Broadlink RM2 Integration

[DaveScout 1]

Morning all,

 

It's been a while since I have seen any chatter about the Broadlink devices. Has anyone created a virual device or further thoughts on integrating the Broadlink IR / 433 blaster???

Edited July 6, 2016 by T.Konopka
Wrong caterogry

[drasisautomation 11]

Yes, I have done it, but not directly. 

You will need a Android box between Fibaro and Broadlink. This acts as a bridge between these devices. 

[ahh.hanafy 0]

thanks

Edited July 6, 2017 by ahh.hanafy

[drasisautomation 11]

Hello,

 

Sorry I did not get a chance to visit this forum for a long time, so I did not see your reply. 

 

Anyway, there is a free app called RM bridge in Google Play Store. Download that app onto the android box open the app and start the server. 

 

Next, download the files on to your laptop: 

Please login or register to see this link.

 

Open the index.html file and follow the instructions on the page, to learn new IR code. 

This will be of the format like:

192.168.1.100:7474/?cmd=%7B%22api_id%22:1004,%22command%22:%22send_code%22,%22mac%22:%22b4:43:0d:c3:cc:d6%22,%22data%22:%222600c4004e132b1017102a1117102a11161117102a1116111710171017000347521027141611271416112a10171017112a101710171116111600034851112a1116112a1116112614161117112a10171017101612160003484e142a1115122a1017112a101611171027141710171017111600034851112a1116112a1017102b101710171027141710171017101700034851112a1017112a1017102714151214132a111710171017101500034a51112a1017102b1017102b10171017102a1117101710171017000d0500000000%22%7D

 

The IP/port is the IP address of android box and port number mentioned in the RM bridge app.

 

Next you need to create virtual device in Fibaro and input the command you learnt. 

Copy it in http format like:

 

GET /?cmd=%7B%22api_id%22:1004,%22command%22:%22send_code%22,%22mac%22:%22b4:43:0d:c3:cc:d6%22,%22data%22:%222600c4004e132b1017102a1117102a11161117102a1116111710171017000347521027141611271416112a10171017112a101710171116111600034851112a1116112a1116112614161117112a10171017101612160003484e142a1115122a1017112a101611171027141710171017111600034851112a1116112a1017102b101710171027141710171017101700034851112a1017112a1017102714151214132a111710171017101500034a51112a1017102b1017102b10171017102a1117101710171017000d0500000000%22%7D HTTP/1.10x0D0x0A0x0D0x0A

 

Remember, no newline characters etc. 

 

If this is not understandable, will write a full post with screenshots, feeling a little lazy to take screenshots now .

Hope this helps!

[berjdemerjian 0]

dear drasisautomation, how do we change the code generated by the RM Bridge to HTTP format?

[drasisautomation 11]

Hi, 

 

You get to see the http code once you open the index.html, load the IP, port number of RM bridge, select the broadlink, press the learn code button, and press the remote button pointed to the Broadlink device. 

 

As for the final code:

 

You need to strip the IP address and port number , you are left with 

/?cmd=%7B%22api_id%22:1004,%22command%22:%22send_code%22,%22mac%22:%22b4:43:0d:c3:cc:d6%22,%22data%22:%222600c4004e132b1017102a1117102a11161117102a1116111710171017000347521027141611271416112a10171017112a101710171116111600034851112a1116112a1116112614161117112a10171017101612160003484e142a1115122a1017112a101611171027141710171017111600034851112a1116112a1017102b101710171027141710171017101700034851112a1017112a1017102714151214132a111710171017101500034a51112a1017102b1017102b10171017102a1117101710171017000d0500000000%22%7D

Add a GET<space> at the beginning. Append the string  <space>HTTP/1.10x0D0x0A0x0D0x0A at the end of the command. 

 

 

[matt1981 37]

the BWSsystems creators of the Ha-Bridge that allows for voice commands with the Echo or the Google home stated in a thread, they are actively working to implement the Broadlink RM into the bridge.  

Please login or register to see this link.

[bhorwitz 0]

Could anyone please share a screen capture of how the virtual scene would be? 

I'm making a lot of efforts but it just doesn't work. Here's my scene:

 

 

Please login or register to see this attachment.

[ks-media 1]

Hello,
In picture 1 you see command sent by Fibaro.

Figure 2 shows the RM configuration (codename)

With me it works without problems with IR and also 433Mhz devices.

Please login or register to see this attachment.

Please login or register to see this attachment.

[Erick Lucas 0]

 

I would like to know if anyone could do it and if you have a step by step the port tcp ip and the 7474

[NunoMartins 2]

I found this 

Please login or register to see this link.

 is very simple to use and to learn!

it works for me and is very nice!

i have a cubox-i running xbian for kodi, and is my bridge to Fibaro...

And IFTTT now has support to broadlink too !!!

Edited December 11, 2018 by NunoMartins

[Joystick 2]

Hi all,

maybe someone can help me here:

I installed rm bridge on My tablet.

when I Open the Index file , and Try to add a code, i get an error shown that My Broadlink is no RM2. However it is a RMPro with latest Firmware.

what can i do?

[buleus 0]

On 12/11/2018 at 12:24 PM, NunoMartins said:

I found this 

Please login or register to see this link.

 is very simple to use and to learn!

it works for me and is very nice!

i have a cubox-i running xbian for kodi, and is my bridge to Fibaro...

And IFTTT now has support to broadlink too !!!

Hello

Can you tell how did you create the vd?

Edited January 21, 2019 by buleus

[NunoMartins 2]

4 hours ago, buleus said:

Hello

Can you tell how did you create the vd?

The package as a webpage to get the codes from ir device. Just put that code in the vd button ex:”GET /execute/54876-49764-9385-63854/SALA/ACON HTTP/1.1” and ip and port created with the app to the cubox 

Edited January 21, 2019 by NunoMartins

[buleus 0]

Thank you NunoMartins...i'm kinda dump :))))) 

this is the code get from the app

2600a8004c171118221a0d180d1f21170f1810172517101612151315120003654e1512152715121512162615121513152714121513151215130003654e1512152715121513142615141412152616121513151215130003654e1414142714131513142714131512152615131512151315120003654e1513152615121613152614121513162516111513151314130003654e161115261613151116261512151216261512151216131415000d05

this is the execut code wich is working from web:

http://192.168.0.151:1880/execute/L29e203!/mansion/volume_up

 

i really don't understand what should i put in vd button....can you help me to understand? I mean to give me the entire sintax...should be like:

GET http://192.168.0.151:1880/execute/L29e203!/mansion/volume_up  HTTP/1.1

or something like:

GET /execute/2600a8004c171118221a0d180d1f21170f1810172517101612151315120003654e1512152715121512162615121513152714121513151215130003654e1512152715121513142615141412152616121513151215130003654e1414142714131513142714131512152615131512151315120003654e1513152615121613152614121513162516111513151314130003654e161115261613151116261512151216261512151216131415000d05/mansion/volume_up HTTP/1.1

 

thank you

Edited January 22, 2019 by buleus

[NunoMartins 2]

You have to create a file where you save your codes with a name! Then on vd you put “ Get /execute/your-secret-key/room/name-of-comand HTTP/1.1

[buleus 0]

Thank you!

Can you tell me what i'm doing wrong?  not working from fibaro but working from web and ifttt....and excuse me

Please login or register to see this attachment.

Edited January 23, 2019 by buleus

[NunoMartins 2]

I have only one line...

Please login or register to see this attachment.

[buleus 0]

but were you define the brigde? in our case broadlink-rm-http ip? or no need to define....i think there i'm lost.....

[NunoMartins 2]

Put the ip and port in main page of vd.

that works for me... really well!!!

[buleus 0]

Thank you NunoMartis....i'm out of luck....have no ideea what is wrong......maybe can you post your VD?

Please login or register to see this attachment.

Please login or register to see this attachment.

Please login or register to see this attachment.