Weatherflow HC3?

[minsad79 19]

Are there any examples of integration into Weatherflow HC3?

Or a quick app?

[Bodyart 229]

Hi @minsad79,

I didn't see your message earlier. Currently i'm working on a QA for WeatherFlow, but it's not ready yet to share.

Please login or register to see this image.

/monthly_2020_05/afbeelding.png.e02122331ae3273d3b872ada93c46674.png" />

I will post it when ready.

[minsad79 19]

On 5/23/2020 at 5:09 AM, Bodyart said:

Hi @minsad79,

I didn't see your message earlier. Currently i'm working on a QA for WeatherFlow, but it's not ready yet to share.

Please login or register to see this link.

I will post it when ready.

hi Bodyart

I saw your post

This is a very nice solution.

Thanks for your answer

I'll wait for the post

[afendikov 35]

Hi guys,

 

My QA is working good too, but for internal use for now.

I made virtual devices - for me it's more convenient.

Also I'm using non-standard way to receive data.

Standard way - get http requests from WeatherFlow cloud.

 

Non-standard - to install UDP listener on RaspberryPi - it transfer all data locally to MQTT and I receive in QA from MQTT broker.

wind data updates every 3 sec, other data - usually 60 sec, i't limitation of weatherstation itself.

--

Please login or register to see this link.

 

 

Please login or register to see this attachment.

[minsad79 19]

3 hours ago, afendikov said:

안녕하세요.

 

QA도 제대로 작동하지만 현재는 내부 용으로 사용됩니다.

나는 가상 장치를 만들었습니다. 더 편리합니다.

또한 데이터를 수신하는 비표준 방법을 사용하고 있습니다.

표준 방식-WeatherFlow 클라우드에서 http 요청을받습니다.

 

비표준-RaspberryPi에 UDP 리스너를 설치하기 위해 모든 데이터를 로컬로 MQTT로 전송하고 MQTT 브로커에서 QA로 수신합니다.

바람 데이터는 3 초마다 업데이트되며 다른 데이터는 일반적으로 60 초이며 기상 관측소 자체의 제한은 없습니다.

Please login or register to see this link.

:

Please login or register to see this link.

 

 

Please login or register to see this attachment.

Can you post QA?

There is a weatherflow connected to HA

[afendikov 35]

@minsad79 are you ready to be betatester?

do you have raspberry pi to install UDP listener or prefer http update?

 

I'll try to prepare for release in a few days...

[minsad79 19]

2 hours ago, afendikov said:

@minsad79 are you ready to be betatester?

do you have raspberry pi to install UDP listener or prefer http update?

 

I'll try to prepare for release in a few days...

Beta tester of course

I have a nuc

weatherflow install UDP listener install

ready to release in a few days ...

[afendikov 35]

so, guys, could you please test it.

 

I prepare short instruction and icons.

 

BTW rain icons are great - they shows in mobile app and there is always knows what rain intensity at station.

 

After testing I will upload it to Fibaro Marketplace.

 

Thanks

 

Please login or register to see this attachment.

Edited May 29, 2020 by afendikov

[minsad79 19]

Hi Ah Fendikov

I tested your quick app

udp or http

Both work perfectly

Perfect icon

Weatherflow integration is perfect

The manual is also perfect ....

Thank you for your dedication

Best fast app

small problem

Battery value is not displayed

 

 

 

 

No it was my NUC problem

Now the price comes out well

sorry

Please login or register to see this attachment.

Please login or register to see this attachment.

Edited May 31, 2020 by minsad79

[Bodyart 229]

Hi all!

Posting my test version of WeatherFlow QA.

It's a different approach than @afendikov, without child devices, saving the values in global variables to be used as triggers elsewhere.

Feel free to try

 

Please login or register to see this attachment.

Edited June 1, 2020 by Bodyart
New version of QA

[jimicr 89]

12 minutes ago, Bodyart said:

Hi all!

Posting my test version of WeatherFlow QA.

It's a different approach than @afendikov, without child devices, saving the values in global variables to be used as triggers elsewhere.

Feel free to try

Please login or register to see this link.

Please login or register to see this attachment.

Nice work!

 

Jim

[minsad79 19]

1 hour ago, Bodyart said:

Hi all!

Posting my test version of WeatherFlow QA.

It's a different approach than @afendikov, without child devices, saving the values in global variables to be used as triggers elsewhere.

Feel free to try

Please login or register to see this link.

Please login or register to see this attachment.

Bodyart

 

Nice integration

 

thanks

[minsad79 19]

4 hours ago, Bodyart said:

Hi all!

Posting my test version of WeatherFlow QA.

It's a different approach than @afendikov, without child devices, saving the values in global variables to be used as triggers elsewhere.

Feel free to try

Please login or register to see this link.

Please login or register to see this attachment.

Quick app doesn't work

 

What mistake i made

Can you advise?

 

 

Please login or register to see this attachment.

Please login or register to see this attachment.

Edited May 31, 2020 by minsad79

[Bodyart 229]

Hi @minsad79,

 

sorry in a hurry to post this test version i didn't managed to make a manual yet. ?
The QA searches automatically for your station number it's not needed for user to configure. Your QA variable stationNo should be set to 1 for the first WeatherFlow station, 2 for the second etc. Btw. the current version supports only 1 station, but working on more stations and also on new Tempest.

Thank you for asking
Please let me know if it works now

 

Edited May 31, 2020 by Bodyart

[minsad79 19]

11 hours ago, Bodyart said:

Hi @minsad79,

 

sorry in a hurry to post this test version i didn't managed to make a manual yet. ?
The QA searches automatically for your station number it's not needed for user to configure. Your QA variable stationNo should be set to 1 for the first WeatherFlow station, 2 for the second etc. Btw. the current version supports only 1 station, but working on more stations and also on new Tempest.

Thank you for asking
Please let me know if it works now

 

In the way you advised me

Does not work

Please login or register to see this attachment.

Please login or register to see this attachment.

[Bodyart 229]

3 hours ago, minsad79 said:

n the way you advised me

Does not work

Hi, @minsad79, I apologize for the nasty bug.
The bug is corrected and original posting has new file.
Just to prevent confusion posting the file here as well

 

Please login or register to see this attachment.

[minsad79 19]

3 hours ago, Bodyart said:

Hi, @minsad79, I apologize for the nasty bug.
The bug is corrected and original posting has new file.
Just to prevent confusion posting the file here as well

 

Please login or register to see this attachment.

I installed a new QA as your advice.

Some values do not appear

Temperature, battery, etc. are not displayed

Please login or register to see this attachment.

Please login or register to see this attachment.

[Bodyart 229]

Hi @minsad79,

 

please, check your QA variable Api_key; your key seems to be too short (22 characters) - mine is 36 characters long. Probably is part of your Api Key missing...

Your Api Key should look like: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

Let me know

Edited June 1, 2020 by Bodyart

[minsad79 19]

15 hours ago, Bodyart said:

Hi @minsad79,

 

please, check your QA variable Api_key; your key seems to be too short (22 characters) - mine is 36 characters long. Probably is part of your Api Key missing...

Your Api Key should look like: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx

Let me know

My API key is 36 words

I deleted the latter part to hide the information.

[Bodyart 229]

Hi @minsad79,

i've checked and double checked the QA installed many times and it runs flawless out of the box. Also tested today on another HC3 machine

Still trying to figure out, what the problem at your side is. Maybe i can create a QA with extra debugging info to check the running on your system and send it in a PM to you.

[pflugj 13]

Hi.

First of all THANKS for the nice App

I have been using it for at least a year now and it works fine!

Unfortunately I had a solar panel battery failure and of course my unit was just out of warranty and the old WeatherFlow is no longer being produced..?
I had to buy a new Tempest station.

 

So I installed the new HUB mas descibed here:

Please login or register to see this link.

So the Station Id stayed the same!

To not loose the history of the old ¨Air¨ and "Sky" sensors I had to add the old sensors to the new Tempest Hub.
This works well and I can now see the Tempest "STxxxxxx" as well as the "ARxxxxx" and "SKxxxxx" sensors.

 

The app works well, but it does not seem to pick up the new sensor "STxxxxxx¨

What I do not know:
How to tell the App to use the new Tempest Sensor?

Is that possible??

 

Thanks for your help
Jurgen