Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


  • 0

Walli roller shutter not calibrating


Shady Hamilton

Question

Hello, i installed 4 Walli roller shutters and i am trying to calibrate them with no success. i tried to initiate the calibration from the parameters or from the switch, both will make the wall switch blink white but nothing will happen, it will not move up or down. 

 

without calibration, the switch is working but it will not stop when it reach the end, the wall switch LED will stay white till i press it again

Link to comment
Share on other sites

4 answers to this question

Recommended Posts

  • 0
  • Inquirer
  • @flix I got this answer from the support, i didn't try it yet, because by the time i got this answer i was already using MCO roller shutter switches instead of the Fibaro, i hope this answer will help you:

     

    Dear customer,

    First of all I want to apologize for such late answer.

    When it comes to Walli / Roller Shutter’s we o not have one universal configuration for all shutter’s / blinds etc. in this case, you’ll have to try with different values of parameter’s 151 – 157, please perform a few tries in order to calibrate your device,

    We’re aware of this issue and we’ve already forwarded it to our engineers, who are currently working on resolving it as soon as possible. I’m very sorry for the inconvenience it caused but I have to ask you for a little more patience.

    Link to comment
    Share on other sites

    • 0

    Hello, 

     

     

     

    same problem.

     

    I try to calbrate manually (reading the notice) but it didn't work.

     

    Very sad...

    Link to comment
    Share on other sites

    • 0

    Hello,

     

    Did you find a solution for calibration ? I'm facing the same problem on HC3 with MCO Home roller shutter. I tried several hours and almost destroyed one of my rollershutter. The switch didn't stop when reach the top or bottom positions. I also try to made the calibration manually (by pressing 6 times the UP or DOWN buttons) but didn't work properly.

     

    Edited by MBU
    Link to comment
    Share on other sites

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Answer this question...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

    ×
    ×
    • Create New...