FGWPB-121 change the default color behavior

[jabberwockie 0]

I have a FGWPB-121 and want to change the default behavior to be Red instead of white when triggered "on".

And green when triggered "off".  I currently have this included into my z-wave network via Vera Secure, so I'm looking for the parameters configurations to do so.

[Tim__ 112]

Have you looked in the online manual?

 

Please login or register to see this link.

 

Parameters 41 and 42.

[jabberwockie 0]

On 11/23/2021 at 10:05 AM, jabberwockie said:

I have a FGWPB-121 and want to change the default behavior to be Red instead of white when triggered "on".

And green when triggered "off".  I currently have this included into my z-wave network via Vera Secure, so I'm looking for the parameters configurations to do so.

Here for anyone with a Vera controller that want the specifics on how to do this (yes, the parameters are in the Fibaro manual, but the steps below outline the procedure for actually implementing)

1) go to the device in the Dashboard, Device Options
2) click on "Add configuration settings"> add "41" to "Variable", "4" under "Desired Value"
3) click "Save Changes" > wait for the unit/code to refresh.
4) click on "Add configuration settings"> add "42" to "Variable", "5" under "Desired Value"
5) click "Save Changes" > wait for the unit/code to refresh.
Now, when he Fibaro is "on" the light will be red., when the Fibaro is off, the light frame will be green.