Keyfob doesn't wake up/work until I disconnect the battery

[imd 0]

Hello, 

I have a problem that I didn't saw it before. 

When I use my keyfob, sometime often it doesn't work at all. I need to disconnect the battery and put it back on to start it. Even if I press "O" and "+" to wake up, it doesn't show any light or doesn't make anything. 

I tried to delete it and to reinclude it but it make the same thing. 

When I reconnect the battery, I can use perfectly the scenes in my house. I configured a sleep in 60 second and make a combination for unlocking it. 

What can I do to resolve the problem ?

Thanks 

[XTeK 14]

Have you checked the battery status?

[imd 0]

Yes, it's green when I make the procedure of verification : 

 

Please login or register to see this link.

 :

Checking battery level:

KeyFob automatically warns about low battery with 3 magenta blinks.

1. Click 

   Please login or register to see this image.

    and  simultaneously.
2. Click  or  until LED glows cyan.
3. Click .
4. LED indicates battery level with a smoothly transitioning colours, where:
   • Green – 100%
   • Yellow – 50%
   • Red – 1%
5. Wait 2 second or click any button to exit.

 

[Flash 100]

On 10/19/2020 at 10:57 AM, imd said:

Yes, it's green when I make the procedure of verification

 

Remove the battery.

Wait 10 minutes.

Replace the battery.

Do battery check again.

Had also issue, with battery status. After some testing, i did like above, and the battery status was suddenly red. So I replaced the battery and issues where gone. Id I have issue's again I willl do the same again.

looks like the KeyFob doesn't realize the battery is dying.