Disable power report completely

[climbingrose 0]

Hi guys,

 

We have installed a large number of FGS-223 units around the house. The controller is Aeotec Z stick Gen5 with Home Assistant. Whenever the switches are turned on / off, it seems to send power report to Z-Wave network. This sometimes can generate quite a bit of traffic if multiple lights (5+) are toggled as the same time. I've been trying to turned off power / energy report for those devices by changing parameters 50 to 59. However they don't seem to completely disable power reporting.

 

Any ideas?

[RichardHoman 3]

Have you been able to find a solution? Same situation here. Network works fine but is very prone to delays. Even after disabling all power reporting options I could find, there still are reports. When activating scenes for more than 2-3 lights at once, delays will be noticable. 'TV scene' here changes the status of 6 lights, all dimmer2's or RGBW2's. it may take up to 20 seconds for the last changes to be finished. That's just rediculous.