Smart implant - analog input is not automatically refreshed on the HC2, by polling device i can refresh it

[Roland declerck 0]

Any idea what i can do to get the automatic anlog values update working again. It worked for some time and the it stopped refreshing the readings.
Polling refresh the reading but it should be events driven eg by a certain change of analog value.
 

Installation HC2 4.630, smart implant FBS222 5.2

 

regards

Roland

 

 

[jakub.jezek 350]

Hi @Roland declerck,

 

How is parameter 63 and 64 set?

 

Regards,

Jakub

[andrehj 0]

I have the same issue. (Smart Inplant firmware v5.2)
Current settings:
Parameter 63: 1 (so it should update every change of 0.1V)

Parameter 64: 60 (so it least it updates every 60 seconds, even when the changes are smaller than 0.1V)

 

But it doesn't update at all, only if I manually refresh the value (in my Z-Wave JS UI control panel).

[Fabir 64]

@andrehj

Things you can try:

-Soft reconfiguration of SI if your controller is supporting that

-Exclude / include the SI implant again

[andrehj 0]

Thanks, @Fabir

Somehow yesterday evening this issue got fixed. I haven't got a clue why or which setting did it.

Current settings (in case anyone else ever experiences problems with these analog inputs not refreshing):

20 - Analog input with internal pull-up.

21 - Analog input without internal pull-up (I do not use this input, but with this setting at least this input now reads 0).

63 - 0 - Disable

64 - 60 seconds