My desired setup is as follows: A Dimmer 2 is connected to a single momentary switch. Through this switch I would like to control one channel on a RGBW dimmer for LED strips remotely, through association. A similar solution works fine when there is a separate load on S1 of the dimmer (e.g. downlights), using association on the S2 part of a double switch to associate to the RGBW. (The RGBW in my case is used to control 3 or 4 separate LED strips, one on each channel, each in a different room.The
Actually, using the FGB-002, that really is the recommended way. the bypass is not a simple passive component, it is active and makes the dimmer happy while consuming less than about 1 W. Works in 2 or 3 wire setup.
Tried and tested...
It has been reported before, and it might be a FGS-2x3 bug... Seems it happens when FGS is switching between "routed" and "direct" connection.
It works for me, but there is a forum post about "missing Central Sc