# Implementation in the ANSYS finite element code of .Implementation in the ANSYS finite element code

date post

01-Sep-2018Category

## Documents

view

225download

0

Embed Size (px)

### Transcript of Implementation in the ANSYS finite element code of .Implementation in the ANSYS finite element code

UNIVERSIT DEGLI STUDI DI CAGLIARI Dottorato di ricerca in

INGEGNERIA ELETTRONICA ED INFORMATICA

XV Ciclo

Implementation in the ANSYS finite element code of the electric vector potential T-,

formulation and its validation with the magnetic vector potential A-V,A formulation.

Relatori Tesi di dottorato di Prof. Ing. Alessandra Fanni Dott. Ing. Pietro Testoni

Implementation in the ANSYS finite element code of the electric vector potential T-, formulation

and its validation with the magnetic vector potential A-V,A formulation.

Pietro Testoni Gennaio 2003

To my mother,

my sister and

my brothers

Acknowledgements

Acknowledgements

I wish to express my deepest gratitude to Professor Piergiorgio Sonato for proposing and

supervising this work and for his appreciated suggestions.

I would also warmly thank Dr. John Swanson for his very helpful e-mail correspondence

about the ANSYS programmable capabilities.

Last, but not least, I would like to thank my family for always supporting me.

Contents

Contents

Introduction 1

1. Formulations for the eddy current problem 3 1.1 Problem definition 3 1.2 The T-, formulation 6 1.3 The A,V-A formulation 11 1.4 The A,V- formulation 15 1.5 The A,V-A- formulation 20

2. The T-, finite element formulation 23 2.1 Finite element representation of the scalar and vector T potentials 24 2.2 The Galerkins method 25 2.3 Discretization of the T-, formulation equations 28 2.4 Assembling element equations 30

2.5 Transient and harmonic analysis 32 2.6 Boundary conditions 33

2.7 Derived fields from the degree of freedom solution 36

3. Implementation in ANSYS of the T-, formulation 38 3.1 The Uec routines 39 3.2 The Uel routines 40

4. Validation of the implementation of the T-,,,, formulation 43 4.1 Conducting cube in homogeneous magnetic field 43

Contents

4.2 Hollow sphere in uniform field 48 4.3 The FELIX brick 52

5. Conclusions 60

References 61

Introduction

1

Introduction

According to Faradays law a time varying magnetic field produces an induced

electric field which causes an electric current to flow in a conducting material. If the

conducting material is not a wire filament, but rather a massive conducting body this current

is distributed inside the conductor and is referred to as eddy current.

Eddy currents occur in a wide range of electromagnetic apparatus and devices (synchronous

machines, transformers, fusion machines) and have several applications (magnetic levitation,

non destructive testing, biomedicine, induction heating).

The effect of the eddy currents can be beneficial or dangerous. For example, they are

necessary for the operation of the electric machines, such as transformers, but eddy currents

also cause harmful effects in them: the circulating currents dissipate energy through ohmic

losses and they generate a reaction magnetic field in the opposite direction of the inducting

field leading to a decrease in the machine efficiency. Also, eddy currents generate a non-

uniform current distribution in the conductors cross section causing additional losses.

On the other hand, eddy currents can have beneficial effects: they can be used in metallurgy

for induction heating by using the heat generation for melting metal objects or to control the

motion of molten metals. They have application in the magnetically levitated trains and can

be used on non destructive testing to get information about the materials homogeneity and

dimension they flow through.

A good knowledge of space and time distribution of both electric current and magnetic flux

is necessary in order to obtain efficient and economical designs of all the apparatus where

eddy currents are involved.

The interaction between electrical and magnetic field is described by the Maxwells

equations. Basically, there are two ways to solve this system of equations: analytical and

numerical methods. Unfortunately, analytical solutions are possible only for problems

involving simple two-dimensional geometries, linear media and steady state problems. Three

dimensional, nonlinear and transient problems are very difficult to be solved analytically and

algorithms exist only for specific problems [10].

The limitations of analytical methods can be overcome by using numerical techniques,

which have been developed in the last 30-40 years with the digital computing advent.

Numerical methods can handle any geometrical configuration, time-depending problems and

both linear and non-linear cases. The numerical approach consists of dividing the field

Introduction

2

region in discrete elements and re-formulating the problem in each element. There are

several numerical methods: the finite difference method, the boundary element method, the

moment method, and so on. The most powerful is the finite element method because of its

major flexibility.

Basically, the solution of the electromagnetic problem can be found re-formulating the

Maxwells equations in terms of potentials. Potentials are auxiliary functions that express

various physical properties in ways leading a more workable solution to a problem involving

partial differential equations. The potentials can be chosen in a wide variety of ways, and

this choice will affect the computational procedure of the field problem leading advantages

and disadvantages. Numerical analysts, mathematicians and engineers are involved in the

study of various formulations in order to construct efficient and economical numerical

algorithms since the system of equation to be solved is usually very large.

Three dimensional eddy current problems can be mathematically formulated in various

ways. The variable to be solved may be a vector potential, a scalar potential or a combination

of those.

Several finite element commercial codes are available on the market. The formulations they

implement are not ever generally applicable to all kind of problems and not ever are the most

convenient in terms of availability and power of computing resources.

One of them is ANSYS, which is maybe the most powerful and wide used finite element

commercial package.

For the eddy current study, ANSYS implements the magnetic vector potential formulation

which uses in the non-conducting regions three degree of freedom, the magnetic vector

potential components, and adds an extra degree of freedom, the time-integrated electric

voltage, in the conducting regions. This is the most widespread formulation in all the

electromagnetic finite e

Recommended

*View more*