Scene activation - FGS221

[Lockzi 1]

Hello,

I just installed a dummy FGS221 Switch 2x1,5kW EU (with no load connected) to use as an Away/Home toggle. Since I don't want to label the corresponding position, I would like to have 2 clicks for home and 3 clicks for away. But now I realize there is no Parameter 41 that correspons to Scene Activation as with the dimmers, is it still possible to enable?

[A.Socha 112]

Lockzi, no, right now switch dont have that functions, but on forum you can find few example how to do that by LUA code in hc2

[Lockzi 1]

Lockzi, no, right now switch dont have that functions, but on forum you can find few example how to do that by LUA code in hc2

A. Socha, thank you for replying.

Could you give any hints on what I should be searching for to find those threads? I was searching before starting this thread to no avail...

Please login or register to see this image.

/emoticons/default_sad.png" alt=":(" srcset="https://forum.fibaro.com/uploads/emoticons/[email protected] 2x" width="20" height="20" />

[ Added: 2013-07-20, 23:28 ]

Spent 40 minutes today again trying to find a LUA code that does anything similar to emulating the scene activation that can be found for the dimmers, no luck.

A.Socha could you help me please?

The only thing I've found is the code I was trying out here:

Please login or register to see this link.

but that's for dimmers.

[speedlnx 1]

Please, tell us how to intercept the key connected to S1/S2 in a LUA script!

[StarkJohan 6]

The manual for the 1x3 switch states:

By default, FGS211 device has a second hidden icon.

It represents the second, virtual channel of the device triggered by the second key. The user may add the association to this channel or trigger a scene.

This quote is from the 2x1,5 switch manual:

Association enables Fibaro Switch to directly control a device included in Z-Wave network e.g. Dimmer, Switch (ON-OFF), Roller Shutter or scene (scene may be controlled only through the Home Center controller).

I can't figure out how to do this. Both manuals states that it's possible. Am I missing something? Using the dimmer and parameter 41 this works very well.

[ Added: 2013-12-15, 10:42 ]

Heres a link to my solution for this problem.

Please login or register to see this link.