Welcome to Smart Home Forum by FIBARO
Dear Guest,
as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.
As a member you can:
- Start new topics and reply to others
- Follow topics and users to get email updates
- Get your own profile page and make new friends
- Send personal messages
- ... and learn a lot about our system!
Regards,
Smart Home Forum by FIBARO Team
Question
Streetchat 0
Hi all.
I am new to this forum and totaly newbie with those Fibaro FGR 223.
I just installed one on a roller blind last week to use it whit Homeassistant.
I use a toggle swith with three buttons (up stop and down)
Secure inclusion worked immediatly
I set the parameter 20 to 1 (Toggle switch)
i check the parameter 151 was on 1
up stop and down from the button works well too.
So i start a calibration by setting the parameter 150 to 2 and start.
The blind was opened at this moment (up), so the blind start to down, then up, then down.
Calibration Done.
But, in homeassistant, the blind is shown as open when it is close and close when it is open.
So i decided to restart the calibration by exluding the fgr223 first, then include it back.
This time, i down completly the blind and start a new calibartion (as stated in documentation, the blind is supposed to up, then down, then up).
But in fact, i hear two clic from the fgr223, then one clic and the blind up then one clic, then one clic and the blind down then one clic when it reached the bottom.
Then nothing, the calibartion seems to be done and again, appears as open in home assistant when in reality it is close and close when it is open.
So, my question is:
How can i start again a new calibration from the begining, to be correctly visible in homeassistant ?
I already tried to reset the fgr223 to factory before include it once more to the system (and now, i have 3 unused node...), but the calibration from the start (with blind closed) is doing exactly the same thing.
How can i completly delete this fgr223 from the zwave network to make disappear all old nodes ? (i.e: node 1 is the aeotec zstick, node 2 was never seen, node 3 is the first try with this module, node 4 the second try,....)
Many thanks by advance for any help.
Kind Regards.
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.