colhemm

Hi tinman, I understand that you've integrated many Tuya devices into HC3 and would really appreciate your help. I have a ceiling fan with light that's Wi-Fi Tuya enabled that I really want to integrate into HC3, I have the Device ID and Local key but i'm having trouble trying to work out how to do the rest to integrate it into HC3. Could you please help me do the rest of the integration. https://www.en.mantrailuminacion.com/productos-mantra/Himalaya Thanks for any help

Hi Martin, I had an old model so bought the new V.2 one and that fixed it.

Hi jakub.jezek How do i displayed the room temperature? and could you explain to me how to set up the slave device? Thanks

Hi jakub.jezek Sorry but I do not understand your response, when I had the MCO Home MH7H-WH installed on my old Vera Edge hub it clearly displayed the room temperature so I know the room thermostat works, how can I get it to display in the HC3.

Hi I've recently installed the MCO Home MH7H-WH water heater and thermostat into HC3, everything went very smoothly but I cannot see the room temperature settings, it just reads "Thermostat state Idle" is it possible to activate the thermostat and displayed in HC3.

Hi All i have exactly the same problem but i'm very new to this, can you tell me where you put this " fibaro.getValue(55, "thermostatOperatingState") " Thanks

Hi Marino Martin, thank you so much for this, it was exactly what I needed. After deleting the code I did not need, the little bit of code below was all I needed. I can now keep a track of any infrared device as to whether it's on or off. function QuickApp:turnOn() self:debug("ON") self:updateProperty("value", true) self:send("sendir,1:3,9,37878,1,1,171,171,21,64,21,64,21,64,21,22,21,22,21,22,21,22,21,22,21,64,21,64,21,64,21,22,21,22,21,22,21,22,21,22,21,22,21,64,21,22,21,22,21,22,21,22,21,22,21,22,21,64,21,22,21,64,21,64,21,64,21,64,21,64,21,64,21,17790x0D0x0A",true) end function QuickApp:turnOff() self:debug("OFF") self:updateProperty("value", false) self:send("sendir,1:3,9,37878,1,1,171,171,21,64,21,64,21,64,21,22,21,22,21,22,21,22,21,22,21,64,21,64,21,64,21,22,21,22,21,22,21,22,21,22,21,22,21,64,21,22,21,22,21,22,21,22,21,22,21,22,21,64,21,22,21,64,21,64,21,64,21,64,21,64,21,64,21,17790x0D0x0A",true) end ---Initializing Functions---- function QuickApp:onInit() self.ip = self:getVariable("ip") self.port = tonumber(self:getVariable("port")) print("Initializing device: ", self.name,"(",self.id,")") self.sock = net.TCPSocket() end

Hi all Can this binary switch be used to send two infrared signals for On/Off using the Global Cache itach?

Hi cagol4 Yes, i need an On/Off Quick App to send 2 command to my global cache itach. I need the On/Off switch so it can keep track of the On/Off status. I'm not very good with the coding so I would very much appreciate any help on how to code the Quick App Binary switch to send the commands to my itech.

Hi all, I would like to create a virtual switch to trigger infrared On Off actions in Quick Apps, Anyone help with this virtual device would be very much appreciated.

Hi tormentor That's exactly what happens to me, and looking at the poor response I get the feeling this will never be resolved, which is very frustrating when you've invested so much money and time into this system.

Hi all, has anybody work out or know if it's possible to integrate the 2N IP Verso intercom in to HC3. Thanks for any help

Hi, I have Mantra ceiling fan with light that is WIFI Tuya enabled, I do have the ID and local key for the fan, any help integrating this into HC3 will be very much appreciated. Thanks for any help

Hi, could you please help me do this Tuya integration with HC3. Thank you for any help Colin

Hi, i bought the Fibaro Double Switch 2 Gen5 and a Fibaro Single Switch 2 Gen5 to control my hallway light. I created an Association with Fibaro Single Switch to the Fibaro Double Switch so I could control the Fibaro Double Switch S2 switch from the top of the stairs and from the bottom in my hallway. When the Fibaro Single Switch (The Transmitter) is set to toggle switching (Variable 20, 1byte dec, 1) it works ok, but when I change it to Momentary (Variable 20, 1byte dec, 0) switching It does not work (It does not turn light on or off) it's as if the Fibaro Double Switch does not receive the signal sent to it or ignores it? Thanks for any help Colin