QuickApp - Iungo Monitor

[SmartHomeEddy 778]

This Quickapp retrieves power consumption, solar production, gas usage and water flow from the Iungo Monitor, Solarpanel and Watermeter

 

(Child) Devices for Consumption, Production, Solar Power, Water Flow, Consumption High, Consumption Low, Production High, Production Low, Total Gas and Total Water FLow

 

Please login or register to see this attachment.

 

Version 1.1 (11th September 2021)

• Changed the Child Devices Consumption High, Consumption Low, Production High and Production Low to device type energyMeter to facilitate the new Energy Panel
• Added automaticaly change rateType interface of Child device Consumption High and Low to "consumption" and Production High and Low to "production"
• Changed the Main Device to device type powerSensor to show the power graphs
• Added Net Consumption to the value of the Main Device 
• Changed the Child Devices Consumption, Production and Solar Power to device type powerSensor to show the power graphs 
• Changed the Water Flow unit text from m³ to Litre
• Added the amount of m2 Solar Panels to the log text ot the Child Device Solar Power and to the labels
• Changed meterreading to automatically kWh, MWh of GWh
• Moved tarif informatie to main device log text
• Added Meter measurement for Consumption High, Consumption Low, Production High, Production Low, Gas and Water to reset the measurements
• Added Meter measurement Date for Consumption High, Consumption Low, Production High, Production Low, Gas and Water
• Removed Refresh button
• Added some extra debug information when debug level = 3

 

Version 1.0 (6th February 2021)

• Now also supports Iungo Solarpanel and Iungo Watermeter
• Added a lot of Child devices
• Added QuickApp Variable for user defined icon Mother Device
• Added QuickApp Variable for Solar Power m2
• Removed calculation and storage of energy consumption of Fibaro devices

 

Version 0.6 (22nd January 2021)

• Now also supports Iungo basic version

 

Version 0.5 (21 January 2021)

• Initial version

 

QuickApp variables (mandatory, they will be automatically added with the default values):

• IPaddress = IP address of your Iungo Monitor
• solarPanel = true or false for use of the SolarPanel module (default is false)
• waterMeter = true or false for use of the Watermeter module (default is false)
• interval = Number in seconds, the Lungo Monitor normally is updated every 10 seconds
• solarM2 = The amount of m2 Solar Panels (use . for decimals) for calculating Solar Power m2
• debugLevel = Number (1=some, 2=few, 3=all, 4=simulation mode) (default = 1)
• meterConsHigh = Last meter measurement Consumption High
• meterConsLow = Last meter measurement Consumption Low
• meterProdHigh = Last meter measurement Production High 
• meterProdLow = Last meter measurement Production Low 
• meterGas = Last meter measurement Gas 
• meterWater = Last meter measurement Water 
• meterConsHighD = Date last meter measurement Consumption High
• meterConsLowD = Date last meter measurement Consumption Low
• meterProdHighD = Date last meter measurement Production High 
• meterProdLowD = Date last meter measurement Production Low 
• meterGasD = Date last meter measurement Gas 
• meterWaterD = Date last meter measurement Water 

Please login or register to see this image.

/monthly_2021_02/icon-iungo-logo.png.f1a9aec9e6411b15d530df72f1a795bb.png" />

 

Tested with: 

• Iungo lite version
• Firmware Rev 3683 (07-01-2021)

 

Please login or register to see this attachment.

 

 

 

Download the QuickApp here (download the file and un-zip):

Please login or register to see this link.

or Fibaro Marketplace: 

Please login or register to see this link.

How to install: 

Open the Configuration Interface

Go to Settings > Devices

Click  +

Choose Other Device

Choose Upload File

Choose file from your computer with .fqa

 

 

 

 

Edited October 19, 2021 by SmartHomeEddy

[SmartHomeEddy 778]

Together with @twanve we created a first release of the quickapp to get power and gas consumption from your Iungo Monitor. 

 

Feedback is welcome. 

[Marcel38 0]

Very Nice!

As soon as I was pointed to this post I installed this quick app to my HC3.

I noticed the gas is shown a value that seems to be fixed to 300.000 M3. Is that a bug?

 

Is it also possible to add the watermeter that is also shown by Iungo?

Please login or register to see this attachment.

Please login or register to see this attachment.

Edited January 22, 2021 by Marcel38

[SmartHomeEddy 778]

6 hours ago, Marcel38 said:

Very Nice!

As soon as I was pointed to this post I installed this quick app to my HC3.

I noticed the gas is shown a value that seems to be fixed to 300.000 M3. Is that a bug?

 

Is it also possible to add the watermeter that is also shown by Iungo?

Thank you @Marcel38 

 

I will have a look at that "gas" measurement, looks strange, I have send you a personal message 

 

We are working on the next Iungo devices Solarpanel and watermeter. 

Edited January 22, 2021 by SmartHomeEddy

[twanve 18]

Check also witch version you Iungo is, the last firmware:  iungo 2013 - 2021 Rev 3683

Witch hardware version you have; Iungo lite or Iungo basic..?

Edited January 22, 2021 by twanve

[Marcel38 0]

Yes, Rev 3683 from 2021

[SmartHomeEddy 778]

@Marcel38  I looked at the strange "gas" reading. Can you set de debugLevel in the "Variable" panel from value 1 to value 3 ?

 

Then you wil see in the debug log something like this: 

Please login or register to see this code.

 

Can you copy - paste it in a reply?

 

maybe the structure is not the same

[Marcel38 0]

4 hours ago, twanve said:

Check also witch version you Iungo is, the last firmware:  iungo 2013 - 2021 Rev 3683

Witch hardware version you have; Iungo lite or Iungo basic..?

I have the more expensive version, not the lite, so I guess it is the basic version. I can control switches and other hardware with it

[Marcel38 0]

Is this the info you need?
 

 

[DEBUG] [IUNGO MONITOR ID:155]: Response data: {"ok":true,"type":"response","time":0.0039377399953082,"rv":{"propsval":[{"id":"name","value":"Kosten"},{"id":"metertype","value":"Ene"},{"id":"version","value":"5"},{"id":"serial_e","value":"999999999999999999999"},{"id":"usage","value":489},{"id":"T1","value":8945.53},{"id":"T2","value":4963.677},{"id":"-T1","value":2051.765},{"id":"-T2","value":6024.202},{"id":"L1I","value":3},{"id":"L1Pimp","value":0.489},{"id":"L1Pexp","value":0},{"id":"c_tariff","value":1},{"id":"serial_g","value":"999999999999999999999"},{"id":"gas_usage","value":0},{"id":"gas","value":3143.767},{"id":"Cost-T1","value":0.18875},{"id":"Cost-T2","value":0.18875},{"id":"Cost-nT1","value":0.18875},{"id":"Cost-nT2","value":0.18875},{"id":"Cost-gas","value":0.64413},{"id":"Gas-interval","value":300},{"id":"Client-blob","value":""},{"id":"available","value":true}]},"systime":

Please login or register to see this link.

,"seq":1,"error":false}

Edited January 23, 2021 by Marcel38

[SmartHomeEddy 778]

Yes, thanks. I will have a look

 

And found it. Apperently the basic version has a slightly different response, but I can handle it. 
 

 

Edited January 22, 2021 by SmartHomeEddy

[SmartHomeEddy 778]

A new version is available, now it also supports the "basic" version. 

[Marcel38 0]

Now the “gas” is also showing the right value! Great!

Another question: Produce, is that meant to show the power coming from the solar panels? That value remains “0”, so all calculations and values for “Net consumption” (twice in the panel), “Consumption” and “Gross consumption” are the same value.

[SmartHomeEddy 778]

The Iungo monitor doesn’t measures the actual production. So it is for future use, we are working on the solarpanel part. 

[Marcel38 0]

It actually does measure production of solar panels

Please login or register to see this attachment.

[SmartHomeEddy 778]

The device doen't gives that value through the API. These are the values the API (of your device):

 

Please login or register to see this attachment.

Edited January 23, 2021 by SmartHomeEddy

[Marcel38 0]

Now I understand.

The retrieved API info is all data coming from the actual energy meter.

Water and Solar is from a different source.

Thanks for the info.

[SmartHomeEddy 778]

You’re welcome

 

from the energy meter, but via the Iungo. The energy meter also can show actual production, but Iungo doesn’t transport with the API somehow. 
 

But no worry, something like this is comming:

 

Please login or register to see this attachment.

[okidoki 13]

Is there overlap between the P1 monitor and the iungo device? I see there is gas monitoring, but as i dont have gas it appears that they can monitor the same?

 

Edited January 27, 2021 by okidoki

[SmartHomeEddy 778]

Two different devices with sort of the same functions. I use the P1 Monitor, I don't have the Iungo monitor. The P1 Monitor can monitor energy consumption and production, gas and water. The Iungo can also. 

 

Quote

Please login or register to see this link.

The Iungo is a small device connected to the energy and gas meter to give insight in your power consumption. Enables control of usage of electricity, gas, solar, and water, and energy generation by solar panels. 

 

[pnutp0wer 22]

7 hours ago, SmartHomeEddy said:

Two different devices with sort of the same functions. I use the P1 Monitor, I don't have the Iungo monitor. The P1 Monitor can monitor energy consumption and production, gas and water. The Iungo can also. 

 

 

 

so you wrote the iungo quickapp without having one? ?

[SmartHomeEddy 778]

58 minutes ago, pnutp0wer said:

so you wrote the iungo quickapp without having one?

 

I admit, it was a challenge to do without my regular trial and error