leighivins

Hi, I have a scene setup using two motion detectors to turn offfice lights on an off. When i set the timer to 30s the scene orks perfectly, however. When i set the scene to 1800s which is the preferred timing, the scene does not work. Any help would be much appreciated. Thanks Leigh

Thanks dude

Its a double relay switch 2 I did set the parameters to allow for double and triple switching.

Hi Can anyone help me with double click and triple click on relay switches. I have a relay switch that is being used to control high load lighting circuits, but need to use Scene activation or send dim command for a separate dimmer. Any help greatly appreciated. Thanks

Check your internet upload speed, i have had a problem before where the image is intermitten due to slow upload speeds.

Use this Code --[[ %% properties 25 color %% globals --]] local id_master = 25; -- ID of Master (also change ID above) local id_slaves = 32; -- ID of Slaves, seperated by comma {1}, {1,2,3} local debug = true; -- Debug true or false if debug then fibaro:debug("Syncing RGB"); end function split(s, pattern, maxsplit) local pattern = pattern or ' ' local maxsplit = maxsplit or -1 local s = s local t = {} local patsz = #pattern while maxsplit ~= 0 do local curpos = 1 local found = string.find(s, pattern) if found ~= nil then table.insert(t, string.sub(s, curpos, found - 1)) curpos = found + patsz s = string.sub(s, curpos) else table.insert(t, string.sub(s, curpos)) break end maxsplit = maxsplit - 1 if maxsplit == 0 then table.insert(t, string.sub(s, curpos - patsz - 1)) end end return t end local result = split(fibaro:getValue(id_master, "color"), ',') if debug then fibaro:debug(result[1]..","..result[2]..","..result[3]..","..result[4]); end fibaro:call(32, "setColor", result[1], result[2], result[3], result[4]);

i have also used this method

Hi i would like MP3s for - Alarm Activated The Front door is open The Fridge is open Heating has been turned off Heating has been turned on Alarm deactivated Thanks Man leigh

if you can get away with using dual relays to control 2 circuits you could almost half the amount of modules you will need

HC2 can deal with 230 devices, should be fine

simple reliable gps scene. works everytime just copy to lua scene and change local variables as necessarygps.txt

you cant get temperatuer data from the lc 13, just target temperature.. which is bloody useless.. may as well keep standard trv and just use fibaro motion detectors and a relay switch for the boiler. mine works pretty well but having a slight problem making an away mode for my heating schedule.any help would be apreciatred, im new to lua so have been using a bit of magic block then converting to lua to complete the rest. I have a vertual device which acts as a schedule programer, it includeds boost times, on/off setting times for morning and after noon and home and away mode. i have a global variable for home or away (1 or 0) and then global variables for the timer settings. i have 2 scenes to operate the relay switch to and this is where the problem is --[[ %% autostart %% properties %% events %% globals --]] local sourceTrigger = fibaro:getSourceTrigger(); function tempFunc() local currentDate = os.date("*t"); local startSource = fibaro:getSourceTrigger(); local relay = 114 local startTime1 = fibaro:getGlobalValue('heatingStart1', 'value') local startTime2 = fibaro:getGlobalValue('heatingStart2', 'value') local home = (tonumber (fibaro:getGlobalValue('home', 'value'))) fibaro:debug(startTime1) fibaro:debug(startTime2) fibaro:debug(home) if (home == 0) then fibaro:debug('Away mode active') fibaro:sleep(60*1000) fibaro:startScene(124) fibaro:abort(); elseif ( ( ((currentDate.wday == 1 or currentDate.wday == 2 or currentDate.wday == 3 or currentDate.wday == 4 or currentDate.wday == 5 or currentDate.wday == 6 or currentDate.wday == 7) and string.format("%02d", currentDate.hour) .. ":" .. string.format("%02d", currentDate.min) == "startTime1") or ((currentDate.wday == 1 or currentDate.wday == 2 or currentDate.wday == 3 or currentDate.wday == 4 or currentDate.wday == 5 or currentDate.wday == 6 or currentDate.wday == 7) and string.format("%02d", currentDate.hour) .. ":" .. string.format("%02d", currentDate.min) == "startTime2") ) ) then fibaro:call(relay, "turnOn"); fibaro:debug('Heating is on') end my problem is that wheni activate away mode i get a error on line 252 which is 200 more lines than i have saying " attemp to concatenate local 'deviceId' (a nil value) any ideas??? setTimeout(tempFunc, 60*1000) end if (sourceTrigger["type"] == "autostart") then tempFunc() else local currentDate = os.date("*t"); local startSource = fibaro:getSourceTrigger(); if ( startSource["type"] == "other" ) then fibaro:call(relay, "turnOn"); end end Heating_Controller.vfib

i did have this working brialliantly for a couple of months.. Would recognize when both my wif and i had left the house and would turn everything off and activate the alarms along with a notification to say that it had done it. STOPPED WORKING --- CANT GET IT TO WORK AGAIN ---- WHY FIBARO WHY??