Sankotronic Lab - HELP NEEDED

[Sankotronic 2,085]

Hello dear Fibaro community!

 

As you know I'm working hard on

Currently I'm finishing Advanced Lighting Control (ALC) that will be much more advanced and simpler to setup and use than Very Smart Lights (VSL) and hopefully support more lighting devices. That is where I need your help.

 

WHAT I HAVE

 

At the moment I have support for following light types or devices that can control lights:

1. Fibaro relay modules of all types and versions
2. Fibaro Walli Switch
3. Fibaro Walli Socket
4. Fibaro Walli Dimmer
5. Qubino 16A wall plug
6. Neo CoolCam wall plug
7. Fibaro Dimmer 1 & 2
8. Fibaro RGBW modules
9. Aeotec LED bulb 6 Multi-color
10. Philips HUE v2 for bulb types: Ambience Color, Ambience White, Dimmable and wall plug
11. Combee 2 Zigbee USB gateway with HUE bulbs
12. Nanoleaf Aurora, Canvas and Shapes panels
13. LIFX color and dimmable bulbs
14. Twinkly LED (not supported latest firmware update yet)

 

WHAT I NEED

 

1. Z-WAVE DEVICES - I need JSON data for other producers of z-wave modules that can control lights that can be obtained from HC2 document page with link in browser: http://<YOUR_HC2_IP>/docs/#!/devices/getDevice. I need from this JSON "type" and "baseType" and "actions": {} part So I can make sure that all devices will be properly recognized and controlled.
2. OTHER LIGHT TYPES - Any other type of lights that are integrated to HC2 with virtual devices. If you have working VD then please share this VD and I can make it compatible with UHAS. If you have other type of lights, but still not integrated with HC2 let me know so I can look for solution with your help.

 

NOTE - UHAS will be ported to HC3 and if you have HC3 with some interesting devices you can also help!

 

Thank you in advance for your help! ❤️

 

Edited September 20, 2021 by Sankotronic
Added devices that I get information needed

[clowg 34]

Hi @Sankotronic

You already have the AutomationBridge Tasmota VD examples don't you?

 

Please login or register to see this image.

/monthly_2021_09/image.png.5f4e137a4ca817c117effeda8b1760be.png" /> 

[Sankotronic 2,085]

Hi @clowg

 

ALC is completely different code than VSL so if you can export this two VD and send me on PM so I can prepare them for UHAS. I know that this VD's are added by automation bridge so they don't have any way to be found by UHAS without doing some additional coding.

 

Thank you!

 

[ppeterr 202]

On 9/19/2021 at 9:26 AM, Sankotronic said:

NOTE - UHAS will be ported to HC3 and if you have HC3 with some interesting devices you can also help!

 

 

Oehhhh, cant wait    Excellent stuff your doing there!

[Sankotronic 2,085]

Hi all,

 

I have updated list of devices that I get (have) JSON data provided until now in my first post.

THANK YOU!

 

[A.Socha 112]

Write to me pm if you will need support

[Bosman 5]

 

I have this for you It's a multi color LEDstrip driver from Blebox
It is working fine in HC3

Edited September 28, 2021 by Bosman

[tinman 1,025]

 

57 minutes ago, Bosman said:

I have this for you It's a multi color LEDstrip driver from Blebox. It is working fine in HC3

 

ehm, i don't remember giving you permission to post my QuickApps .. 

 

Please login or register to see this image.

/monthly_2021_09/image.png.5dcae1be05a9b584fc464dc6f009bb5a.png" />

 

The

Please login or register to see this link.

is open, pixelbox is derivation of wlightbox

[Bodyart 229]

1 hour ago, Bosman said:

I have this for you It's a multi color LEDstrip driver from Blebox

39 minutes ago, tinman said:

ehm, i don't remember giving you permission to post my QuickApps .. 

@BosmanHow can you have it for someone, when it's copyrighted software ???

[Bosman 5]

I ditn't know it was copyrighted, I bought it from a website. it is removed.

 

[Sankotronic 2,085]

@tinman, @Bosman ,

 

I have deleted downloaded copyrighted QA and will not share it further.