Kamol_

Hi, I know that hc2 is a voip server https://manuals.fibaro.com/knowledge-base-browse/using-fibaro-home-center-2-as-a-voip-server-and-linphone-as-a-sip-client/ You can use SIP clients to use that server to call each other.

You should add the roller shutter to existing Z-Wave network To add the device to the Z-Wave network using auto-inclusion: Disconnect power supply from the device Place the roller shutter within the direct range of your Z-Wave controller Set the main controller in add mode (see the controller’s manual) Connect power supply to the device to start auto-inclusion Wait for the adding process to end Successful adding will be confirmed by the Z-Wave controller’s message I think that Roller shutter will not be working without zwave connection to hc2

Hi, Look in to the manual of Qubino dimmer - all paramaters should be there.

Hi, Can somebody help me with thise connection - relay switch fgs-211 to strike look. These below unfortunately don't work properly for me. I have relay swtich - 1x3kw - single switch ------------------------------------------------------------------------------------------------------------------------------------- Czy mógłbym prosić o pomoc w podłączeniu switcha fgs-211 do elektrozaczepu? Podłączenie jak na poniższym rysunku nie działa mi prawidłowo. Mój switch to 1x3kw - jednoobwodowy.

Hi, I don't think it's possible. There is no native chromecast api. it's not a matter of Fibaro possibilites - just Google doesn't allow that. Turning off the TV is done by Google Home via the ongoing encrypted connection to Google. The Google Assistant doesn't make a direct connection to the Chromecast as there are no open incoming ports behind the NAT connection. You have to buy another device like broadlink rm pro (hardware for sending IR commands) or use fibaro wall plug (power off tv) You can always check your tv manual - look up for the POST/GET HTTP commands and use them in fibaro lua scene.

Fibaro solved this problem today (after 12 days of waiting) on 14 October - updates are now available for older firmwares

Nice joke.

Hi, I have the same situation: no pushes, no camera email, no visible update

Hi. From 2 October (evening hours) the notifications from HC2 control panel with v4.100 system stopped arriving. I also cannot send pictures from the cameras to e-mail addresses. The proposal to update the hc2 software has disappeared. All this happened after fibaro cloud maintnance announced at 2 October. Does anyone with older software have a similar situation - is it the end of support for other than the latest firmware. -------------- Fibaro fixed this problem today on 14 October (after 12 days of waiting) - push through notifications, emails and updates are now available for older firmwares

To wstyd napisać, że będziesz okradał Fibaro na ich własnym forum.

Hi maybe that will help you figure that out:

it is mostlikely the battery. https://forum.fibaro.com/topic/23370-hc2-will-not-boot-af-power-failure/

Everythings works after changing linie 31 for: except IOError: Thanks

Ja także przymierzam się do zakupu takiej kamery zewnętrznej.. Najbardziej podoba mi się Netatmo Presence (mam wersję wewnętrzną Netatmo Welcome) Głównie ze względu na możliwość nagrywania na wewnętrzną kartę SD - nagrania ruchu i rozpoznania dostępne są za pomocą aplikacji Netatmo. Kamera jest widoczna w homekit oraz w UI fibaro i aplikacji fibaro. Czy ktoś może coś polecić innego?