MaTi 29 Share Posted September 26, 2017 The Danalock 3 with Z-Wave support has been released. Before actually buying one, can someone please confirm compatibility with the HC2/HC-lite ? Thanks Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted September 26, 2017 @MaTi, We have bought one for tests directly from Poly-Control (guys responsible for Danalock). I will start testing it in few days. 1 1 Quote Link to post Share on other sites
0 MaTi 29 Author Share Posted September 26, 2017 Wonderful; look forward to the results! Highly appreciated. Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted September 27, 2017 Hi @MaTi and othere following this topic. So i have tested it and it is working. And i think you will hear sound of locking/unlocking Danalock from the other side of the door. Is pretty loud in comparison to previous generation. There is only Lock/Unlock button in HC. I included Danalock via add DoorLock (secure inclusion). This device is S2 ready. It could be nice if Fibaro would support S2. Also FLIR works as usual. When i lock via app, it happens immediately and i do no have to wait till it locks. I can also see status if i lock via keys or that "handle". It is higly positive. But i do not see LED turned ON, when i lock and unlock manually. Only when i lock/unlock via app. There is no PIN setting (if there is any) and it has not template. So you need set parameters manually if it is needed. I will send downloaded template from HC to Fibaro support. Also additional settings as calbration, etc. needs to be done via Danalock app as usual. I did not made any setting to it, i just included it into HC, so no calibration, etc. Interesting output, when i try to set parameter 1: [12:42:43] ID 1361: Nastavit parametr 0. hodnota=1 [12:42:45] ID 1361: Hláška parametru 0 obdržena, hodnota=0 [12:43:06] ID 1361: Nastavit parametr 1. hodnota=1 [12:43:07] ID 1361: Hláška parametru 1 obdržena, hodnota=0 [12:43:29] ID 1361: Nastavit parametr 0. hodnota=1 [12:43:29] ID 1361: Hláška parametru 0 obdržena, hodnota=0 Finaly after 4th attempt: [12:45:37] ID 1361: Nastavit parametr 1. hodnota=1 [12:45:39] ID 1361: Hláška parametru 1 obdržena, hodnota=1 Ok now, it seems that parameters setting is working. Attached file is template downloaded from HC a both master and slave through the API. Danalock V3.zip 1 Quote Link to post Share on other sites
0 MaTi 29 Author Share Posted September 27, 2017 @jakub.jezek Thank you! Appreciated. Looks like I no longer have an excuse to order one.. Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted September 27, 2017 Also i forgot to add, that device feels better than the old one. Quote Link to post Share on other sites
0 PaddaOnIce 0 Share Posted September 28, 2017 (edited) I have ordered one, should arrive tomorrow. Will provide feedback soon! Edited September 28, 2017 by PaddaOnIce Quote Link to post Share on other sites
0 Soft 17 Share Posted October 2, 2017 Hi there, I have also ordered one, have anyone made a icon set for this look yet? Not even sure if you can change the default "door lock" icon. Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted October 2, 2017 Hi @Soft, That is the thing i did not tested . Quote Link to post Share on other sites
0 Soft 17 Share Posted October 2, 2017 (edited) OK, I'm going to make a set in advance, does the lock go red when locked ? Seems to be doable, scroll down and the tutorial actually shows how to change the door lock icon http://www.smarthome.com.au/smarthome-blog/how-to-change-fibaro-home-center-icons/ Edited October 2, 2017 by Soft Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted October 2, 2017 Yes. Icons are changing. Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted October 2, 2017 (edited) @Soft, So far after including device to Fibaro, that device has standart Door Lock icon, that change color from green to red and vice versa. And i really do not remember if i were able to change icon. Edited October 2, 2017 by jakub.jezek Quote Link to post Share on other sites
0 Soft 17 Share Posted October 2, 2017 You can change the icon I just made two, feel free to test them Quote Link to post Share on other sites
0 jakub.jezek 265 Share Posted October 2, 2017 Unfortunatelly i had to return Danalock, so i cannot test the icons. I had it only for a tests that lasted for a afternoon only. Quote Link to post Share on other sites
0 MaTi 29 Author Share Posted October 2, 2017 Mine should be arriving within 1-2 days.. Will try. The icons look neat, so thanks in advance! Quote Link to post Share on other sites
0 Sankotronic 1,333 Share Posted October 2, 2017 Just my little contribution, maybe you will like it: Enjoy! 2 Quote Link to post Share on other sites
0 Soft 17 Share Posted October 2, 2017 2 hours ago, Sankotronic said: Just my little contribution, maybe you will like it: Enjoy! Good idea to flip the locked one Quote Link to post Share on other sites
0 Bodyart 192 Share Posted October 2, 2017 3 hours ago, Sankotronic said: Just my little contribution, maybe you will like it: Hey @Sankotronic, are you using that device? If yes, any opinion? Quote Link to post Share on other sites
0 Sankotronic 1,333 Share Posted October 2, 2017 54 minutes ago, Bodyart said: Hey @Sankotronic, are you using that device? If yes, any opinion? Hi @Bodyart, I don't have it yet. I have entrance door on which I have to first pull handle up to be able to lock it. Maybe I'm wrong but when I read about this Danalock then it is not capable of locking such door. So then, what is the use of automatic lock if it can't lock the door unless I walk to it and pull the handle? It seems that I will have to replace my entrance door with something better and that can be automated. Quote Link to post Share on other sites
0 Torry 0 Share Posted October 2, 2017 I had the same lock in my door, I had to pull the handle up first. I just changed the lock inside the door aswell Quote Link to post Share on other sites
Question
MaTi 29
The Danalock 3 with Z-Wave support has been released.
Before actually buying one, can someone please confirm compatibility with the HC2/HC-lite ?
Thanks
Link to post
Share on other sites
Top Posters For This Question
28
12
9
6
Popular Days
Oct 2
14
Oct 10
10
Oct 24
7
Oct 25
6
Top Posters For This Question
Soft 28 posts
jakub.jezek 12 posts
petervanderpol 9 posts
Teddan 6 posts
Popular Days
Oct 2 2017
14 posts
Oct 10 2017
10 posts
Oct 24 2017
7 posts
Oct 25 2017
6 posts
Popular Posts
jakub.jezek
@MaTi, We have bought one for tests directly from Poly-Control (guys responsible for Danalock). I will start testing it in few days.
Sankotronic
Just my little contribution, maybe you will like it: Enjoy!
jakub.jezek
Hi @MaTi and othere following this topic. So i have tested it and it is working. And i think you will hear sound of locking/unlocking Danalock from the other side of the door. Is pretty lo
Posted Images
89 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.