I am having installation issues. I already have about 7 Fibaro Dimmer 2s ("the appliance") installed, but this one has me stymied. I have 3 wires in this wire box. I tested the wiring with a simple on/off switch and this works as does the bulb. Just a heads up, I do not know what the third wire does but it does seem important. I followed the instructions on page 9. When I returned the power to the appliance, for a split second the light goes on and the Dimmer displays a green light. Immediately after the light goes dark and the appliance goes to a solid red and stays there. I attempted the various calibrations (especially blue, but also red, white, green, violet and yellow). All pause for a bit and return to solid read.
The appliance does broadcast and I have integrated it into my Openhab system. In that system I can turn it on, but at whatever percent, it jumps to 6% only or turns off.
I have attempted to changes the wires but the appliance is dark in all other configurations. I can get the light on by placing a wire connecting Sx to N (keeping the rest of the configuration the same), but the appliance stays dark. I also have another unused appliance and I attempted to attach it in place of this one, with the same issue, so it is something with the configuration.
Any ideas?