relay 1) there is an error that there is no template available. For Fibaro sensor and dim modules, it works fine. How do I get the correct templates in the Home Center and where can I find them? Thanks! Willem-Jan
  21. Icons replaced on location and that indeed works. Thanks!
  22. That is at a customers location, so not really happy about this!
  23. I'm trying via the remote login. Since I'm not at the location, I;m not able to test with local access.
×
×
  • Create New...