Gee

How to synchronize the mode, temperature and wind speed of two HVAC I can't find a way in the associated page. Is there any way to synchronize with LUA scenes or other ways? Thank you

可以参考这个 https://mp.weixin.qq.com/s/riB44TqxmoXUmNK-KCjNAQhttps://mp.weixin.qq.com/s/riB44TqxmoXUmNK-KCjNAQ

I think it may not be created two variables, specifically look at the instructions attached to the downloaded VD. There is another way to control the SONOS plugin. ↓↓↓ https://mp.weixin.qq.com/s/ONAv6B83W17RNZSznfroRw

If logged in, he will not display login dialogue. If he logs off, he will appear。 What remote control do you use? Browser?

Hi @jakub.jezek, Yes, I used to control this post's VD. Does anyone know when the plug-in can be repaired? Or does the plug-in work? I won't use the plug-in?

Is there any instructions for using the Philips Hue plug-in? Because I was unable to use before, control did not respond. After that, replacing the solution controlled by the virtual device solved the customer's problem.

Thk，not ,it can not boot

Hello，We very much hope to get your help I have two HC2, I call A and B. A can not boot,B can work normally, I want to keep A inside the data . 1 we try to enter the recovery mode, but it shows this, I do not know what that means [A bootable device has not been detected. Please refer to the Product Guide at http://support.intel.com/support/motherboards/desktop] 2 We also try to "VGA" to connect the monitor and HC, but do not know what to do after boot 3 Can I transfer disk A to B HC?A data is present inside this disk, right? We tried a variety of combinations, but still can not read the disk A data on the B HC

TCP port to fill what? 1400? 1433? In addition, how to control Sonos plugins in scenes or virtual devices

Can you control Sonos Play: 1 with a virtual device? How many versions of Sonos' virtual devices? Can you share I seem to be 1.0,

I want to control SONOS through VD on HC2, but recently I found that after Sonos update, VD can not be used, what to do?

wow,Understand that if I have a lot of Fibaro device, is it necessary to write a lot of corresponding Http request URL

I came to share my overflow sensor after the trigger, turn off the faucet, RGBW will blue light, red flash. --[[ %% properties 1671 value %% events %% globals --]] --1671 overflow --1633 Switch valve --1637 RGBW alarm =tonumber(fibaro:getValue(1671, "value")) fibaro:debug(alarm) if(alarm>0) then while(1==1) do fibaro:debug('触发') fibaro:call(1633,"turnOff") fibaro:call(1637, "turnOn") fibaro:call(1637, "setB", "255") fibaro:sleep(500) fibaro:call(1637, "turnOff") fibaro:call(1637, "setR", "255") fibaro:sleep(500) fibaro:call(1637, "turnOff") no_alarm =tonumber(fibaro:getValue(1671, "value")) if(no_alarm==0) then fibaro:call(1637, "turnOff") fibaro:call(1633,"turnOn") break end end else fibaro:debug('不触发') fibaro:call(1637, "turnOff") fibaro:call(1633,"turnOn") end

The Lua Scenes

Hello everyone Can Hass support Fibaro? How does this need to configure 'Configuration.yaml' 2, Hass access FIbaro, which needs to install HOmebridge? (Homebridge-fc2)