Welcome to Smart Home Forum by FIBARO
Dear Guest,
as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.
As a member you can:
- Start new topics and reply to others
- Follow topics and users to get email updates
- Get your own profile page and make new friends
- Send personal messages
- ... and learn a lot about our system!
Regards,
Smart Home Forum by FIBARO Team
Question
severin 10
My HC2 will not boot af power failure.
When the power comes back the blue leds starts flashing but the process stops when all 8 LEDs are turned on.
I have checked the bios in the HC2 is set to Power on "After power failure".
The Warm Boot function (pressing the on / off switch on the rear panel) restart the HC2 and provided access to the BIOS.
But the Cold Boot function (the power supply is dis- and reconnected) do not work. Only 2 times out of 10 attempts I was able to connect the BIOS settings at a Cold Boot.
I also have tried to change Power on setting to "last statement" but it did not help. Then the BIOS was set back to Power on "After power failure".
Since there has only been one power cut since I bought the HC2 center januar 2016, it must be open to question whether it is a manufacturing defect?
Fibaro informs in a service video: "After this (setting the BIOS to: Power on "After power failure) Center should start correctly. Otherwise, it is damaged and you should return it to service".
Is there someone who knows if there are more repair opportunities or whether the device should be returned to service / repair?
Link to comment
Share on other sites
40 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.