Jump to content
  • Announcements

    • I.Srodka

      Nowa Struktura Forum   01/04/18

      Szanowni Użytkownicy Forum!   Jak zapewne widzicie, na forum zaszła pewna reorganizacja, która będzie w dalszym ciągu postępować.   Od dzisiaj dział Moduły / Produkty został podzielony na podkategorie, więc od teraz proszę o zakładanie tematów w odpowiednich działach.   Poprzednie tematy będą stopniowo przenoszone do odpowiednich kategorii.    Pozdrawiamy, Zespół FIBARO
    • I.Srodka

      New Forum Structure   01/04/18

      Dear Forum Users!   As you can see, some changes in Forum structure has been made and we are going to reorganize even further.   From now on, Modules / Products has been divided into subcategories (particular devices), so please create new topics in the corresponding subcategories.   We will address previously created topics in Modules and we will be moving them on a daily basis.   Kind regards, FIBARO Team
    • T.Konopka

      DOWNLOADS - new way of sharing solutions!   01/17/18

      Dear users, We want you to have a great time here on the Forum, therefore, we are introducing a new tool for sharing solutions! DOWNLOADS - a system of file sharing for all of you. DOWNLOADS - support topics - this is a new category for support topics. Check the short guide for Downloads on how to add a solution (all files have to be approved).   Crowd's Solutions will be closed for new submissions, but still open for replies in remaining topics. We ask the authors of the solutions to add their solutions to Downloads with the link to the topic at the top of the description. We will merge the support topic with the one from Crowd's Solutions.   If you have any questions, feel free to ask our administrators - @T.Konopka and @I.Srodka!
    • T.Konopka

      DOWNLOADS - nowy sposób dzielenia się rozwiązaniami!   01/17/18

      Szanowni użytkownicy, Chcemy, abyście świetnie spędzali czas na Forum, dlatego przedstawiamy wam nowe narzędzie do dzielenia się rozwiązaniami! DOWNLOADS - system dodawania i pobierania plików. DOWNLOADS - support topics - to jest nowa kategoria z tematami wsparcia. Sprawdźcie przewodnik dla Downloads, aby wiedzieć jak dodać rozwiązanie (wszystkie pliki muszą zostać zatwierdzone).   Rozwiązania Społeczności zostaną zamknięte dla nowych tematów, jednak tematy już wczęśniej dodane będą nadal dostępne. Prosimy autorów rozwiązań do przenoszenia ich do Downloads - prosimy o dodanie linkiem do tematu na górze opisu. Połączymy wtedy temat wsparcia z tematem z Rozwiązań Społeczności.   W przypadku pytań, prosimy o kontaktowanie się z administratorami - @T.Konopka and @I.Srodka. (Rozwiązania mogą być dodawane w języku polskim!)
  • 0
Sign in to follow this  
kickonhigh

heating panel issue

Question

hello,

I have an issue or maybe it is just lack of knowledge :) , so please let me know .

In one section I have two rooms ( section called first floor, rooms called room1 and room2 ) and one source heating connected to wall plug ( an electric heater) .

So I create linked device for

room 1 - temperature sensor  + wall plug

room2 - temperature sensor2 + wall plug

and also created zones in heating panel , one for each room with other configuration of temperature, and first room is ok but when second room start heating but only for a while becasue temperature in room1 is reached ... please support some how or give some hints :)

 

And another question regarding fibaro thermostatic head , I have it with temperature sensor , when I set manually  radiator on blue (16 C ) and when temperature on sensor is reaching higher than 16 C  , shouldn't  it close valve ?

Edited by kickonhigh

Share this post


Link to post
Share on other sites

1 answer to this question

Recommended Posts

  • 0

Hi @kickonhigh!

 

You have a little problem with logic linking here.

 

You have a zone. That's ok. Then you have two rooms with two different sensors but with one actor, one wall plug, one heating source.

 

If you linked sensor1 and sensor2 with the same actor, the communication may be different than you would expect. Two sensors will be sending commands to one actor. There may be a moment when sensor 1 will say "enough" but sensor 2 will still be not warm enough. 

 

You can join them via scene.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×