Dimmer2 S2 controlling FGRGBW

[tvs 1]

Hi,

I have a Dimmer 2 with two switches. I want the S2 to control the on/off & Brightness of a Fibaro RGB Module. I've had the exact same set-up working fine with a Dimmer 1.

 

The problem I have is the RGB Module doesn't come on with a single click, only with a press and hold. And when it does come on its not at its last state, rather it comes on at the min level.

 

I don't really understand all the new associations, I currently have it set at EndPoint 0, Group 5, although I've tried Group 4 too. Whats strange is the RGB Module will switch off with a single click, it just won't switch on.

 

The two Modules are about 3Meters away from each other.

 

Any help would be greatly appreciated.

 

cheers

tom

[tvs 1]

I've just tried Associating the Dimmer2 to a Dimmer1 and it works perfectly. It just struggles switching on the RGB strip. I remember I had a similar issue with a Dimmer1 Once and technical support told me the following:

 

 

 

Krzysztof Gumny 10 Mar 15  

Hello,

Please set for these two dimmers, parameter number 10 on value 0.
It should solve your issue.

Best regards

 

But I can't find a Parameter 10 on the dimmer2.