Mickler

I solved it through Brightness. Check if Brightness 0%

I can't see the black remote controller for my Dimmer 2. Is their any solution to activate the black remote controller for the Dimmer 2? I have checked the Parameter 28. Parameter is set to 1. I am surprised, because I see the black remote controller for e.g. a roller shutter in the device list. So, I can configure the shutter in the block scene with regard to sceneactivation. I would also be interested in a LUA solution for sceneactivation.

@I.Srodka ...thanks for support. The error „DependentServiceUnavailableError“ is no longer displayed. Simple switching of lamps is now possible. Now German language would be great, since my lamps are all German and „Google Assistant“ does not understand german speaking with English settings. The error "Show list of scenes" does not work for me, too. I get the feedback that the list is empty. Do I have to adjust something in the HC2? A list of possible commands would be great. Can I find a list somewhere? Regards, Mick

@I.SrodkaHow can we help you with testing? It's nice to hear that Google Home Implementation is progressing. I have tested it. Unfortunately, I have the same mistake (DependentServiceUnavailableError). I hope the functions are given soon and everything is running smoothly. Phone: LG G4 – Android 7.0 (Stock ROM)

Hello, I have the same or similar problems. I have been using smoke detectors of version 2 for nearly 2 years. I would like to share my experiences with you over the last two years. In the first year: I had installed two smoke detectors in the basement, they had produced false alarms after about 6 months. Preferably at night. These I have sent back after several times of troubleshooting(sensitivity adjusted, Blowing with compressor, basement ventilation multiple as usual, take battery a couple of days away) to the seller. (No exchange, in which case I preferred the money.) Three other smoke detectors (version 2), which are distributed in the house, also reported alternating frequently false alarms. Again for no apparent reason. The values in the UI of the smoke detector give no information or the UI has no values only the temperature. But the temperature was static. If I have problems, then preferably at night. And when it starts again with false alarms, then usually several nights in succession. In the second year: I can circumscribe the false alarms. The false alarms are dependent on the season. The smoke detectors make most false alarms in the summer months. Almost, several nights, always again. In the winter months it is isolated, rather, if it is perhaps in the rooms by heating a little warmer. I also tried to exchange the smoke detectors between the rooms. What is noticeable was interesting, a smoke detector (ground floor), which had never produced false alarms so far, I packed into the attic, where there were more frequent false alarms. And it did not take long, then this smoke detector also had false alarms. Of 9 smoke detectors, 7 smoke detectors often have false alarms. The two smoke detectors, which have no false alarms, are on the ground floor. All other smoke detectors on the upper floor, attic or cellar have always had false alarms. After the false alarms accumulated at the end of July, I removed all smoke detectors with false alarms in the rooms and placed them directly (30 cm away) next to the antenna from the HC2 (in the basement). Since then the smoke detectors have not had a false alarm. (since two and a half month) My personal conclusion I had a long time the hope that Fibaro provides a solution to the known problems. But, you have to keep in mind that after so many false alarms, the confidence in the smoke detectors is no longer given, because you only think of a false alarm instead of a fire alarm. Apart from the countless sleepless nights. According to the findings in the last two years, the smoke detectors go back to the seller before the warranty is over and I let the seller refund my money. In my opinion, Fibaro has miss, despite known problems, to present a solution against the false alarms in recent years.

Thanks for reply. But that was not the question. The question was: "Is it possible to check the drenchingMode over the LUA API?" The solution should be. Check and set the value ("mode"), each with one line of code

fibaro:call(1, 'wakeUpAllDevices', deviceID)

I need some help. I can not exclude my Roller Shutter about a toogle switch. I've tried three position changes(S1)but it isn't working. Can anyone help?

+1

Hi, has anything changed in the situation? I am in the same situation. After 6 months, the second smoke detector now has produced a false alarm. Smoke Sensor detected fire. The only thing I can see in the overview is that there was a rise in temperature by one degree. The smoke detectors have all default values. Should you still adjust the values? The smoke detector reports since multiple false alarms. Did I have to perform a maintenance on the smoke detectors (i.e. blow out)? Is there a solution via the configuration or the smoke detector are broken? Ready for the dustbin?

Hi, following code example ... local deviceID = 163 fibaro:call(deviceID, "setDrenchingMode", "auto") ...is possible to set the DrenchingMode, too. But one question. Is it possible to check the drenchingMode over the LUA API? I get a "nil" value, if I check the drenchingMode property over fibaro:getValue(deviceID, "mode");

Example for a global Value: fibaro:debug("Value = "..tostring(fibaro:getGlobalValue("<valueName>"))..");

http://forum.fibaro.com/index.php?/topic/16908-rain-detection-real-time/?p=67471

edit: Ah sorry, first video was blocked for me. AutoVoice is described. But I think AutoVoice is the best solution next to fibaro. Works very reliably. Hi Roman, check AutoVoice. There is the function implemented you need (no interaction with tablet/smartphone needed, only speaking). It is possible to use "Ok Google" or you make your own keywords. AutoVoice can be used as Tasker Addon. The problem will be the micro. For me it was available when I was just near to my tablet. I was no longer understood two meters from the tablet. Regards, Mick

1. - 3,4 2. - 1,9,10,11 3. - 3