Device learning with HC3

[pblacky 4]

Today I tried to teach some products to my HC3. Unfortunately it doesn't work!

It is a NodOn Soft Remote and a Hank Scene Controller.
Both devices worked in the old HC2. When teaching, there is no connection between the HC3 and the devices although I use the teaching processes of the manuals.

Does anyone have a tip on how I can find out WHERE the problem is?
I started my HC3 before, that did NOT bring a solution

[Resiba 0]

I have the same probleml...

I leave this day a ticket to Fibaro support !

[wienog 107]

Strange, my two Nodon soft remotes work absolutely normally...

 

EDIT:

No, you are right, I tried to add a third one I had and it didn't work.

The other two were included in an earlier version...

So, definitely a bug.

Edited August 8, 2020 by wienog

[Martin_N 143]

@pblacky @Resiba

Pblacky - write that you used the driver in HC2. I may ask stupidly, but did you reset NodON and erase it from the old system? I have the same driver and I even used it as a standalone controller. Then I had to reset the controller, switch to slave mode and assign it to HC3 only after the initial "removal" mode.

eM

[pblacky 4]

Thanks @Martin_N for this hint. maybe thats the solution.
I have now used another remote control and it works.
 

[wienog 107]

@Martin_N You are right: after resetting the NodOn, it could be normally included.

[Resiba 0]

Thanks @Martin_N and @pblacky,

 

I have reset the remote control (not taken the time to read the manual ...).

 

Now, she is normally included, and i have an access to the actions provided by the button.

 

But nothing happens!
No scene launched when a button is pressed! (on HC3)

I am going to find out how to readjust the parameters as on the HC2.
But it seems incomplete on the HC3 !!!

Edited August 9, 2020 by Resiba

[tinman 1,025]

Nodon devices (most of them) can be configured to use central scene or scene activation. Depending on how they has been setup, they might not be properly recognized (the clicks).

[Martin_N 143]

//they might not be properly recognized (the clicks)

Tinman probably means that NodOn can work in steam key mode (2x2) or simple (4x1).
I recommend using only 4x1 (each button separately) to activate scenes. Be careful, if you hide the associated elements (drivers or others), the scenes have a problem.

eM.

[Mestregg 0]

My NodOn wall switch is now working properly on HC3. You have to use trigger like 

 

Please login or register to see this code.

 

And in your code something like that:

Please login or register to see this code.

 

Don't forget to set parameter 3 with value 1.

[Jounikeino 0]

Cannot change parameters due there is not any? I have Octan where this is possible, but not with wall nor soft remotes.