Fibber

Fibaro replied that maybe in the new SW version it would fix it. But like write sorry, and that it does not work, what the hell is it?!?

In the RGBW 2 setting, there is no option to add your own program (photo). I have HC Lite. Where's the mistake? I have 4.570 SW. In the setting there is space for 5 own scenes (photo). Thank you

New app doesn't offer this option

Hello, after replacing the battery at Fibaro KeyFob, the keychain has become angry. After the first use, switching on the scene, then any red button shines long red ice. Unlocking doesn't work either. It looks like it's not in the system. When I press a button several times, mostly a triangle, a white LED starts blinking and KeyFob can be added to the system. I did that by removing KeyFob, restarting the HC Lite, then adding, setting, everything OK. But then the same thing happened, after using KeyFob for the first time, the red LED once again illuminated for any squeezing and again it can be added to the system again. I also tried to restore the system from a backup, but it does the same. I did the removal, adding, about 10 times, the same result every time, after the first use again a longer glowing red saltpeter. I cleared the consumption meters and it didn't help either. What with this? This started to do after replacing the battery, there is a new, functional one. The unit is HC Lite version 4.570. It worked before replacing the KeyFob battery in this version. Thank you for your advice.

Again, the detailed display of the Alarm panel in the mobile phone does not work. This time nothing helps, and detail is not displayed. Oh no...

Hello, I want to ask, do you have any info that Fibaro warheads get stuck here and there even when it is set to off? I have already done this 1 head 2x, I had to do calibration. And today it looks like another head, the temperature sensor still reports a higher temperature even when it is cold enough outside. I'll see when I get home. Thank you

Thank you, this tutorial helped. I'm just sorry I lost my date of consumption ... EDIT: So the operation lasted for 15 minutes, after recording some consumption again scenes do not ...

I see the scenes, see. video. But they do not respond to anything, see. video. This video:

Hello, did not you know that any scene did not work? I had 4.520, it stopped working this weekend, I updated to 4.530, then to 4.531 Beta and still the same, there are no scenes at all and I do not know why. I did not change anything in HCL, did not ... When I click on the play icon in the scene, the pause button is made and there is still and lightly colored. It does not react anymore, it disappears only when the scene is switched off by the OFF button and then when I turn to ON, there is the play button again and once again it is poured and then it is turned around

Hello, I have a question see. below: I have 1 light in the corridor (triple light point), it is controlled by two single-switches. On 1 picture is the A driver On 2 figures is the B driver I want to plug in the Fibaro single switch 2 in figure 3 Fibaro connected - i video, how to plug a classic one light - one switch. Fibaro Single switch 2 is plugged into Controller A, where all the cables are needed - black, brown, gray, blue, as the B cable is only black, brown and gray. Where and how does the Fibaro Single switch 2 according to the scheme of Figure 3 Fibaro plug in and plug in the video? I do not even know exactly how I'm connected to the light with switches A and B, Plug version 1, 2 and 3. Will you help me? It's not a problem for me to get involved, I only need to know how. Now I'm looking at it, the brown L on the original is the switch A from the light, but the supply is not there, so it would have to stretch there to be involved in the new scheme? Thank you

What to do again? I reset from backup after updating to 4.504 Beta, nothing. I rebooted, switched off and on again, disconnected from the power supply and nothing, it just does not work!

Since 1.8.2018, my remote access does not work. In the Wi-Fi network, I connect to HCL on both the mobile and the PC, outside the wi-fi network, which is also HCL, is not a remote connection. I did not change anything, did not set anything in either the router or HCL, nothing at all. It just stopped doing nothing. What with this? Where is the problem? Everybody puts their hands away and I do not enjoy it, the whole system is nothing! HELP!!! After updating to 4.504 Beta, it worked for about 1-2 months, it stopped, it changed nothing, I did not change anything, did not set it up, just for no reason!

Since 1.8.2018, my remote access does not work. In the Wi-Fi network, I connect to HCL on both the mobile and the PC, outside the wi-fi network, which is also HCL, is not a remote connection. I did not change anything, did not set anything in either the router or HCL, nothing at all. It just stopped doing nothing. What with this? Where is the problem? Everybody puts their hands away and I do not enjoy it, the whole system is nothing! HELP!!!

Since 1.8.2018, my remote access does not work. In the Wi-Fi network, I connect to HCL on both the mobile and the PC, outside the wi-fi network, which is also HCL, is not a remote connection. I did not change anything, did not set anything in either the router or HCL, nothing at all. It just stopped doing nothing. What with this? Where is the problem? Everybody puts their hands away and I do not enjoy it, the whole system is nothing! HELP!!!