Welcome to Smart Home Forum by FIBARO
Dear Guest,
as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.
As a member you can:
- Start new topics and reply to others
- Follow topics and users to get email updates
- Get your own profile page and make new friends
- Send personal messages
- ... and learn a lot about our system!
Regards,
Smart Home Forum by FIBARO Team
Question
adamdeluxe 0
Dear community,
I went through a lots of posts here but unfortunately I cannot find a solution for my issue.
I am operating 9 Fibaro Roller Shutter for my window blindings since 2016 in combination with a Home Center 2.
From the very beginning I had issues to calibrate the roller shutters.
If I do it from the closed position:
The shutters can be used to drive the blinding up or down. They work.
Also scenes can be set-up and the shutters are included and to what they should do, drive down and up.
Because of the lack of calibration the blinding level (0-100%) cannot be set/ used. Nigher over the slider, nor with a scene.
Now it becomes funny. Today - don´t ask me why - I created a scene to close the shutter of my office room 50% and (surprise) it has worked.
Also the calibration is working, but only with the shutter in my office room.
I tried to be smart and checked all settings/ parameters or the working shutter - I have not found any special set-ups - and checked the parameters of the "bad shutters".
I have still the same problem: I cannot calibrate the shutter and so I cannot set-up levels, nigher over the slider, nor over the scene. (just in the office room).
If you need any further information, please let me know.
Best regards
PS: I tried to change the Q1- and Q2-wires... same calibration issue and on-top wrong allocation of the commands up and down.
PPS: I also tried to play with parameter 18, I went down to 1 and up to 150... not successful
Link to comment
Share on other sites
5 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.