Idrak

Thank you for feedback any way. Will look forward for answers:) But I think, campatibility list is very nesceserry for Fibaro.

Yes, i know about Radiator Thermostats, but the problem is, i need wall mount thermostat like nest or 2gig C100 which can control also my AC snd Ventilation

petergebruers thank u too. I have a question, but i can not find the answer on any forum. Maybe u can help me. I need some list of compatible devices with fibaro. I mean, for examp. i need to find best Thermostat for Fibaro, and i know that Nest, Ecobee, Honeywell and so on is available on market. So do Fibaro have some list, to see all devices?

Hi to all. Problem is solved. So what was the problem. We have 3 controllers with EU standart 868.42 MHz - this items were sent me from Turkey We have 3 modules Aeotech (SmartPlug and Multisensor 6). Also 868.42 MHz. But the connection was not working. So we found way to update firmware of this modules by USB ZWave stick. And Haleluyah! Connection was succeseful! Other modules from Zippato and Fibaro was sent to us from Russia. I didn't know, that Russia have own ZWave freguncy standart. But when i looked to back of this modules, i saw 869.4 Mhz... or smth like this. So it is look like EU standart, and we were thinking it IS EU standart. Any way, thanks to all for feed backs and helping!

Hi peterburger! Thank you for reply. No, in this case after Reseting HC2 and HC lite controllers must be solved. But even restoring to stock firmware not helping. We was thinking about this type of problem, because we are using som wireless stuff in our office, like Decawave1000 and others, so we changed location of our devices but nothing...same problem... Yes, after pushing "delete" button, the delete window pops up an the counter starts counting down from 30. But after 3-click on any module the countdown does not stop and instead keeps counting down to zero. I was also thinking about problem with rx/tx radio, but all 3 HC controllers (1 HC2 and 2 HC Lite) with the same problem? it is nonsense... I have installed OpenHab with USB Zwave stick on pc, and can see modules from it. Can add them. That is the most insane... Fibaro controllers can't see the fibaro devices, but openhab can do it... I think it does mak sense

I tried but nothing happens. It's insane We tried 3 HC devices and 5-6 modules. Nothing. It is not hardware problem 100%. Because, there is no chance of 3 HC with same problem. It is not problem of modules 100%. Because, there is no chance all modules came with same problem. So, what can it be?

For this procedure, as i know, i need module to be added somwhere. But the module is new, and was never added to any controller. Maximum what can i do is reset. For example for remotec Press and hold "PROG" button for 10 seconds on ZXT-120. During the key hold period, RED LED lights up at around 5 seconds, then, it will flash twice until reset process is completed at around 10 seconds. And so on... Sure, all my devices in one ZWave bande. EU 868.42 Mhz. Any other ideas? I don't understand this. It is smth like non logical.

Hi @I.Srodka I just saying, that i'm not new for Fibaro, so i have installed one successefull on my client appartment. And it is working fine till now. But, i can't do some experiments with my clienst working HC2. Hes Fibaro HC2 working with his own username and password. For new project, i have ordered HC2 and HC Lite from the same distributor. As you understand i'm not re-adding devices. I just trying to add them for the first time ever. Almost all devices is brand new. No, i can't remove any device, because they are not added yet. I have looked Reset procedure for each device and HC at youtube. I think it is simple. And don't think it can help me

Hi to all, I'm new for this forum, but not for Fibaro system. My problem is very strange, and I don't know what to do in this case. So what is going on.... I have several sensors and devices like : Fibaro Smart Plug Aeotec Smart Plug Fibaro Smoke Sensor Aeotec Multisensor 6 Remotec IR blaster and so on... Also I have Fibaro HC2 and 2 Fibaro HC Lite. And the problem is that I can't add any device on any of this HC. Putting any sensor or device in adding mode, then Pushing add button in Add device, HC standing in learning mode. And nothing, 30 seconds, and nothing. I tried sensor reseting, HC resetting, Network and location changing, i tried everything. Also i asked from my friend, to add some of my devices to his HC Lite, not working. Then I asked to add some of his devices to my HCenters. NOT working! Also we tried to add his devices to his HC. NOT WORKING! I can't understand, what is going on? Anyone have the same problem?