Edb

Hello. Haven't played with my hc for long long time and have just installed some more hue. Ive used the new vd for hue ( amazing as usual) and an old version of UHAS Version 2.0 beta 1D 2018 which as worked fine for what i need it for. SO the vd control the new hue lights but on the UHAS debug Im getting hue vd is missing data. Ive attached some shots. I haven't added the light icons cause the vd is only ever gonna be used for motion lights. Any pointers where Ive gone wrong. . I did try and follow the utube vid but couldn't see where Ive gone wrong, or is it just a case that im using to only a uhas many thanks in advance Ed thanks

hi dave. its been working fine. ive got to 4.151 and havent checked the error but the house is toasty warm ( where it should be) and they all turn off. I solved the heating panel not turning off a rad problem by setting it to 10 degrees rather than off and that seems to cure it. thanks fo rthe script and if fibaro update their devices so i can use a switch as a thermostat ill use your other script and get some window sensors. thanks for the help Ed

just tried it.. seem to work fine. boiler stays on and then turns off when the rads turn off. Ill monitor over the next few days and see how it goes. its nice to have hot rads , before with the boiler cycling every min then took such a long time to get hot, many thanks just manually turned of the rads rather than wait for the temp to turn them off andf got this bebug... 11:00: *** Keep heating on[ERROR] 19:11:00: Cannot query interpreter state its carried on and is working fine again, just maybe was havign a fit cause i turned them off.. thanks

makes perfect sense. TBH i would have thought that when fibaro put a " heating Panel" out with the option to control individual room then they would have left a solution to this problem as well, rather than now having to write a script to finish the job off. many thanks Dave, now all i have to do it ...learn lua !!!! lol that brings me to my next point.if i got it working I would love to use your script for multi room call for heat BUT... seeing that im using switch controlling actuators as radiator thermostats there isn't the option in the controlled devices section in the advanced tab in devices to make it a thermostat. Ive asked fibaro it this can be added cause, surly, im not the only person to have this set up or need. Is there a way of adjusting your script to use a switch instead of looking for the default thermostat?

Hello, ive timed the cycling of the boiler. When single or multiple radiators are calling for heat the boiler switch comes on for 1 min, then off for 1 min, then on for 1 min etc.. and it carries on like that. The radiator valves are on all the time durning the time the boiler is cycling. Thanks ed

Hello, ive got 12 rooms set up, each with a different time and temp. generally all rooms except one are off durning the day. each room has its own radiator valve and motion sensor for temp. the only common linked device is each room has the boiler control ( seen in screen shot above) so the boiler can be turned on as off when the room is calling for heat, otherwise every room is totally independant of the other rooms with no shared devices.

That's exactly how I want to do from mime. Did you write the code urself if so is it possible to share it? So the heating panel controls when it come on but also u have a script to control motion and old Windows?

hello. Ive been using the heating panel for my heating. the set up ive got is fibaro motion sensor 230v normally closed actuator heat on all my radiators controlled by a fibaro single relay wired into the mains and another single fibaro relay controlling the boiler ( just using it as a switch live output when its turned on) the heating panels set up so nothing is on durning the day for each room in the linked devices there is a fibaro motion sensor for temp , the relay controlling the radiator actuator and the boiler relay to call for heat the problems im having are, during the day when all the zones are turned off a couple of the relays controlling the radiators are still on, even though they should be off. and ive noticed that the boiler doesnt stay on for any length of time. with a room calling for heat, the radiator valve are switched on, the boiler comes on for a minute or so, then goes off, then comes on etc has anyone got any ideas why this is happening? many thanks

You don't want me doing any translation... I'm dyslexic.. you'd never understand it afterwards

id like to help. not sure what help i can be but ill try.

Have you thought of licencing it to fibaro to ship with all it hc2's. It looks amazing

thanks, that should solve the problem

hello @Sankotronic, is it possible to set the day times ( night, morning etc) to a static time, problem Ive got , running your VSL script my hall lights keep turning off earlier as i just use the morning, day, evening and night settings for it and at night its turned off, so with the change of sunset time my time to night is gettgin earleir every day. thanks

@Sankotronic. Thanks. I've tried something. Like that already but wiv ur vd I cannot turn on /off. Just adjust levels.

@RH_Dreambox Thanks, i aready use these great vds by Sankotronic. What im trying to do is get the code so when you click a light switch controlled by a dimmer 2 it turns on of off the hue bulb, same as it would if it was a normal bulb. Thanks anyway