Virtual Device with RGBW Controller

[Stephan Smit 3]

I currently have a virtual device in HCL that switch the RGBW Controller on to a preset colour.

 

GET /api/callAction?deviceID=46&name=setColor&arg1=20&arg2=11&arg3=0&arg4=20 HTTP/1.1

Host: X.X.X.X

Authorization: Basic xxxxxxxxxxxxxxxxxxxxxxxx

 

I would like to know if it is possible to set this to a preset options from the RGBW (eg LPD or AURORA?)

Would be great if my LED Strip light could be switched on to LPD in case of fire or flood sensor tripped.

Please note this is needed for a HCL...

Thanks 

[theaudioalliance 1]

This can be done in a scene,

 

i.e. IF fire alarm breached, THEN (your RGBW) program 6 (for LPD)

 

I use the same commands to trigger mine when the garage door is opened, however what I am struggling with is having them return to their previous state once it is closed again.

[Stephan Smit 3]

Hi @theaudioalliance

 

Thanks.

I've used this API command to get to program 5 of RGBW. Works perfect.

 

GET /api/callAction?deviceID=84&name=startProgram&arg1=5 HTTP/1.1

[hTiger1 49]

I currently have a virtual device in HCL that switch the RGBW Controller on to a preset colour.

 

GET /api/callAction?deviceID=46&name=setColor&arg1=20&arg2=11&arg3=0&arg4=20 HTTP/1.1

Host: X.X.X.X

Authorization: Basic xxxxxxxxxxxxxxxxxxxxxxxx

 

I would like to know if it is possible to set this to a preset options from the RGBW (eg LPD or AURORA?)

Would be great if my LED Strip light could be switched on to LPD in case of fire or flood sensor tripped.

Please note this is needed for a HCL...

Thanks 

It is not yet managed to get a virtual device to work.

 

What do you want here: XXXX (is it for example. "192.164.56.22:80")

And what does it stand here: xxxxxxxxxxxxxxxxxxxxxxx (is it for example. "Admin: Mars33")

 

Thanks in advance

[Stephan Smit 3]

Hi @HouseTigerOne

 

Host: X.X.X.X    (Your HCL IP address)

Authorization: Basic xxxxxxxxxxxxxxxxxxxxxxxx  (Replace xx with code, Use decoder in link below)

 

Use below link to know Authorization login:password (in this code admin:admin)
Authorization: Basic WRtaW46YWRtaW4= admin:admin
 

Please login or register to see this link.

 

In V4.057 (Beta) it is possible to trigger a RGB program in Scene and Virtual device no longer needed.

[hTiger1 49]

Thanks SCS, I'll try it.