Welcome to Smart Home Forum by FIBARO
as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.
As a member you can:
- Start new topics and reply to others
- Follow topics and users to get email updates
- Get your own profile page and make new friends
- Send personal messages
- ... and learn a lot about our system!
Smart Home Forum by FIBARO Team
Search the Community
Showing results for tags 'window'.
Found 9 results
prevent the roller shutter from coming down if the window is open
paolo posted a question in Scenes and Interfacehow can i prevent the roller shutter from coming down if the window is open? I have the following scene but if the shutter is activated by the app it goes down anyway. I would like the opening of the window to completely block all operations on the shutter. Thanks --[[ %% properties 123 sceneActivation 123 value %% globals --]] open = fibaro:getValue(472, "value"); fibaro:debug(open); local startSource = fibaro:getSourceTrigger(); if ( tonumber(fibaro:getValue(472, "value")) > 0 ) then fibaro:call(123, "open"); end
Closed status of Fibaro Door/Window sensor delayed
Twannie posted a question in Door/Window SensorHi I have strange behavior of door windows sensors from Fibaro, with both old and V2 versions When opening a door and then closing it within about upto 30 seconds or so the "closed" status is received with a 10 seconds delay by the HC2 So the door sensor shows "closed" in the HC2 interface exactly 10 seconds after closing and scenes triggered run accordingly. Open status is always, always received without delay!!!! I have a HC2 with 95 physical sensors, zwave traffic is on average each 6.5 seconds (zwave monitor) Can some one help me with this? I am stuck
Door and window monitoring
745 downloadsScene description: The script reads the temperature of an outdoor sensor to extend or shorten the message interval. The status of windows and doors is checked every minute. The shortest reporting interval ist 5 minutes. It's also possible to use the temperature of a plugin like Yahoo or Yr Weather. In this case, the variable has to look like this:
Motion sensor, szybka zmiana temperatury- reakcja
Gregory posted a question in Sceny i Interfejs
Change tampered status of Door/Window sensor
leotoni posted a topic in FIBARO HomeKitI have four door/window sensors that work with Apple HomeKit. I have had to replace the batteries on all of them. Now they all show as “Tampered” on the Home app. How can I change the tampering status from “Yes” back to “No?” Thanks!
DW Sensor HomeKit - Very poor battery life
leotoni posted a topic in FIBARO HomeKitI have four door/window sensors compatible with HomeKit. Each consumes a brand new battery every three months or so. Is this right? For some reason, I have been under the impression that the battery should last over one year.
Strange behaviour of door/windows sensor
Bodyart posted a topic in FIBARO Products
Door and window check before arming
jimicr posted a question in Scenes and Interface@matt1981, Here you go This one checks when arming while home, in my signature you'll find the arm scene I use. I have more door and window check scenes that I'll post when finished (like for the netherlands a rain alert and a reminder if there is a door left open by the kids or you forgot to close the garage door) *Edit* removed my mistake, thanks @Sankotronic for pointing this out checkdoorwinhome v01.lua
Ibie posted a question in Roller Shutter 2Hi there Forum-peoples… Here’s my post on Window Automation using chain- and spindle actuators with an Roller shutter 2 module from Fibaro… Sure this is already done, but I think I found an way for easy hardware install and payable solution. An other reason is that i dint find a sollution within the Zwave products range that can open a roof dome up to 30cm or higher. First off all, something about me… I am an newbie in the Zwave (or so with Fibaro) world. I am learning by Trial on Error… The little things I know I learned in this forum and I follow @Sankotronic’s post mainly. Please keep in mind I am new to this, so always pick your own brain for your own solution you need for your house… I can only give you guys a head start or a burned down house. I needed a solution for my roof domes and for my bedroom top windows. So here is how I did it: You need the following: - The right motor for your window - A regular Roller shutter wall switch (not automated) - Some electric cabling - A Roller shutter 2 module from Fibaro - A piece of wood to bite on when you get frustrated (so your wife won’t hear you scream) - The Power of @Sankotronic VD and Scenes Choosing the motor: There are a few things you might wane consider before buying the most expensive thing for this project. - How much space do you have to screw on and place the motor. For my solution I always want to have a mosquito-net available. I build an extra wooden frame around my bedroom window to get it fitted. - How far do you want to have the windows opened? I personally (by Trial on Error) think that 30 cm will do for the roof domes. If you want more cm, then the motor you will need might be bigger and wont fit. - How much Newton power will you need. On the website I will give you, there is a calculation table you can use, about the Newton power you will need. But I think about 250N to 450N will be enough. The more Newton the more you pay. Also lookout that the Power of the motor wont crush your window (my rooftop is from the material PVC) - Take a motor with an in build auto stop! I think you need this to get it to work with the Roller Shutter 2 Module of Fibaro. You need to adjust a parameter (will discuss this later). - Take a good look at the currents you need for your country. For easy installation I went for 230V motors (and not the 12V versions). They could be directly connected to the Roller shutter 2 module of Fibaro. - Which type of motor do you need (Chain- or Spindle Actuator) I tried the Chain actuator first for my roof dome. But as it needs to open up to 30 cm the chain starts to hang to the right. So when wind blows there may be some sounds coming from the movement of the chain. I didn’t want this. If you only want to open an window for 15 cm then the chain version will work fine. A spindle actuator needs more space for placing. But I think a spindle actuator is ideal for Roof domes. For a top windows you want to go for a chain actuator. Else you don’t have the space for a mosquito net. Take a look at this website: http://www.windowo.eu/window_automation The company is in Italy.. At first I didn’t trust this website, because they have a few mistakes on it (like the VAT: it says its included but its not) I tested the website by beginning to buy 1 motor first. The delivery took about 2 to 4 weeks to the Netherlands. Then again they are so cheap its unbelievable… For my Roof dome I bought the: Spindle Actuator Raywin R45 450N 230V 50 Hz Comunello Mowin Raywin R45 - stroke (mm): 235-300 mm 2 motors for 261 euro (incl Vat and shipment) For the bedroom Top Window I bought the: Liwin L35 Chain Actuator 230V 50 Hz L=<1250 Comunello Mowin Comunello color choice: White 2 motors for 169 euro (incl Vat and shipment) I can adjust the max stroke with a dipswitch setting on the motors (Chain and Spindle) Choosing a Wall switch (no automation): I bought a standard roller shutter wall switch. With this switch you can’t push accidentally up and down at the same time… Not sure if it is important, but I went for this solution. So if your HC2 isn’t working you still can close your windows. Choosing a Zwave module: I went for the Roller Shutter 2 module from Fibaro. Yes indeed, you need some space in your walling to connect all cables, the wall switch and the Fibaro module… So keep that in mind for where you want to place the switch’s. I have two rooftop windows and two bedroom top windows… Yes you can connect all four windows to one Roller shutter 2 module of Fibaro (as long you don’t exceed the power levels of the module). But I need a different scene for my rooftop window (must close quicker when rain or wind) then for my bedroom top windows… So I decided to buy 2 Roller shutters… General tip: Buy only one thing of each item you need and make a test environment. Also test first and then place it. Connecting it all: Ok here you need to pick your own brain, if you cant then don’t start this project yourself. Get a friend to help you with the electricity etc. In generally you can directly connect the cable’s from the motor for up and down to the Roller Shutter 2 Module of Fibaro Q1 and Q2. Use S1 and S2 for your wall switch. Installing the Roller Shutter 2 Module from Fibaro: For me this was the most difficult part. If you won’t succeed at first, don’t give up (I almost did) Connect/install the Roller Shutter to your Fibaro. I hope you have first made a test environment to setup your first motor. You need to calibrate it for Max open and close. This took me some time and I found it easier to test it all, so I wouldn’t have to run across the whole house. On the “Advance-tab” of your Device under topic “Advanced” you need to put the “Controlled Device:” to “Blinds with positioning active” Parameter 18: Here starts your Trial on Error and you need that piece of wood I mentioned in the beginning and place it between your teeth… I have set my Chain actuator to 3 Watt for parameter 18. If you don’t change this setting it will not work. You now have to press Calibration button (almost back on top off page). If the Chain doesn’t go all the way up or down, adjust the amount of Watt. I noticed that while going Up or Down, the Roller Shutter 2 module of Fibaro needs to detect an amount of power. So it knows if the motor is on its top or bottom. This is also why you need to buy an Motor that has its own Auto Stop. So when the motor has power, the roller shutter module senses it and gives it current until the motor stops and doesn’t consume power. For my Spindle actuator it didn’t work with only adjusting Parameter 18. They are different motors so I had set this Parameter 18 to 6Watt. But still it didn’t always worked. Then I found that I also needed to adjust parameter 17. I set this parameter to 5.2 seconds. I think this is the time it waits when last minimal current was measured… So playing with Parameter 17 and 18 was my biggest struggle. Scenes Now you have created your devices, you need a scene… Again as a newbie I just created something that works for me. It has no clean code (error checking etc). I hope that @Sankotronic or others will use my solution so I can get a proper Scene in the future. Because I have Netatmo weather station I can use the CO2 lvl for automatic opening. Handy if you have visitors. It might also first check if the windows shouldn’t be opened in case of wind and rain. One other thing I like about window automation is that with an simple code you can at it to your smoke alarm, opening windows when smoke is detected so you get the change to run out of your house without to many smoke in your way. Even now you got use for the Netatmo Noise sensor. It can help you close your bedroom window when noice is detected. Not hard to code but I have no need for this now. For now I only created a scene for automatic closing, when it rains or when the wind gusts are too high. I did this for the wind and rain separately. I use an Netatmo Wind- and rainsensor. You will need the power of @Sanktronic [VD] Weather State v2.0 and [SCENE+VD] Netatmo weather station v2.0 - to get the weather information. Main scene for time based events v1.2.5 - for the scene’s to start. WindRoofDomeClose - Scene: When Windgust are to high i need them to close automaticly. --[[ %% properties %% events %% globals --]] -- setting up variables wT = json.decode(fibaro:getGlobalValue("WeatherState")) local stationNo = 1 local guststrenght = wT.netatmo[stationNo].wind.gust; local idroofdomes = tonumber(fibaro:getGlobalValue("IDRoofDomes")); -- IDRoofDomes is ID of my RolleshutterModule local idgsmibie = tonumber(fibaro:getGlobalValue("IdGsmIbie")); -- ID of my mobile phone local roofdomesstate = tonumber(fibaro:getValue(idroofdomes,"value")); -- Open or Close state if roofdomesstate > tonumber "0" and guststrenght >= tonumber "75" -- here i can adjust the Wind gust strength for Closing then -- Sending message to my phone fibaro:call(idgsmibie, "sendDefinedPushNotification", "183") -- 183 is the ID for my message created in the Notification panel -- Close window fibaro:call(idroofdomes, "setValue", "0") end RainRoofDomeClose - Scene: This script is checking the weather on http://openweathermap.org/ As a test I also added a check for my Netatmo Rainsensor. If Internet would be down, it works as a sort of fail save… Floors will be wet because it will take at least 15 min. to close. But rather 15 mins then hours of rain in my home when I am asleep in summer. --[[ %% properties %% events %% globals --]] -- setting up variables wT = json.decode(fibaro:getGlobalValue("WeatherState")) local stationNo = 1 local weathercastid = wT.openmap[stationNo].w_id; -- Weathercast ID local netatmorainsensor = wT.netatmo[stationNo].rain.hour; -- Netatmo rain/hour local idroofdomes = tonumber(fibaro:getGlobalValue("IDRoofDomes")); -- IDRoofDomes is ID of my RolleshutterModule local idgsmibie = tonumber(fibaro:getGlobalValue("IdGsmIbie")); -- ID of my mobile phone local roofdomesstate = tonumber(fibaro:getValue(idroofdomes,"value")); -- Open or Close state if roofdomesstate > tonumber "0" and -- rain detection from http://openweathermap.org/ ( (weathercastid == tonumber("200")) or (weathercastid == tonumber("201")) or (weathercastid == tonumber("202")) or (weathercastid == tonumber("210")) or (weathercastid == tonumber("211")) or (weathercastid == tonumber("212")) or (weathercastid == tonumber("221")) or (weathercastid == tonumber("230")) or (weathercastid == tonumber("231")) or (weathercastid == tonumber("232")) or (weathercastid == tonumber("300")) or (weathercastid == tonumber("301")) or (weathercastid == tonumber("302")) or (weathercastid == tonumber("310")) or (weathercastid == tonumber("311")) or (weathercastid == tonumber("312")) or (weathercastid == tonumber("313")) or (weathercastid == tonumber("314")) or (weathercastid == tonumber("321")) or (weathercastid == tonumber("500")) or (weathercastid == tonumber("501")) or (weathercastid == tonumber("531")) or (weathercastid == tonumber("502")) or (weathercastid == tonumber("503")) or (weathercastid == tonumber("504")) or (weathercastid == tonumber("511")) or (weathercastid == tonumber("520")) or (weathercastid == tonumber("521")) or (weathercastid == tonumber("522")) -- rain detection from Netatmo Rain Sensor or netatmorainsensor > tonumber "0" ) then -- Sending message to my phone fibaro:call(idgsmibie, "sendDefinedPushNotification", "186") -- 186 is the ID for my message created in the Notification panel -- Close Windows fibaro:call(idroofdomes, "setValue", "0") end Icons: Roof Dome device and scene: Bedroom Top Window Device: Note: Please keep in mind I am still a rookie… Not used to create this automation and not used to write about what I have created… Hope my post will help some of u to take a leap of faith and start automate your windows. I like to end this as @Sankotronic says: Enjoy coding and in this case assembling I am also working on a Walking Fridge solution… But as long my future wife’s name isn’t Fridge, it’s not going to happen