Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,


as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.


As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!



Smart Home Forum by FIBARO Team

Search the Community

Showing results for tags 'rgbw'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


  • FIBARO Community
    • FIBARO Portal and Forum policy
    • FIBARO
    • Say hello!
    • Off-topics
  • FIBARO Update
    • FIBARO System Update
    • FIBARO Mobile Update
  • FIBARO Community Support
    • Scenes and Interface
    • FIBARO Products
    • FIBARO Mobile
    • FIBARO HomeKit
    • FIBARO Assistant Integrations
    • Other Devices / Third-party devices
    • Tutorials and Guides
    • Home Automation
    • Suggestions
  • FIBARO Społeczność
    • FIBARO
    • Przywitaj się!
    • Off-topic
  • FIBARO Aktualizacja
    • FIBARO System Aktualizacja
    • FIBARO Mobile Aktualizacja
  • FIBARO Wsparcie Społeczności
    • Sceny i Interfejs
    • FIBARO Urządzenia
    • FIBARO Mobilnie
    • FIBARO HomeKit
    • Integracja z Amazon Alexa i Google Home
    • Urządzenia Firm Trzecich
    • Poradniki
    • Automatyka Domowa
    • Sugestie


  • Scenes
  • Virtual Devices
  • Quick Apps
  • Icons

Find results in...

Find results that contain...

Date Created

  • Start


Last Updated

  • Start


Filter by number of...


  • Start






Website URL





  1. Hi. All my RGBW controllers are mounted on wood, as close as possible to LED strips, not in wall-boxes! For easier connection and some kind of cable management, I created a 3d printable mount for the Fibaro RGBW controllers. It takes countersunk screws (usually 2 are enough) It prints nicely , with some support under the lip that clamps the controller. With Prusa slicer I used "support enforcer" and it prints in ~45minutes. Feel free to use it FIBARO RGBW Mount v2.stl Best regards from Namibia Jürgen
  2. Hi, I'm new to LUA but I am trying to read the current value of R and assign it to B. I basically have 2 white strips and 2 sets of downlights, assigned to the RGBW channels. I want the 2 sets of strips to copy each other and the 2 sets of downlights to copy each other, so if I dim one strip, it mimicks on the other strip and if I dim one set of downlights it mimicks on the other set of downlights. So I want to read the current value of R and assign it to B and read the current state of G and assign it to W. Thanks in advance!
  3. We have a strange situation with several RGBW (2) controllers. Customer has around 10 of those modules. Most are RGBW controller, on the latest firmware, and parameter to disable associations is on. 3 of them are RGBW2 controllers. Now, client has several scenes to change the color of the RGBW modules. This works sometimes, but on other moments when the scene is started, the LED get a completely different colour. We had this behavior when client was on HC2, we migrated to HC3 and the same thing happens So, what options do we have?
  4. Configuration: - RGBW led strip connected to RGBW 2 controller + monostable (GIRA) wall switch - HC3 - Fibaro iOS mobile app System by default use "white" colour through mixing only RGB channel from RGBW led strip and white (W) chanell is not use (turned off) . If you want to use white colour from your RGBW led strip you have to define white colour ( #000000) by yourself in fibaro web application. All is fine if you are use such a configuration and use only wall switch. When you changed led colour (i.e. yellow, magenta, blue, green or whatever) through mobile application you will not be able turn on/off led light with your wall switch. It doesn't work any reaction from led strip To "fix" this issue you have to login to web application and choose once again earlier defined white colour ( #000000). Have you ever meet such a problem/bug ? Thank you
  5. I have 2 RGBW modules which are in the kitchen and are on firmware 22.22. I get notified that new firmware is available. However, every time I try to update it, it comes back after a minute or so saying Update Interrupted - device connection lost. try again. Now as the relays are in a different room, how do I get this to update as I can't remove the relays and bring them closer to the HC2 nor can I move the HC2 to closer to the relays. Is there a way around this or do I have to just accept the fact that the distance betweent the 2 will always prevent the update from succeding??
  6. Hello everyone. I am really considering to move on fibaro eco system but i have some thinks i want to resolve first. For start i have to say that my configuration until now in my home was mainly at Apple Homekit eco system and Hue lights. I thought to move on fibaro system only because it combines as the advertisment say everything at least the hue that matters for me. SO i went and buy a HC lite to start building my system with my Hue lights, for the first hour i was trying to set my hue lights as Lights on fibaro app but that wasn't possible because as i figure out the compatibility they say it has it's only as devices and not as lights. And because all the above i don't want to go out and buy 7 dimmers and a couple of switches i need and then figure out that it's not compatible with my lights. The tricky part is that i have my main led strip that is about 25meters and another two lights source about 10 meters that i want to control via fibaro. As you can see in the pictures i know use Dimmers from Vimar to control my lights but i am going to replace them with vimar simple switch so i can make thinks less complicated. My question is there possible to use fibaro dimmer two dim that kind of lighting ?? Thanks in first place !
  7. knuth


    Task: To control one channel on the RGBW controller/dimmer remotely through a double momentary switch (using S2) on the Dimmer 2. Solution, and some questions: Install the RGBW unit and its load, add it to the HC2 and assign its outputs. In my case, all 4 are "input/output" to control separate monocolor LED strips. Install the Dimmer 2 and its load and add it to the HC2 Select the master module of the Dimmer 2. Go to Advanced - Associations Select the 5th Association group ("Dimmer on S2"), since the RGBW we want to control is a dimmer, not an on/off function Check the box in the M column for the appropriate RGBW channel and click Save. First question: Group 5 is specifically for a multilevel switch, e.g. a dimmer. Why is there even an S box available for this group? Should it ever be used? Second question: There is a box for the HC2 at the top of the Associations list. What is the effect of ticking this box? Should the HC2 normally be ticked in the M column as well? Third question: I have seen a screen dump somewhere for a similar case. Here, the Dimmer itself was ticked in the associations list. I have avoided this, as it does not seem logical to include an association from a unit to itself. Any views? Fourth question: I assume that using Group 5 transfers all the normal switch commands: Single click for on/off, click and hold to dim up or down, double click for full light. Correct? Fifth question: In step 3 above, would it be possible (or even preferable) to select the slave unit used to operate the dimmer function instead? The reason I ask these questions, is that I have successfully followed the 6 steps above, with slight variations, and get variable results. Some units seem to work seamlessly, others are a little erratic (no response on single click, hard to control dimming function etc.). The 'slight variations' are in the way I did the associations, and are related to some of my questions. If anybody can provide suggested answers, I can focus on any remaining issues.
  8. Hi All, I have a LED (single colour white) LED strip controlled by an RGBW module. It doesn't have a physical button, instead its controlled via association (s2 from a dimmer 2) Its been working perfectly for ages. I recently updated the firmware on the RGBW and now it always switches on at 1%. If I double press the s2 on dimmer 2 it switches the RGBW to 100% but I really need it to just remember its last state. Has anyone got an idea? Cheers tom
  9. Jak w temacie - jeden z modułów RGBW nie raportuje zużycia energii. Jest to jedyne zastrzeżenie do jego pracy, gdyż wszystkie inne funkcje są realizowane prawidłowo. Mam też zainstalowany drugi moduł RGBW sparametryzowany w ten sam sposób i tu problemów nie ma. Miękka rekonfiguracja urządzenie nie pomogła. Twardej rekonfiguracji wolałbym uniknąć z uwagi na dużą ilość scen w których ów moduł jest uwzględniany. Wersja oprogramowania: HC2 4.056, moduł RGBW - FGRGBW 441M EU WERSJA 25
  10. Hi A small solution to making tunable white lighting in Fibaro. Might help someone who is new to Lua and Fibaro https://youtu.be/atihFhlgTAc The video description has the link to virtual device.
  11. Hi, I just installed an RGBW 2 Controller. Two white stripes are connected to the "R" channel and the "G" Channel. Using the HC2s Interface I can turn both stripes on and off independently by using the sliders for Red and Green. So far, so good. Now I would like to use them in a scene. For starters, I created a scene using a Motion Sensor as triggering device Motion == Breached Then Light = Turn On And Light = Set G 255 If I preset the G value to 255 in the interface and simply use the "Turn On" function, it works. But since I would like to switch both strips independently, this won´t work for me. The "Turn On" part is working, I can see it turning on in the Interface and then turning off, after the "breach" has worn off. So the problem seems to be with the "Set G" part. Can someone help me out? Regards, D4RK1
  12. knuth

    RGBW update

    I have three RGBW controllers. Two of them have been successfully updated to firmware version 27.27. The third refuses to do so. Download of the new version 27.27 is OK, but about half way through the installation it fails: Status: fail - update interrupted - device connection lost. try again.. This happens consistently, in spite of the fact that this controller is installed less than a meter away from the HC2. It may or may not be relevant, but I noticed today that during the update, the following message kept coming up: The last two lines were repeated every 4-5 seconds for several minutes: "set parameter 43, value = 0", and then "Received parameter 43 report, value = 5". My actual value for parameter 43 is the default value of 0.5 V. Why is this parameter changed during the firmware update? My current fw version on this controller is 25.25
  13. Hi everyone, I have a few Dimmer 2s (FGD212) and an RGBW (FGRGBWM-441). One Dimmer 2 is wired up (3-wire install) to a double switch. S1 controls the wired light. S2 is also connected. The dimmer works from my app for the single light just fine. If I set S2 to control another Dimmer 2 via association group 4, it works perfectly. If I try to set S2 to control the RGBW via association group 4 or 5, nothing happens. Has anybody achieved this? If so, what am I missing? I'm very grateful for any help the community can provide. I am using a Samsung SmartThings hub, not HCL. I will ask the question in their forum too. Thanks for your time. JDB
  14. I'm looking to upgrade my garden irrigation system and integrate it into my HC2. My current system uses 24v DC powered solenoid valves which are triggered via opto-coupled relays with a coil voltage between 5-15v DC. I want to control up to eight zoned valves from the HC2 web interface through schedules and interface switches (simular to how a light would be switched on/off but showing irrigation icons) Can I / should I use a Fibaro RGBW Controller?, or can I use the Fibaro Universal Sensor? (I'm not sure I can switch the two outputs of the UBS from within the HC2 interface though?) Thank you for any advice / recommendations in advance....
  15. I use my RGBWs in input/output mode, specifically to control monocolor LED strips in separate rooms. One room is on the "R" channel, the next on the "G" etc. This mostly works OK. For one of the units I have recently noticed that when the lights are turned on in room 1, the LED strip in room 2 starts glowing ever so faintly. If the LED in room 1 is switched off, the glow goes away. There seems to be insufficient separation between channels, giving a small output on neighboring channels when one channel is in use. The dim level of room 1 is irrelevant - the glow in room 2 is there whenever the room 1 LED is switched on. Another possibly unrelated problem: This particular RGBW controller is on firmware version 25.25. The current version is 26.25, but I have not been able to update it. The new version starts loading, but always stalls at about 50 % progress and then aborts: "Lost connection". Which is strange, as this RGBW unit is the one located closest to the HC2, less than a meter away from it. I have been able to update my other two controllers, located further away, to version 26 using only one or a few attempts. I don't expect the fw version to play a role in the problem described above. This seems more like a hardware problem. Has anyone experienced something similar? Those of you using the RGBW controller for color control, would not notice. A slight glow of one color when another is activated would not be visible. But those of you using it as a multichannel dimmer could test for the effect I have described. Do you see the same glow?
  16. Does anybody know of RGBW colour picker wall switches that are compatible with the ZWave modules such as the Fibaro RGBW module ? Something that replaces a standard wall light switch form factor, like this (which is a controller all in one) At present with the Fibaro RGBW modules controlling the ceiling lights -- they don't get used as much as they could do as nobody can be arsed to get an iPad or phone out of their pocket and fiddle with the colours other than myself!
  17. Is it possible the read out the set of favorite colors for RGBW modules in LUA? How? I want to cycle the favorite colors in a scene. Thanks for hints.
  18. I have three RGBW controllers, all operating in input/output mode. Having successfully configured all three, I notice two puzzling facts: 1. All units are configured with one master and six slaves. For two of them, these are numbered from xxx.0 to xxx.5. For one, however, the first slave is numbered xxx.0.1, not xxx.0. 2. I want to "hide" all units except the four output channels (xxx.2 to xxx.5) The first slave unit (xxx.0 or xxx.0.1), however, refuses to save the check mark in the box "This device is hidden in the system". I can tick the box, but after Save the box remains un-ticked. There is no error message. If you have an RGBW controller, please share your observations on either of these issues. You don't have to provide an explanation or solution, just share what you see on your units. Note: The firmware version is 25.25 on two of my units. One was recently updated to 26.0 without affecting the two problems above.
  19. Has anyone ever connected a 0-10V controller to the RGBW module? Here's the problem that I am facing: I have connected a LED strip to the 0-10V controller which is connected to one of the channels of the RGBW module, say White. The dimming of the strips works great except one issue, it works in the opposite manner. It means that the LED strip goes to 100% brightness when I turn it OFF from the interface and when I turn it to maximum brightness the LED goes OFF. I have even checked the voltages from the RGBW module. It gives +10v when I turn it OFF from the interface and gives 0v when the slider is set to maximum brightness. I have got same results on other RGBW modules too. But, I was able to work around a solution on the HC2 using VD & LUA. But, I can't figure what I am doing wrong. Is there any way to fix this issue on HCL?
  20. I find the descriptions of the parameters for the RGBW Controller to be a little confusing. I need your help to clarify, please. I use the RGBW in input/output mode, to control 3 - 4 individual (monochrome) LED strips, each channel behaving like a dimmer. I need to set the parameters right for this application. Parameter 1, All On/All Off: Is this relevant for my i/o-mode application? I assume 0 (inactive) is appropriate, not the default value 255 (active)? Parameter 8, Output state change mode: Default is 0 = "mode 1", which seems appropriate in my case. Correct? Parameter 14, Input/output configuration: This is labelled "relevant for controllers other than HC2". I have the HC2, does that mean that the configuration of the input/output settings screen overrides this parameter? Otherwise, the default value of 4369 = "RGBW toggle switch" is clearly not my choice, as i have a momentary switch with dimmer output. Any other parameter I should pay attention to?
  21. Hi all, like some other people here in the forum I also can’t get IN/OUT mode of my new FIBARO RGBW Controller (FGRGBWM-441, Firmware 25.25) working. What I try to achieve is to measure the value of IN1 to calculate soil irrigation and ground temperature on IN2 delivered from a truebner SMT50 for my garden irrigation out of that. Here the relevant parts of the manual of SMT50. I try all of this within my smart home system based on openHAB; NOT using the Home Center gateway. In openHAB I set Parameter 14 to 34833 (0x8811) because of „IN - ANALOG 0-10V (SENSOR)“ on IN1 and IN2 and IN3, IN4 not connected. And I would expect the returned corresponding voltage of soil moisture on R and of ground temperature on G now. But nothing! Both channels don't deliver any value. Both, the SMT50 and the RGBW Controller are feed by 24 V. When I measure the returned voltage of soil irrigation with a multimeter while the cable from the sensor is NOT placed in IN1, 0.8 Volts are returned. Placing the cable in IN1 and measuring again, 4.4 volts are returned! Is that because of the effects shown up here? If yes what must I do in my special case? But the most interesting question: Why is R (and G) returned as 0? I would expect at least 4.4 V there, even if this value is wrong, because it should be 0.8? What am I doing wrong? Could anyone please help me with that.
  22. Good morning, I have a heating floor system at home and I have installed sensors of temperature in every room. I regulate the opening and closing of the heating circuits with electrovalves that are controlled with a RGBW Fibaro device: each of the four channels opens one of these electric valves that open the heating circuit. In the advanced configuration settings, I have categorized the "controlled device" for this RGBW device as "other device". When trying to link the room temperature sensor with this RGBW device that controls 4 heating circuits, I can´t do it because the do not appear as available on the dropdown menu of the "controlled switch" field, because I am using a RGBW device instead of a relay... Is there a way to solve this issue so I can make the RGBW lines available as switches to be linked to the temerature sensors. Thanks. Jaime.
  23. Hi everybody ! Connect rgb controller to rgb strip everything working fine till i add my own program like lpd or aurora.program dont want work,cant find reason why, even when I edit lpd for example and just save in different name still dont want to work.I can bet it is something silly but, think need help in this
  24. Hi, I have purchased a Fibaro HC2 with several devices, including Fibaro dimmers (FGD-212) and Fibaro RGBW controllers (FGRGBWM-441) for LED strips. I wish to use these in a home installation, where one of the goals is to try to achieve basic functionality via manual switches, using HC2 mainly for enabling scenes. For each of the dimmers connected to the main lighting, I intend to use two momentary switches, where one switch increases brightness and one decreases it. I understand that this can be achieved by setting parameter 20 (switch type) to 2 ("roller blind switch"). I intend to use RGBW controllers in two cases: 1) One controller driving an RGBW LED strip, with two momentary switch inputs 2) One controller driving two CCT (dual white) LED strips, with two momentary switch inputs For LED control I would like to achieve similar switch control behaviour to the dimmers: One momentary switch increases brightness of all output channels One momentary switch decreases brightness of all output channels HC2 can override current output settings to set RGBW values when a scene is activated. In this case I would like to be able to set each RGBW channel independently. For the CCT case, I would like the same behaviour, as the only difference is what the output channels represent. I am happy for the switches to control the brightness of both CCT strips together, but I would like to be able to use HC2 scenes to set the brightness of each channel independently, thus providing independent control of the white tones and strips in scenes. I have studied the manual for the RGBW controller and it's not clear to me whether it is possible to achieve what I want. The "brightness" setting seems to allow all channels to be controlled together from a momentary switch, but it doesn't look as if I can dedicate separate momentary switches to increase or decrease brightness. It is not obvious to me from the manual how the brightness setting works with a single momentary switch. Can anyone advise me whether this is possible, please? If not, can anyone suggest an similar alternative configuration that is possible? Many thanks, Jim
  • Create New...