Home Center Light HTTP Commands

[kalmanv 2]

Hello,

 

I have a Home Center Lite. Im trying to playing around a bit with Virtual Device executing HTTP commands since HCL has no LUA.

 

So I created a VD added the HCL IP (or 127.0.0.1) and I set the port to 80.

I wanted to turn on a device from a virtual button to test sending http commands, but when I push the button nothing happens.

 

I used this code:

 

GET /api/devices/DEVICID/action/turnOn HTTP/1.10x0D0x0A
Host:HCLIP0x0D0x0A

Authorization: Basic [MYUSERNAMEANDPASSINBASE64]0x0D0x0A

 

When I paste this url to my browser http://HCLIP/api/devices/DEVICID/action/turnOn its working perfectly.

 

Can anyone help whats the issue?

 

Would be nice to fire some http commands to handle devices:)

 

Thanks

 

 

[Kuba13 49]

Authorisation is derived from your unit's login/password it is not static number. if you changed either one you need to calculate new ones.

it is suggested you enter name:password (as in name you use to login devided from password by into

Please login or register to see this link.

  base64decode (dot) org

 

i suspect you might have used default one (usually admin login admin password) if i am misstaken and you are awere of this than please accept my apologies for undeestimating the.

[kalmanv 2]

Im using the good credentials in base64 format...but thanks anyway.

[tinman 1,028]

well maybe text formating problem? My proposal, import my VD and change only the command, but watch the spaces, do not change formating / line breaks, watch the IP/Port used.

 

 

Edited October 27, 2016 by tinman

[kalmanv 2]

9 minutes ago, tinman said:

well maybe text formating problem? My proposal, import my VD and change only the command, but watch the spaces, do not change formating / line breaks, watch the IP/Port used.

 

It worked! thx a lot.

 

[Flowy 36]

hi, one question:

what are the codes here in bold in the example:

 

GET /api/devices/DEVICID/action/turnOn HTTP/1.1 0x0D0x0A
Host:HCLIP 0x0D0x0A

Authorization: Basic [MYUSERNAMEANDPASSINBASE64] 0x0D0x0A

 

I also have seen something a bit different in other examples.

I mean, what are they needed for? I have VDs without all those codes and they work perfectly.

Just a curiosity.....

 

[kalmanv 2]

On 2016. 10. 31. at 7:25 PM, Flowy said:

hi, one question:

what are the codes here in bold in the example:

 

GET /api/devices/DEVICID/action/turnOn HTTP/1.1 0x0D0x0A
Host:HCLIP 0x0D0x0A

Authorization: Basic [MYUSERNAMEANDPASSINBASE64] 0x0D0x0A

 

I also have seen something a bit different in other examples.

I mean, what are they needed for? I have VDs without all those codes and they work perfectly.

Just a curiosity.....

 

0x0D0x0A is a code that tell to fibaro its the end of the line and it can send the command.

Can u explaine how your VD's working then?

 

Thanks

 

[Flowy 36]

9 hours ago, kalmanv said:

0x0D0x0A is a code that tell to fibaro its the end of the line and it can send the command.

Can u explaine how your VD's working then?

 

Thanks

 

Simply without using all those codes...

 

example of working string to reboot hcl:

 

POST /api/settings/reboot HTTP/1.1
Host: 192.168.1.10
Authorization: Basic TDhYWRtaW46SWRtaK

 

that's it