Welcome to Smart Home Forum by FIBARO
Search the Community
Showing results for tags 'toggle-switch'.
Hi, I have an issue with RGBW2 ( 442 ) and Toggle switch installation with HC3 Home Center. I use just White LED strip this case I adjusted the parameter Nr. 150 from 0 to 1 ( HSB and White mode ). Also I modified the parameter Nr.23 from 2 to 4 ( Toggle switch just ON/OFF ). I use Input4 for the Toggle switch and OUT4 for the LED strip. The problem is when I switch with the Toggle switch the in the application the "Power Switch" ( icon ) dosn't change. 1, If in the application the "Power Switch" is on than the LED lighting. I can switch OFF with the Toggleswitch but in the application the "Power Switch" still reemain in the ON position. In this variant I can ON/OFF with the togglr switch without any problem. 2, If I switched off the LED strip in the application with the "Power Switch" ( push the icom ) and afte I want to switch ON by Toggle switch it is impossible. The LED strip and the application icon ( Power Switch ) dosn't react of any position for the toogle switch. If anybody use HC3/HC3 Lite with RGBW2 and Toggle switch can share to me what is the correct parameter adjustment ? I want to use Toggle switch just for ON/OFF the LED strip without adjust the Brightness. Brightness will be adjust just in the application. Thank you.
Hello, I intend to use a Fibaro module FRG-222 to control a roller shutter powered with a Somfy LT50, together with a Somfy bi-stable fixed position switch (3 buttons : "up", "down", and "stop") as the manual says it is possible with config key 14 set to "1". I wonder how the logical control of the module work together with the physical positioning of the toggle switch. If for instance the "down" button of the switch get depressed (staying in that depressed position, the shutter goes down) and latter the module receives an "up" order from the zwave network, isn't there conflict between the two ? The shutter going in the "up" position when the controlling switch has its "down" button still depressed. What happen next, if I want to get the shutter "down" from the button which is already depressed ?... Can someone explain to me the principle of this working ?