HC2 does not restart automatically after a power outage.

[severin 10]

Please login or register to see this link.

Please login or register to see this link.

 

 

The HC2 does not restart automatically after a power outage.

Restart can only be activated by pressing the reset button on the back of HC2.

Fibaro please fix the issues.

[cag014 628]

Works fine for me.... had power outage just a day ago!?

[severin 10]

Hi cag014

Which software version are you using?

I am using the latest version 4.100.

[cag014 628]

Same here 4.100.

Have tried again and it works fine.

Question - when you disconnect and connect the power is your system comes up automatically?

 

[severin 10]

 

I am using 4.100

My HC2 will only restart after a power failure when I press the on/off button on the back of the unit.
Does anyone have an idea what could be wrong?

Unfortunately, the attempted function recovery changed nothing.

[Jibran 2]

I have been facing the same issues with my two controllers ( HC2) For about 3 months. Updating firmware doesnt fix these issues. 

 

The only solution i can tell is that , there is a VGA output in HC2. Connect VGA cable from HC2 to led or lcd and also connect usb keyboard and mouse .

 

Go to the Bios Setup , you will check there is a option of POWER . Change it.  For reference check that link of video. I have tested it but problem is still there.

 

Please login or register to see this link.

[T.Konopka 8]

The topic has been moved from "

Please login or register to see this link.

" to "

Please login or register to see this link.

".

 

Temat został przeniesiony z "

Please login or register to see this link.

" do "

Please login or register to see this link.

".

[amoebe 5]

I had exact the same symptoms as Marbe described, and I've solved it. I saw on this forum a hint about the CMos battery, so I checked the voltage.

It was 2,8 Volts, and the CR2032 should have 3 Volts, so I assumed that it was "empty". I replaced it with a new one, measured voltage 3,3 Volts.

Bios settings were not affected when I replaced the battery. Now the HC2 boots when I remove the power and plug it in again. I had this issue for months, and now I'm a happy person. I live in an area where we have several power outages for hours and that happens a few times per year, and my UPS will not hold that long. I hope, by sharing this, that many of you can solve this now finally.