duwi repeater

[manuelst 0]

please, can insert the xlm for duwi repeater in fibaro hcl ?

I have a danfoss valve away from the central HCL 4.080 and so I bought a ripertitore duwi. However, the sensor duwi does not seem to do what it must do since I always lose the signal of the valve danfoss.

Please login or register to see this attachment.

[manuelst 0]

On ‎27‎/‎09‎/‎2016 at 2:03 PM, manuelst said:

please, can insert the xlm for duwi repeater in fibaro hcl ?

I have a danfoss valve away from the central HCL 4.080 and so I bought a ripertitore duwi. However, the sensor duwi does not seem to do what it must do since I always lose the signal of the valve danfoss.

Please login or register to see this attachment.

 

news ?

[Flowy 36]

hi Manuel,

I know it does not solve your problem but in case you'll need in the future I recommend to directly buy a Fibaro powered device (switch, dimmer, flood sensor, wall plug, binary) so that you can use it with its normal function plus as a repeater and it is easily controllable through HCL/HC2.

I have Danfoss thermostats and same problem of short signal range (the fault comes from the battery powered sensors I believe and not from the Home Center) solved by installing two Fibaro switches in strategic points of the house. Price is almost the same or a little more than a repeater.

[T.Konopka 8]

On 27.09.2016 at 2:03 PM, manuelst said:

please, can insert the xlm for duwi repeater in fibaro hcl ?

I have a danfoss valve away from the central HCL 4.080 and so I bought a ripertitore duwi. However, the sensor duwi does not seem to do what it must do since I always lose the signal of the valve danfoss.

Please login or register to see this attachment.

Hello,

 

Please, send the file as an attachment in a message to Support at [email protected]

The template will be forwarded automatically forwarded further.