problem with connected

[xronical 0]

Hello,

 

I bought double switch and I wanted engage it. but I have one problem. I attached picture with scheme

when I engaged this (Picture with fibaro module) so, fibaro module it´s ok (via phone or pc), but wall switches not works.

But when I used multimeter and I linked S1 with N (picture) all switches working fine. Can you help me please?

 

Please login or register to see this attachment.

[Flash 100]

Hi @xronical

 

I asume that if you use the switch the multi meter also gives 230 Volts, on S1 and N?

Have a look at the parameter 20 settings.

here you can decide between the diiferant kind of switches and state.

 

 

 

[xronical 0]

hi

yes multimeter gives,

 

I tried change parameters 20 but, is very strange, because when I push wall switch (middle where is fibaro) about 6-7 times very fast, so  lights on, but only from this switch

[Flash 100]

Hello,

 

Try to use S2 and Q2 and see if you have the same problem. Because this is very strange.

[xronical 0]

I tried it, but result was the same....

I think that module is good, because I tried with another wall switch and work fine

So I dont know where is problem