After 2 months my HC2 suddenly stopped responding. I can't ping it, I can't access it via web interface. I decided to connect monitor to external port and first message I got after boot was:
e1000e: 0000:01:00.0: The NVM Checksum Is Not Valid
Looks like critical error. Probably eth0 device cannot be created and HC2 doesn't receive IP address from dhcp server as there is no connection. I tried to reboot device several times. Sometimes lights on the ethernet card are completely off and sometimes they are on (both green and yellow).
Any ideas? By the way - HC2 was very hot when the error appeared.
Question
tylkologin 2
Hi,
After 2 months my HC2 suddenly stopped responding. I can't ping it, I can't access it via web interface. I decided to connect monitor to external port and first message I got after boot was:
e1000e: 0000:01:00.0: The NVM Checksum Is Not Valid
Looks like critical error. Probably eth0 device cannot be created and HC2 doesn't receive IP address from dhcp server as there is no connection. I tried to reboot device several times. Sometimes lights on the ethernet card are completely off and sometimes they are on (both green and yellow).
Any ideas? By the way - HC2 was very hot when the error appeared.
Kind regards,
Michal
Link to post
Share on other sites
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.