m.roszak

Wersja centrali i wersja aplikacji?

Ok, fixed. The next version resolves this, is should be available pretty fast. Soft-reconfigration will be required.

Hello, looks like an issue in the system. We will check it out.

The system probably cashed some data, don't worry about it.

+1 We will check it out.

Just no such functionality

Looking on the graph, it report thousands of the values - database won't handle this so older data is being erased. If you like to have longer logs reduce the intensity. Keep in mind that power reports have a global limit per all devices, not a individual limit. Good thing is that actual consumption (kWh) is stored seperatly, this is just an instant power which is something different.

I meant that the behavior of those modules is inconsistent - sometimes those can work ok for several weeks, then - they just stop to report some or all values. It is something in the device firmware, not the hub - we already confirmed this. That is why we changed the default configuration some time ago to workaround a bit this issue. Of course, they did not change anything remotely, if you would like - download the logs dump from the hub and I will make sure that the device is just not sending us the values and it is not an error in the hub somehow - just create a support ticket and put the logs there, include the information about device ID in the system.

Actually, it is for a purpose, it's a siren - to be used in scenes in correlation with the alarm panel if someone is interested. Due to the lack of actual use cases to be shown as an actor - it is just hidden.

The topic should be "Qubino stops reporting voltage" - that is not on the hub side. The way the hub works, if the report is sent we are processing it, it is not like one of the values may be ignored and the rest are ok. We contacted Quibino about some issues in the devices (problems with reporting values, not working interval-based reporting) but "they are no longer updating the 500 series devices" and those are on the EOL (end-of-life) phase.

Świetny feedback, bardzo konkretny

https://smarterhome.sk/en/weather-stations/analog-wind-speed-meter-with-0-10v-dc-output-599.html with smart implant? If you are talking about Z-Wave devices

Network wide inclusion and network wide exclusion was introduced in the newer Z-Wave SDK, FGS221 is an old 300 series module which does not support it on the protocol level.

This is in progress It does not work on Android only, on iOS its working ok. The rest, we will evaluate what we can and what we can't do. As for the Switch issue, it works ok for new views, I will check what we could do in webview solution there. How to handle switch, I will paste it later in the separate topic you are asking for an explanation.

Did you contact support?