Welcome to Smart Home Forum by FIBARO
Search the Community
Showing results for tags '4.10 door sensors'.
hi all, This is my first post on the forum SO HI!! We're hoping someone else is experiencing the same issues. Fibaro has been running very well for the last 18-24 months then this, it comprises of a gradually built system with the following HC2 and 30+ fibaro modules (doors, motion, flood, Smoke, rgbw, dimmer 1 and 2s, relays. almost the whole suite) and 4 older aeon lab relays that were laying around. I got some bizarre problems with 4.08 - 4.10 upgrades in that motion sensors stopped working, scripts changed doors from breached to armed, scenes stopped working altogether that worked fine for over a year, door sensors stopped working and loads of other issues. i thought it was because of lots of tinkering over the course of that time; so decided to restore and start fresh. I firstly installed all latest firmware 4.100 before adding any modules. Things got weird door sensors wouldn't work and toggling between awake, update ok, awake, update ok for hours gave up and took out the batteries after 4hrs removed batteries and rebooted reset and re-added nothing changed motion sensors ran like strobes and didn't work at all in scenes inspected all their parameters and most were nothing like default replaced the settings to what they are meant to be and they just won't take the new settings. Only wake for 1-2 seconds only then back to disco mode aeon labs relays that worked in 4.08. They add in and show that they work in the app/browser but don't respond at all (lights stay off) scenes don't work with variables the list goes on............. What took originally a few hours to redo a year ago i ended up wasting 12+ hours yesterday investigating all i could Today i decided again to do a fresh install buy installing modules that had issues in 4.100 straight into 3.600 (basically battery operated Motions, Flood, Smoke and door reeds, PLUS the 4 Aeon labs relays). Made sure EVERYTHING was removed on the previous install of 4.100, eprom reset every module and then recovered to V3.600 They all work fine! WOOOHOOO i'm getting somewhere..... then Updated to V4.100 and all aeon lab modules doing exactly the same ARGGGGGGGGGGGGGHHHHHHHH and most battery devices gone from the interface and doing crazy stuff again when removed and then re-added I'm hoping i'm not alone here but this is the 3rd attempt with no luck. It's that bad that the whole automation system is disabled plus all batteries removed (over the disco) and we're just using it as a normal lighting system with button dimmers:( IS THERE ANYWAY of restoring and upgrading to V4.08 only? PLEASE HELP Thanks in advance for any assistance Regards Szymon