Jump to content

Welcome to Smart Home Forum by FIBARO

Dear Guest,

 

as you can notice parts of Smart Home Forum by FIBARO is not available for you. You have to register in order to view all content and post in our community. Don't worry! Registration is a simple free process that requires minimal information for you to sign up. Become a part of of Smart Home Forum by FIBARO by creating an account.

 

As a member you can:

  •     Start new topics and reply to others
  •     Follow topics and users to get email updates
  •     Get your own profile page and make new friends
  •     Send personal messages
  •     ... and learn a lot about our system!

 

Regards,

Smart Home Forum by FIBARO Team


  • 0

Controlling IR Based devices


Liquidchild

Question

Hi, apologies if i have posted this in the wrong section!

 

I have a projector screen, Sapphire - which works with an IR remote, it doesn't appear to have any direct control buttons on the screen casing.  Also, i have a projector in my room, again which has an IR control.  I would like to control both of these with Fibaro - is there a way (perhaps not directly, but using 3rd party products) that i can set Fibaro up to control these - for example, lower the screen and turn on the projector.

Link to comment
Share on other sites

Recommended Posts

  • 1

broad linkhub has method 

function QuickApp:learn(ipAddress, deviceType)
 
so.
lets go

Please login or register to see this image.

/monthly_2021_09/image.png.9f1a16076c48a01985dc053b6c9d1bf3.png" />
 
call from another QA 
 
fibaro.call(1948"learn""192.168.1.51"0x51da)
 

Please login or register to see this attachment.

as u can see device now in learn mode
 
tryin to pass some RC

Please login or register to see this attachment.

 

Please login or register to see this attachment.

 
yay!
 

JgBQAAABJpMTOBMSExITEhMSExITEhMSExMSOBM3EzcTNxM3EzcTOBM3EzcTEhMSEzcTEhMTEhMTEhMSEzcTNxMSEzcTOBM3EwAFGAABKEkTAA0FAAAAAAAA
 
 

@Phenix^^^^^^^^^^^^^^^^^

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

  • 0

 

Please login or register to see this code.

 

Please login or register to see this code.

 

Please login or register to see this code.

 

 

 

Please login or register to see this attachment.

Please login or register to see this attachment.

  • Thanks 1
Link to comment
Share on other sites

  • 0
25 minutes ago, Petramg said:

Please login or register to see this code.

 

I can help you with step one :P

 

Please login or register to see this link.

 

Please login or register to see this link.

 

Edited by ppeterr
Link to comment
Share on other sites

  • 0
7 minutes ago, Petramg said:

I have RM4 mini , the instructions here ,but it doesn't work on Toshiba air conditioner

 

 

I don't own the devices myself, and I don't think I can really help you with them.

On the other hand, you also have a different question than the initial topic starter.

Maybe opening your own topic will help. Good luck!
 

PS. Post there what you already have in terms of code, that might kick start the solution.

Edited by ppeterr
Link to comment
Share on other sites

  • 0
1 hour ago, Petramg said:

I have RM4 mini , the instructions here ,but it doesn't work on Toshiba air conditioner

 


1st of thank you so,much for video about my QA

2nd about toshiba - you can try to find a new codes for toshiba in GitHub here 

Please login or register to see this link.

 

another way is …. Record signal from original RC

Link to comment
Share on other sites

  • 0
8 hours ago, Petramg said:

Fibaro was a bad choice

depends on the “spacer” between the chair and the PC

  • Like 1
Link to comment
Share on other sites

  • 0
8 hours ago, Petramg said:

Please login or register to see this code.

It's not easy, that's true. But I think if you got one thing going, you might get the basics. And from there you can continue working on it.

The video explains very clearly how to get it to work. That doesn't seem like the problem to me.

I also suspect that you do not have the correct IR codes in the QA.

 

So, do you already have the Toshiba AC working with the RM4 mini and the accompanying app?

Then it is important to extract those codes from the database and apply them in the QA.

 

Another way, as mentioned above, is to learn the codes per button in the RM4 mini, then read them out and apply them.

 

And if you really think it's all too complex.

You might want to try the IFTT route.

That's a lot easier, but also a lot less fun :)

 

Edited by ppeterr
Link to comment
Share on other sites

  • 0
11 hours ago, ppeterr said:

Není to jednoduché, to je pravda. Ale myslím si, že pokud máte jednu věc v chodu, možná získáte základy. A odtud na tom můžete dál pracovat.

Video velmi jasně vysvětluje, jak jej uvést do provozu. To mi nepřipadá jako problém.

Mám také podezření, že v QA nemáte správné IR kódy.

 

Takže už máte Toshiba AC pracující s RM4 mini a doprovodnou aplikací?

Pak je důležité tyto kódy extrahovat z databáze a použít je v QA.

 

Dalším způsobem, jak je uvedeno výše, je naučit se kódy na tlačítko v RM4 mini, poté je přečíst a použít.

 

A pokud si opravdu myslíte, že je to všechno příliš složité.

Možná budete chtít vyzkoušet trasu IFTT.

Je to mnohem jednodušší, ale také mnohem méně zábavné :)

 

Please login or register to see this code.

11 hours ago, 10der said:

závisí na „mezerníku“ mezi židlí a počítačem

 

11 hours ago, 10der said:

závisí na „mezerníku“ mezi židlí a počítačem

Yes, mr. Smart

Link to comment
Share on other sites

  • 0

Well, thats good! So, we only need to know where to get the codes :)

 

And then apply them in the script.  I dont know how to do that..yet

 

Let me try some google kung-fu. Or maybe @10der is watching, and can tell you :P

 

Link to comment
Share on other sites

  • 0
3 minutes ago, ppeterr said:

Je to dobré! Potřebujeme tedy jen vědět, kde kódy získat:)

 

A pak je použijte ve skriptu. Nevím, jak to udělat ... ano

 

Zkusím trochu google kung-fu. Nebo možná@10der se dívá a může vám říct : P

 

Please login or register to see this link.

 I have no idea

Link to comment
Share on other sites

  • 0
2 minutes ago, Petramg said:

Please login or register to see this link.

 I have no idea

 

Well, i am not totally sure. But what i would do, is get the sql database file from the broadlink device. And inspect that.

Link to comment
Share on other sites

  • 0
2 minutes ago, ppeterr said:

 

No, nejsem si úplně jistý. Ale co bych udělal, je získat databázový soubor sql ze širokopásmového zařízení. A zkontrolujte to.

Please login or register to see this code.

4 minutes ago, ppeterr said:

 

Well, i am not totally sure. But what i would do, is get the sql database file from the broadlink device. And inspect that.

Thank you for your time,

Link to comment
Share on other sites

  • 0
2 minutes ago, Petramg said:

Please login or register to see this code.

 

I know, but he also reacted in this topic. And he made the broadlink quick-app. So, he maybe knows how to extract the codes.

 

 

Link to comment
Share on other sites

  • 0
8 minutes ago, 10der said:

broad linkhub has method 

function QuickApp:learn(ipAddress, deviceType)
 
so.
lets go

Please login or register to see this link.

 
call from another QA 
 
fibaro.call(1948"learn""192.168.1.51"0x51da)
 

Please login or register to see this attachment.

as u can see device now in learn mode
 
tryin to pass some RC

Please login or register to see this attachment.

 

Please login or register to see this attachment.

 
yay!
 

JgBQAAABJpMTOBMSExITEhMSExITEhMSExMSOBM3EzcTNxM3EzcTOBM3EzcTEhMSEzcTEhMTEhMTEhMSEzcTNxMSEzcTOBM3EwAFGAABKEkTAA0FAAAAAAAA
 
 

@Phenix^^^^^^^^^^^^^^^^^

Chápeš že já nevím co mi tu ukazuješ? Že nerozumím těm obrázkům, že nevím jak se píše lua, neumím to!!!!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Answer this question...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...