zigbee List of Zigbee devices - users for users

[K.Drozynski 94]

Dear users,

 

We know that you are eager to share your thoughts regarding all Zigbee devices that you have. With so many Zigbee devices available on the market it would extremely difficult to prepare a complete list of supported Zigbee devices which would  include useful remarks.

 

For this reason we would like to encourage you to share your thoughts with other community members - let's make this a list of tested Zigbee devices created by users for users.

 

As correctly pointed out by @petergebruers (kudos to you) "A nice list for Zigbee2MQTT already exists, complete with picture, reset procedure(s) and quirks:

 

Please login or register to see this link.

 

So we can add one of those 2149 devices to our HC3, test its behaviour and report back with a link to the EXACT same device.

It is important to link to the exact same devices as the one you tested because there are many lookalikes..."

 

Regards

 

[max_fok 8]

Has anyone tried woox R7060 zigbee water irrigation timer? I’m interest on buying a couple as it works on AA battery since I don’t have wall sockets next to the balconies water taps where I have my flower pots.

Please login or register to see this image.

/monthly_2022_04/3081C254-FB7B-4829-9A9A-613303A328F4.jpeg.c97965b48ce10df5b5b43ba6a95da244.jpeg" />

[max_fok 8]

On 4/14/2022 at 12:46 AM, tinman said:

ECO-DIM.07

Please login or register to see this link.

Works as expected, includes as "com.fibaro.multilevelSwitch"

 

 

TUYA TT001ZAV20 ZC-W1-1

Please login or register to see this link.

 

Works as expected, includes as "com.fibaro.humiditySensor" and "com.fibaro.temperatureSensor", with proper battery level.

 

 

Philips HUE 929001953101

Please login or register to see this link.

Does not work as expected:
- before 5.102.23 it was color controller with warm white, now includes as com.fibaro.FGRGBW442CC, without warm white.
- toggle not working
- when switching via BT, status and color not updated, need to refresh zigbee (attached "Zigbee refresh" QuickApp)

 

 

Paul Neuhaus  100.075.74

Please login or register to see this link.

 
Does not work as expected:
- before 5.102.23 it was color controller with warm white, now includes as com.fibaro.FGRGBW442CC, without warm white.
- toggle not working
- when switching via zigbee FB, status and color not updated, need to refresh zigbee (attached "Zigbee refresh" QuickApp)
- device seems to getting offline for no reason (zigbee status refresh QuickApp does "wake it up" again),
  however one can set color and mode even if device is being displayed as offline.

 

 

Merrytek (TUYA) MSA035-Z1

Please login or register to see this link.

Please login or register to see this link.

Does not include, device class is not supported.

 

 

Please login or register to see this attachment.

 

Btw, that QA does show LQI for refreshed zigbee device, and of course other values like color_mode etc, if they exists. 

ieeeAddr stands for? And where can I find it?

[petergebruers 1,261]

2 hours ago, max_fok said:

ieeeAddr

Every ZigBee device has a unique identifier. It is like a MAC address on an ethernet controller.

 

2 hours ago, max_fok said:

And where can I find it?

You most likely don't need it and it is rarely printed on the device. But once you have joined the device it is listed on the "general" page on the HC3 web page, when you are looking at the devices page. It is after the aptly named label: "IEEE address:"

 

I use this identifier's last 4 digits to mark my devices, so if I have eg 10 door sensors in a box, I can easily know which one is which if I reset them.

[valitasca 3]

Aqara roller shade companion E1

Please login or register to see this link.

 

It is possible to pair but it cannot be used.

[tinman 1,025]

13 hours ago, max_fok said:

ieeeAddr stands for? And where can I find it?

 

this is the dev unique identification, you can find it under device general properties, e.g.:

 

Please login or register to see this image.

/monthly_2022_04/image.png.d9b30194c1c9f4e89fb08ae90d5f4c51.png" />

[max_fok 8]

16 minutes ago, tinman said:

 

this is the dev unique identification, you can find it under device general properties, e.g.:

 

Please login or register to see this link.

Thank you very much!

[max_fok 8]

Please login or register to see this link.

 SONOFF BASICZBR3. works as expected

 

Please login or register to see this link.

  SONOFF SNZB-03. works as expected

 

Please login or register to see this link.

 SONOFF SNZB-04. works as expected

 

[marcwau 30]

LEDVANCE Smart+ Candle E14 tunable white

Please login or register to see this link.

 

On/off and dimming works, but tunable colour temperature (2700-6500K) is not yet supported.

Edited April 21, 2022 by marcwau

[SDeath 63]

IKEA E1524 Tradfri Remote:

Please login or register to see this link.

 

Not working as expected, it is added into the system, but there are no controls (Yet as I understand from @petergebruers).
Batterylevel is not reported back to the HC3, also not if I remove the battery for a few seconds and put it back in.

IKEA ICPSHC24-10EU-IL-1 LED Driver:

Please login or register to see this link.

Working as expected, can be dimmed, but is instantaneous. 

IKEA ICPSHC24-30EU-IL-1 LED Driver:

Please login or register to see this link.

Working as expected, can be dimmed, but is instantaneous. 

 

The LED Drivers don't report back status to the HC3 if they are turned on by the remote.

Edited April 21, 2022 by SDeath

[NLWaard 12]

On 4/21/2022 at 1:52 PM, SDeath said:

IKEA E1524 Tradfri Remote:

Please login or register to see this link.

 

Not working as expected, it is added into the system, but there are no controls (Yet as I understand from @petergebruers).
Batterylevel is not reported back to the HC3, also not if I remove the battery for a few seconds and put it back in.

 

I have the IKEA E1810 TRADFRI Remote.

Please login or register to see this link.

 

Does not work.

Exactly the same limitations as you describe. In the block scene, I can only select 'Battery level' as trigger.

And battery level stays at 0%.

[Joep 181]

IKEA E1743 TRADFRI ON/OFF switch

Please login or register to see this link.

 

Not working, is added but does not work and battery stays at 0%.

 

IKEA LED1925G6 TRADFRI LED bulb E14 470 lumen, opal, dimmable, white spectrum, color spectrum

Please login or register to see this link.

 

Works basic, can turn on/off, dim and change some colors. Doesn't report back to HC3 when operated with the ON/OFF switch.

[rabo360 0]

Please login or register to see this link.

It doesn't work. Cannot add to HC3

[pnutp0wer 22]

Aqara Roller Shade Driver E1

Please login or register to see this link.

but with this no. AM023GLW01 / RSD-M01

 

Adds to hc3, but as generic device. Cannot be controlled. 

[sebo 0]

W dniu 19.04.2022 o 12:17, max_fok napisał:

Please login or register to see this link.

 SONOFF BASICZBR3. works as expected

 

Please login or register to see this link.

  SONOFF SNZB-03. works as expected

 

Please login or register to see this link.

 SONOFF SNZB-04. works as expected

 

Please login or register to see this link.

  SONOFF SNZB-03. does not work as expected - it worked and stopped (reset does not change the situation)

Please login or register to see this link.

  SONOFF SNZB-03. does not work as expected - it worked and stopped (reset does not change the situation)

Please login or register to see this link.

- działa ale brak wskaźnika baterii

Please login or register to see this link.

 - działa 

[jonname84 1]

SONOFF ZBMINI-L - Zigbee smart switch (no neutral)

Please login or register to see this link.

 

Working.

 

OSRAM AC0251100NJ - Smart+ switch mini

Please login or register to see this link.

 

 

Not working, is added but does not work and battery stays at 0%.

 

 

 

[lukaszbobola 0]

W dniu 12.05.2022 o 12:21, sebo napisał:

Please login or register to see this link.

  SONOFF SNZB-03. does not work as expected - it worked and stopped (reset does not change the situation)

Please login or register to see this link.

  SONOFF SNZB-03. does not work as expected - it worked and stopped (reset does not change the situation)

Please login or register to see this link.

- działa ale brak wskaźnika baterii

Please login or register to see this link.

 - działa 

Hi. Can anyone confirm SONOFF SNZB-03 to be working with HC3? 

[sebo 0]

Please login or register to see this link.

Blitzwolf BW-SHP13 works as expected

[max_fok 8]

On 5/15/2022 at 1:42 PM, lukaszbobola said:

Hi. Can anyone confirm SONOFF SNZB-03 to be working with HC3? 

It works for me but doesn’t show battery

Edited May 17, 2022 by max_fok

[lukaszbobola 0]

W dniu 17.05.2022 o 21:52, max_fok napisał:

It works for me but doesn’t show battery

I confirm SONOFF SNZB-03 and SONOFF SNZB-04 work for me in hc3, but battery level is not reported. 

[sebo 0]

18 minut temu, lukaszbobola napisał:

I confirm SONOFF SNZB-03 and SONOFF SNZB-04 work for me in hc3, but battery level is not reported. 

Gentlemen, the sensor worked for 1 day on the first connection and it hung in the "move" position and it was like that for more than 20 hours. After disconnecting it, it could not be reattached to HC3. after many attempts it worked and it works properly for the 3rd day. I don't trust the SONOFF SNZB-03.