Upgrade 5.600

[Sjekke 85]

Upgrade went smoothly ...  Software Version:4.600

[Sjekke 85]

Upgrade went smoothly ... 

 

Software Version:4.600

[BOT 1]

The topic has been moved from "

Please login or register to see this link.

" to "

Please login or register to see this link.

".

 

Temat został przeniesiony z "

Please login or register to see this link.

" do "

Please login or register to see this link.

".

[mib2020 0]

Upgrade went smoothly yesterday ... no issues till now.

[jwq 3]

As always, no problems with update. It remembers setting for front panel LED intensity now   

Edited July 7, 2020 by jwq

[HKrook 11]

Update went smoothly but let's see the coming days how the HC2 keep performing:-)

 

[Bari Zoltán 0]

Hi, i updated HC2 to 4.600.

 It hasn't been accessed remotely since I updated it, and the finder can't find it either.

I  can't restore to previous version because i can't download the installation file 

the third led does not light either

I can access it from the local network with the ip address

Edited July 8, 2020 by Bari Zoltán

[Bari Zoltán 0]

I can access it from the local network with the ip address

[Khutso8368 0]

Upgrade wrecked havoc with my Amazon Alexa setup. All Fibaro devices were unresponsive. Had to roll back to 4.590.

[Andrés Padrón 0]

Hello @Bari Zoltán . Did you write to Fibaro Support about this issue? I had the same problem, they performed a remote conecction through Open port of my router and fix this issue. 

 

 

[Bari Zoltán 0]

Hi Andrés, Thank You, i write them now. They did the restore to 4.590  from 4.600  ?

[Hankster 0]

Started my upgrade an hour ago.  The HC2 just says "Updating" with the spinning circle.. After refreshing the browser it seems to have hung on "Please Wait Creating backup. Uploading backup to server".  Thoughts anyone?

 

UPDATE: A waited a while longer and had to push the power button. It restarted okay and and I could try again (after a clean reboot).  Took a while but came back to life.

Software Version: 4.600.

I'll do some testing and update this thread if I find anything.

 

Edited July 11, 2020 by Hankster
Update.

[Sjekke 85]

This is how I do my upgrades and it never caused any problems.
 

Reboot HC

Make a back-up

Reboot system

Upgrade without back-up option

Automatic reboot

Make a back-up with the new firmware

Reboot system

Done

Time-consuming but effective.

 

Cheers

Sjekke

 

[Hankster 0]

On 7/11/2020 at 1:22 PM, Hankster said:

Started my upgrade an hour ago.  The HC2 just says "Updating" with the spinning circle.. After refreshing the browser it seems to have hung on "Please Wait Creating backup. Uploading backup to server".  Thoughts anyone?

 

UPDATE: A waited a while longer and had to push the power button. It restarted okay and and I could try again (after a clean reboot).  Took a while but came back to life.

Software Version: 4.600.

I'll do some testing and update this thread if I find anything.

 

All is fine. Everything appears to be working. Agree with Sjekke on the upgrade approach below.

[GuidoHermans 0]

Update wrecked my HC2

The software does not load entirely anymore with no means of rolling back because the backup option is no longer working. The Interface I get after the Recovery option is not working.

Is there a way to recover to 4.590?

[Sankotronic 2,086]

Update went smooth on all my 3 HC2. Did update a week ago and till now didn't notice any problems. Also adding z-wave devices works OK.