Heating Panel Schedule doesn't update thermostat

[Dunkigrease 0]

I am controlling a TKB thermostat using the heating panel.  However the heating panel scheduler doesn't switch the thermostat on/off.  

The scheduler is not in manual mode.

As you see in the screen shots,  taken at 12:12 the heater controller should have changed to 22 degC at 11:15 but it is still showing 18 deg.

 

Can anyone shed any light on this problem. Thanks

Stephen

 

 

Please login or register to see this attachment.

Please login or register to see this attachment.

[albundy 0]

Hello,

I've got the exact same problem than you.

I've got 3 thermostats in the heating zone, none of them are triggered by the heating panel.

 

Cédric

[icossane 1]

Same problem with the MCO thermostat for me.

[andreit 0]

Same problem with MCO thermostat

[silvinnio 4]

Hi 

According to @m.roszak looks like changing any of settings manual way (on device, app or web interface) forces devices to be excluded from heating /cooling panel schedule (overrides it) for default time of 2 hours. 

I just build my house cooling system and used MCOHome MH8 FC-EU as thermostat with cooling map from Fibaro AC panel and so far not updating but after reading this post, I'll see later on after few hours.

I have no problem with updating the heating map, worked fine since few years ago.

 

Updates:

The Cooling set-point from AC panel it is not sent to the thermostat. ?.

Need to make LUA code to have something to use this thermostat.

 

 

 

Edited July 6, 2020 by silvinnio